Advertisement

Mudrocks as Soft Rocks: Properties and Characteristics

  • Filipe Telmo JeremiasEmail author
  • Juan Montero Olarte
  • António B. Pinho
  • Isabel M. R. Duarte
  • Haris Saroglou
  • Mario Camilo Torres Suárez
Chapter

Abstract

Soft rocks comprise the geological materials with poor mechanical characteristics that span the range between soils and hard rocks. Mudrocks are part of the broader group of soft rocks which correspond to fine-grained, clay-rich detrital sedimentary rocks. As mudrocks constitute more than 60% of all sedimentary rocks and occur frequently in geological sequence, they are often encountered in construction sites either in their natural undisturbed state or as construction materials. Mudrocks can show a range of engineering behaviours as function of their composition and structural features; however, by reputation, they are regarded as poor engineering materials in construction displaying low strength and durability as well as susceptibility to volume changes. This chapter aims to provide a framework of the main geological and engineering geological aspects of mudrocks that control their engineering properties and behaviour. With this concern, the key controls on the formation of mudrocks, the terminology used to classify fine-grained sedimentary rocks and the main geological and geotechnical characteristics of mudrocks, including the relevant laboratory techniques are presented as well as the geological and engineering geological classifications of mudrocks are reviewed. Finally, a set of case studies of mudrocks encountered in commonly occurring civil engineering works are described.

Keywords

Soft rocks Mudrock Rock classification Laboratory testing Engineering properties Durability Weathering 

Notes

Acknowledgements

The authors would like to thank Dr. John Cripps of the University of Sheffield for the helpful suggestions and comments that result in significant improvements to this chapter.

