Advertisement

Introduction

  • Dejan RadojčićEmail author
  • Milan Kalajdžić
  • Aleksandar Simić
Chapter

Abstract

The reason for the abovementioned objectives is the authors’ belief that a large number of recently published papers are too complex to be useful in everyday practice. As a consequence, practicing naval architects in need of a power prediction, are indirectly forced to rely on commercial software whose essence is often not properly understood. Moreover, the few decades-old experimental results, MMs, etc., are often considered to be archaic, particularly by the younger engineers, and are hence frequently marginalized, although they have not been replaced by better MMs or routines.

References

  1. Almeter JM (1993) Resistance prediction of planing hulls: state of the art. Marine Technol 30(4)Google Scholar
  2. Alemeter JM (2008) Avoiding common errors in high-speed craft powering predictions. In: 6th international conference on high performance marine vehicles, NaplesGoogle Scholar
  3. Blount DL (1995) Factors influencing the selection of hard chine or round bilge hull for high froude numbers. In: Proceedings of the 3rd international conference on fast sea transportation (FAST’95), Lubeck-TravemundeGoogle Scholar
  4. Blount DL (2014) Performance by design. ISBN 0-978-9890837-1-3Google Scholar
  5. Blount DL, Fox DL (1976) Small craft power prediction. Marine Technol 13(1)Google Scholar
  6. Bojović P (1997) Resistance of AMECRC systematic series of high-speed displacement hull forms. In: High Speed Marine Vehicles Conference on (HSMV 1997), SorrentoGoogle Scholar
  7. Brizzolara S, Villa D (2010) CFD simulation of planing hulls. In: 7th international conference on high performance marine vehicles, Melbourne FloridaGoogle Scholar
  8. De Luca F, Mancini S, Miranda S, Pensa C (2016) An extended verification and validation study of CFD simulations for planing craft. Ship Res 60(2)Google Scholar
  9. Fung SC, Leibman L (1993) Statistically-based speed-dependent powering predictions for high-speed transom stern hull forms. Chesapeake Section of SNAMEGoogle Scholar
  10. Garo R, Datla R, Imas L (2012) Numerical simulation of planing hull hydrodynamics. In: SNAME’s 3rd chesapeake power boat symposium, AnnapolisGoogle Scholar
  11. Heinke HJ, Schulze R, Steinwand M (2009) SVA high speed propeller series. In: Proceedings of 10th international conference on fast sea transportation (FAST 2009), AthensGoogle Scholar
  12. Kapsenberg G (2012) The MARIN systematic series fast displacement hulls. In: 22nd international HISWA symposium on yacht design and yacht construction, AmsterdamGoogle Scholar
  13. MacPherson DM (1993) Reliable performance prediction techniques using a personal computer. Mar TechnolGoogle Scholar
  14. Molland AF, Turnock SR, Hudson DA (2011) Ship resistance and propulsion—practical estimation of ship propulsive power. Cambridge University Press. ISBN 978-0-521-76052-2Google Scholar
  15. Müller-Graf B (1997a) Part I: resistance components of high speed small craft. In: 25th WEGEMT School, Small Craft Technology, NTUA, Athens. ISBN Number: I 900 453 053Google Scholar
  16. Müller-Graf B (1997b) Part II: powering performance prediction of high speed small craft. In: 25th WEGEMT School, Small Craft Technology, NTUA, Athens. ISBN Number: I 900 453 053Google Scholar
  17. Savander BR, Maki KJ, Land J (2010) The effects of deadrise variation on steady planing hull performance. In: SNAME’s 2nd Chesapeake Power Boat Symposium, AnnapolisGoogle Scholar
  18. Savitsky D (1964) Hydrodynamic design of planing hulls. Marine Technol 1(1)Google Scholar
  19. Savitsky D (2012) The effect of bottom warp on the performance of planing hulls. In: SNAME’s 3rd Chesapeake Power Boat Symposium, AnnapolisGoogle Scholar
  20. Savitsky D (2014) Semi-Displacement Hulls – A Misnomer?. SNAME’s 4th Chesapeake Power Boat Symposium, AnnapolisGoogle Scholar
  21. Van Hees MT (2017) Statistical and theoretical prediction methods. In: Encyclopedia of maritime and offshore engineering. WileyGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Dejan Radojčić
    • 1
    Email author
  • Milan Kalajdžić
    • 2
  • Aleksandar Simić
    • 3
  1. 1.Mechanical Engineering, Department of Naval ArchitectureUniversity of BelgradeBelgradeSerbia
  2. 2.Mechanical Engineering, Department of Naval ArchitectureUniversity of BelgradeBelgradeSerbia
  3. 3.Mechanical Engineering, Department of Naval ArchitectureUniversity of BelgradeBelgradeSerbia

Personalised recommendations