Advertisement

Advanced Measurement Techniques Used in the Joined Measurement Campaign

  • Reinhard GeislerEmail author
  • D. Schanz
  • J. Agocs
Chapter
Part of the Computational Methods in Applied Sciences book series (COMPUTMETHODS, volume 52)

Abstract

A joint measurement campaign has been performed by the MARS project partners NUAA, CNRS (Poitiers) and DLR. The objective was to apply advanced measurement techniques to the actuator types which turned out to be most promising in the previous investigations. The selected devices were synthetic jet actuators from NUAA and plasma actuators from CNRS. Both actuator types were investigated in a backward facing step (BFS) geometry. Additional measurements took place using the synthetic jet actuator in a NACA-0015 profile from NUAA. For the measurements, a tomographic PIV and a long-distance microscopic stereo PIV measurement system—both capable to provide time-resolved data—have been set up by DLR in the one meter wind tunnel (1MG) at DLR Göttingen. The successful completion of this intercontinental experimental cooperation provides results which are a valuable data base for comparison with and validation of numerical methods.

Keywords

PIV Time-resolved PIV Tomographic PIV 

References

  1. 1.
    Willert CE, Gharib M (1991) Digital particle image velocimetry. Exp Fluids 10:181–193CrossRefGoogle Scholar
  2. 2.
    Elsinga GE, Scarano F, Wieneke B, van Oudheusden BW (2006) Tomographic particle image velocimetry. Exp Fluids 41(6):933–947CrossRefGoogle Scholar
  3. 3.
    Schanz D, Gesemann S, Schröder A, Wieneke B, Novara M (2013) Non-uniform optical transfer function in particle imaging: calibration and application to tomographic reconstruction. Meas Sci Technol 24:024009CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  1. 1.Institute of Aerodynamics and Flow Technology, German Aerospace Center (DLR)GöttingenGermany

Personalised recommendations