References

  1. Andrews DE, Withiam JL, Perry EF, Crouse HL (1980) Environmental effects of slaking of surface mine spoils: Eastern and Central United States. Bureau of Mines, U.S. Department of Interior, Denver, CO, final report, 247pGoogle Scholar
  2. ASTM D422 (1998) Standard test method for particle-size analysis of soils. ASTM International. www.astm.org
  3. ASTM D7012 (2014) Standard test methods for compressive strength and elastic moduli of intact rock core specimens under varying states of stress and temperatures. ASTM International. www.astm.org
  4. ASTM D4644 (2016) Standard test method for slake durability of shales and other similar weak rocks. ASTM International. www.astm.org
  5. Bell FG, Cripps JC, Culshaw MG, Entwisle DC (1993) Volume changes in weak rocks: prediction and measurement. In: Anagnostopoulos A et al (eds) Geotechnical engineering of hard soils-soft rocks. Balkema, Rotterdam, pp 925–932Google Scholar
  6. Bell FG, Entwisle DC, Culshaw MG (1997) A geotechnical survey of some British Coal Measures mudstones with particular emphasis on durability. Eng Geol 46:115–129CrossRefGoogle Scholar
  7. Bennett RH, Bryant WR, Keller GH (1981) Clay fabric of selected submarine sediments: fundamental properties and models. J Sediment Petrol 51:217–232Google Scholar
  8. Blatt H (1982)Sedimentary petrology. Freeman, New York, 514pGoogle Scholar
  9. Blatt H, Middleton GV, Murray RC (1980) Origin of sedimentary rocks, 2nd ed. Prentice-Hall, New Jersey, 782pGoogle Scholar
  10. BS 5930 (1981) Code of practice for site investigationsGoogle Scholar
  11. CEN (2004) EN 1997-1:2004. Eurocode 7: geotechnical design part 1: general rulesGoogle Scholar
  12. CEN (2007) EN 1997-2:2007. Eurocode 7: geotechnical design part 2: ground investigation and testingGoogle Scholar
  13. Campbell CV (1967) Lamina, laminaset, bed and bedset. Sedimentology 8:7–26CrossRefGoogle Scholar
  14. Chapman DR, Wood LE, Lovell CW, Sisiliano WJ (1976) A comparative study of shale classification tests and systems. Bull Assoc Eng Geol 13:247–266Google Scholar
  15. Cripps JC, Czerewko MA (2017) The influence of diagenetic and mineralogical factors on the breakdown and geotechnical properties of mudrocks. In: Rutter EH et al (eds) Geomechanical and petrophysical properties of mudrocks. Geological Society, London, Special Publications, p 454CrossRefGoogle Scholar
  16. Cripps JC, Taylor RK (1981) The engineering properties of mudrocks. Q J Eng Geol 14:325–346CrossRefGoogle Scholar
  17. Czerewko MA, Cripps JC (2001) Assessing the durability of mudrocks using the modified jar slake index test. Q J Eng Geol Hydrogeol 34:153–163CrossRefGoogle Scholar
  18. Czerewko MA, Cripps JC (2002) The classification of mudrock durability based on index properties. In: van Rooy JL, Jeremy CA (eds) Engineering geology for developing countries. Balkema, Rotterdam, pp 182–189Google Scholar
  19. Czerewko MA, Cripps JC (2012) Mudrocks, clays and pyrite. In: Burland J et al (eds) ICE manual of geotechnical engineering, vol 36. Thomas Telford, London, pp 481–516Google Scholar
  20. De Freitas MH (1981) Introduction: mudrocks of the United Kingdom. Q J Eng Geol 14:241–242CrossRefGoogle Scholar
  21. Deen RC (1981) The need for a scheme for the classification of transitional (shale) materials. Geotech Test J 4:3–10CrossRefGoogle Scholar
  22. Deere DU, Miller RP (1966) Engineering classification and index properties for intact rock. Air Force weapons laboratory, Kirtland Air Base, New Mexico, Technical report N. AFWL-TR-65-116. University of Illinois, Urbana, 300pGoogle Scholar
  23. Deo P, Wood LE, Lovell CW (1974) Use of shale in embankments. National Research Council, Transportation Research Board, Special Report, 148, pp 87–96Google Scholar
  24. Dick JC, Shakoor A (1992) Lithologic controls of mudrock durability. Q J Eng Geol 25:31–46CrossRefGoogle Scholar
  25. Dick JC, Shakoor A, Wells N (1994) A geological approach toward developing a mudrock—durability classification system. Can Geotech J 31:17–27CrossRefGoogle Scholar
  26. Dunham RJ (1962) Classification of carbonate rocks according to depositional texture. In: Ham WE (ed) Classification of carbonate rocks, Memories of American Association of Petroleum Geologists, vol 1. American Association of Petroleum Geologists, Tulsa, pp 108–121Google Scholar
  27. Dunbar CO, Rodgers J (1957) Principles of stratigraphy. Wiley, New York, 356pGoogle Scholar
  28. Dusseault MB, Cimolini P, Soderberg H, Scafe DW (1988) Rapid index tests for transitional materials. Geotech Test J 15:281–346Google Scholar
  29. Felix C (1987) Essais et critères de choix pour des grès (molasses) de substitution lors de travaux de restauration. Chantiers/Suisse 18:419–423Google Scholar
  30. Folk RL (1968) Petrology of sedimentary rocks. Hemphill’s, Austin, 170pGoogle Scholar
  31. Franklin JA (1981) A shale rating system and tentative applications to shale performance. Transp Res Rec 790:2–12Google Scholar
  32. Franklin JA, Chandra R (1972) The slake-durability test. Int J Rock Mech Min Sci 9:325–341CrossRefGoogle Scholar
  33. Gamble JC (1971) Durability-plasticity classification of shales and other argillaceous rocks. PhD thesis, Univ. Illinois, Urbana-Champaign, 161pGoogle Scholar
  34. Istria General Consulting Ltd (2008a) Final geological design for Kalydona tunnel, Ch. 24+040 to Ch. 25+250 Section 1 (Report IR.D.T.278.B)Google Scholar
  35. Istria General Consulting Ltd (2008b) Geotechnical and evaluation report for Kalydona tunnel, Ch. 24+037 to Ch. 25+255 (Report IR.D.T.279.B)Google Scholar
  36. Istria General Consulting Ltd (2009) Temporary support design report, Ionia Odos/Kalydona tunnel. (Report IR.D.T.461.C)Google Scholar
  37. Gillott JE (1987) Clay in engineering geology. Elsevier, Amsterdam, p 468Google Scholar
  38. Geological Society of America (1995) Rock colour chart. The Geological Society of America, Boulder. 8th printingGoogle Scholar
  39. Grainger P (1984) The classification of mudrocks for engineering purposes. Q J Eng Geol 17:381–387CrossRefGoogle Scholar
  40. Hawkins AB, Pinches GM (1992) The engineering description of mudrocks. Q J Eng Geol 25:17–30CrossRefGoogle Scholar
  41. Heley W, MacIver BN (1971) Engineering properties of clay shales. Development of classifications indexes for clay shales. Technical Report N° S-71-6, vol 1. US Army, Engineering Waterways Experiment Station, Vicksburg, MS, p 89Google Scholar
  42. Hencher SR (1993) Conference summary. In: Cripps JC et al (eds) The engineering geology of weak rock. Balkema, Rotterdam, pp 499–504Google Scholar
  43. Hoek E, Bray JW (1981) Rock slope engineering, 3rd ed. Institution of Mining Metallurgy, London, 358pGoogle Scholar
  44. Hongxi L (1993) Physico-chemical properties of swelling soft rocks. In: Anagnostopoulos A et al (eds) Geotechnical engineering of hard soils-soft rocks. Balkema, Rotterdam, pp 665–670Google Scholar
  45. Hopkins TC, Deen RC (1984) Identification of shales. Geotech Test J 7:10–18CrossRefGoogle Scholar
  46. IAEG (1981) Rock and soil description and classification for engineering geological mapping. Bull Int Assoc Eng Geol 24:235–274CrossRefGoogle Scholar
  47. Ingram RL (1953) Fissility of mudrocks. Bull Geol Soc Am 64:869–878CrossRefGoogle Scholar
  48. Ingram RL (1954) Terminology for the thickness of stratification and parting units in sedimentary rocks. Bull Geol Soc Am 65:937–938CrossRefGoogle Scholar
  49. ISO 14688-1 (2017a) Geotechnical investigation and testing Identification and classification of soil. Part 1: identification and description, 23pGoogle Scholar
  50. ISO 14688-2 (2017b) Geotechnical investigation and testing. Identification and classification of soil. Part 2: principles for a classification, 11pGoogle Scholar
  51. ISO 14689 (2017c) Geotechnical investigation and testing. Identification, description and classification of rock, 21pGoogle Scholar
  52. ISO 17892-4 (2016) Geotechnical investigation and testing Laboratory testing of soil. Part 4. Determination of particle size distribution, 31pGoogle Scholar
  53. ISO 17892-12 (2018) Geotechnical investigation and testing. Laboratory testing of soil. Part 12. Determination of liquid and plastic limits. 27pGoogle Scholar
  54. ISRM (1981) Basic geotechnical description of rock masses. Int J Rock Mech Mining Sci Geomechan Abstr 18:8–110Google Scholar
  55. ISRM (1983) Characterization of swelling rock. Pergamon Press, Oxford, 3pGoogle Scholar
  56. ISRM (2007a) Determining water content, porosity, density, and related properties and swelling and slake-durability index properties. In: Ulusay R, Hudson JA (eds) The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974-2006. ISRM Turkish National Group, Ankara, pp 83–98Google Scholar
  57. ISRM (2007b) Determining uniaxial compressive strength and deformability of rock materials. In: Ulusay R, Hudson JA (eds) The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974-2006. ISRM Turkish National Group, Ankara, pp 151–156Google Scholar
  58. ISRM (2007c) Determining tensile strength of rock materials. In: Ulusay R, Hudson JA (eds) The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974-2006. ISRM Turkish National Group, Ankara, pp 177–184Google Scholar
  59. ISRM (2007d) Determining point load strength. In: Ulusay R, Hudson JA (eds) The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974-2006. ISRM Turkish National Group, Ankara, pp 121–132Google Scholar
  60. ISRM (2007e) Determination of the Schmidt rebound hardness. In: Ulusay R, Hudson JA (eds) The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974-2006. ISRM Turkish National Group, Ankara, pp 107–108Google Scholar
  61. ISRM (2007f) Laboratory testing of swelling rocks. In: Ulusay R, Hudson JA (eds) The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974-2006. ISRM Turkish National Group, Ankara, pp 199–216Google Scholar
  62. Jeremias FT (1993) Determinação das pressões de expansão em rochas argilosas. Geotecnia 68:81–88Google Scholar
  63. Jeremias FT (2000) Geological controls on the engineering properties of mudrocks of the North Lisbon Area. PhD thesis, University of Sheffield, 464pGoogle Scholar
  64. Jeremias FT, Cravidão J (2005) Slope debris during the construction works of Bucelas Arruda dos Vinhos section of A10 motorway. Proceedings of Géoline 2005, Lyon, 10pGoogle Scholar
  65. Kojima K, Saito Y, Yokokura M (1981) Quantitative estimation of swelling and slaking characteristics for soft rock mass. In: Proceedings of the international symposium on weak rock, Tokyo, pp 219–223Google Scholar
  66. Krumbein WC, Sloss LL (1951) Stratigraphy and sedimentation. W. H. Freeman and Co, San Francisco, 660pGoogle Scholar
  67. Lundegard PD, Samuels ND (1980) Field classification of fine-grained sedimentary rocks. J Sediment Petrol 50:781–786Google Scholar
  68. Lutton RJ (1977) Design and construction of compacted shales embankments. vol 3—slaking indexes for design. Federal Highway Administration, US Department of Transportation, Report n° FHWA-RD-77-1, 94pGoogle Scholar
  69. Mead WJ (1936) Engineering geology of dam sites. Transactions, 2nd international congress on large dams, Washington DC, 4, pp 183–198Google Scholar
  70. Mesri G, Cepeda-Diaz AF (1986) Residual shear strength of clays and shales. Géotechnique 36:269–274CrossRefGoogle Scholar
  71. McKee ED, Weir GW (1953) Terminology for stratification and cross-stratification in sedimentary rocks. Bull Geol Soc Am 64:381–389CrossRefGoogle Scholar
  72. Montero JM, Torres MC, Palomino CA, Cortés R (2011) Rocas lodosas de la cordillera oriental de Colombia. Boletín Colombiano de Geotecnia, 15, 63pGoogle Scholar
  73. Moon CF, Hurst CW (1984) Fabric of muds and shales: an overview. In: Stow DAV, Pipper DJW (eds) Fine-grained sediments: deep water processes and facies. Blackwell, Oxford, pp 579–593Google Scholar
  74. Morgenstern NR, Eigenbrod KD (1974) Classification of argillaceous soils and rocks. J Geotech Eng ASCE 100:1137–1156Google Scholar
  75. National Coal Board (1977) NCB cone indenter. Mining research and development establishment handbook N° 5, London, 5pGoogle Scholar
  76. NF P94-066 (2017) Coefficient de fragmentabilité des matériaux rocheuxGoogle Scholar
  77. NF P94-067 (1992) Coefficient de dégradabilité des matériaux rocheuxGoogle Scholar
  78. NF P94-068 (1998) Détermination de la valeur de blue de méthylène d’un sol ou d’un matériau rocheux par i’essai à la tacheGoogle Scholar
  79. Oliveira R (1993) Weak rock materials. In: Cripps JC et al (eds) The engineering geology of weak rock. Balkema, Rotterdam, pp 5–15Google Scholar
  80. Olivier HJ (1976) Importance of rock durability in the engineering classification of Karoo rock masses for tunnelling. In: Proceedings of the symposium on exploration for rock engineering. Balkema, Johannesburg, pp 137–144Google Scholar
  81. Olivier HJ (1979) A new engineering-geological rock durability classification. Eng Geol 14:255–279CrossRefGoogle Scholar
  82. Ordaz J, Argandoña V (1981) Swelling characteristics of some mudrocks from Asturias (Spain). In: Proceedings of the international symposium on weak rock, Tokyo, pp 231–235Google Scholar
  83. Penner E, Eden WJ, Gillott JE (1973) Floor heave due to biochemical weathering of shale. In: Proceedings of the 8th international conference on soil mechanics and foundation engineering, Moscow, pp 151–158Google Scholar
  84. Perry EF, Andrews DE (1982) Slaking modes of geologic materials and their impact on embankment stabilization. Transp Res Rec 873:22–28Google Scholar
  85. Pettijohn FJ (1975) Sedimentary Rocks, 3rd edn. Harper and Row, New York, p 628Google Scholar
  86. Picard MD (1971) Classification of fine-grained sedimentary rocks. J Sediment Petrol 41:179–195Google Scholar
  87. Pinho AB (2003) Geotechnical characterization of weak rock masses—the Baixo Alentejo Flysch Group. PhD thesis, University of Évora, 272 pGoogle Scholar
  88. Pinho AB, Duarte IMR, Rodrigues-Carvalho JA (2007) The Baixo Alentejo (Portugal) flysch rocks: physical properties and correlations. In: Proceedings of the 11th congress of international society for rock mechanicsGoogle Scholar
  89. Pinho AB, Duarte IMR, Rosa FRS, Rodrigues-Carvalho JA (2015) Influence of anisotropy on the mechanical properties of Baixo Alentejo flysch rocks (Portugal), The 13th ISRM Congress, Montréal, QC, Canada, 10-13 May 2015. In: Proceedings of the 13th congress of international society for rock mechanicsGoogle Scholar
  90. Pinho AB, Rodrigues-Carvalho JA, Gomes CF (2004) State of rock weathering evaluation by index tests. In: Proceedings of the 9th national geotechnical congress, pp 199–208Google Scholar
  91. Pinho AB, Rodrigues-Carvalho JA, Gomes CF, Duarte IMR (2009) Overview of the evaluation of the state of rock weathering by visual inspection. In: Culshaw MG et al (eds) Engineering geology for tomorrow’s cities. Geological Society Engineering Geology Special Publications, London, p 22Google Scholar
  92. Potter PE, Maynard JB, Depetris PJ (2005) Mud and mudstone, introduction and overview. Springer-Verlag, Berlin, 297pGoogle Scholar
  93. Potter PE, Maynard JB, Pryor WA (1980) The sedimentology of shale: a study guide and reference source. Springer Verlag, New York, p 306CrossRefGoogle Scholar
  94. Pryor WA (1975) Biogenic sedimentation and alteration of argillaceous sediments in shallow marine environments. Geol Soc Am Bull 86:1244–1254CrossRefGoogle Scholar
  95. Requetim L, Pinho AB, Duarte IMR, Lopes L, Valente AR (2006) Stability analysis of an excavation slope in Odemira. In: Proceedings of the 7th national geological congress. University of ÉvoraGoogle Scholar
  96. Rocha M (1977) Alguns problemas relativos à mecânica das rochas dos materiais de baixa resistência. Memory 491, LNEC, LisboaGoogle Scholar
  97. Rodrigues JD (1988) Proposed geotechnical classification of carbonate rocks based on Portuguese and Algerian examples. Eng Geol 25:33–43CrossRefGoogle Scholar
  98. Rodrigues JD, Jeremias FT (1989) Contribuição para o estudo das rochas grauvacóides e para a avaliação da sua durabilidade. Internal report 101/89-NP, LNEC, LisboaGoogle Scholar
  99. Rodrigues JD, Jeremias FT (1990) Assessment of rock durability through index properties. In: Proceedings of the 6th congress of the international association of engineering geology, pp 3055–3060Google Scholar
  100. Russell DJ (1982) Controls on shale durability: the response of two Ordovician shales in the slake durability test. Can Geotech J 19:1–13CrossRefGoogle Scholar
  101. Sarman R, Shakoor A (1990) Prediction of volumetric increase of selected mudrocks. In: Proceedings of the 6th congress of the international association of engineering geology, Amsterdam, pp 459–465Google Scholar
  102. Sarman R, Shakoor A, Palmer DF (1994) A multiple regression approach to predict swelling in mudrocks. Bull Assoc Eng Geol 31:107–121Google Scholar
  103. Saroglou H, Steiakakis C (2010) Experimental analysis of the uniaxial compressive strength of anisotropic layered flysch type rocks and suggestions for use in the GSI classification. In: 6th Hellenic conference of geotechnical and geoenvironmental engineering, Vólos, pp 243–250Google Scholar
  104. Shakoor A, Brock D (1987) Relationship between fissility, composition and engineering properties of selected shales from northeast Ohio. Bull Assoc Eng Geol 24:363–379Google Scholar
  105. Spears DA (1980) Towards a classification of shale. J Geolog Soc 137:125–129CrossRefGoogle Scholar
  106. Stow DAV (1981) Fine-grained sediments: terminology. Q J Eng Geol 14:243–244CrossRefGoogle Scholar
  107. Stow DAV, Piper DJW (1984) Deep-water fine-grained sediments: history, methodology and terminology. In: Stow DAV, Pipper DJW (eds) Fine-grained sediments: deep water processes and facies. Blackwell, Oxford, pp 3–16Google Scholar
  108. Strohm WE, Bragg GH, Ziegler TW (1978) Design and construction of compacted shale embankments: Volume 5 - Technical guidelines. Federal Administration, US Department of Transportation Research Record, 790:33-41Google Scholar
  109. Taylor RK (1988) Coal measures mudrocks: composition, classification and weathering processes. Q J Eng Geol 21:85–99CrossRefGoogle Scholar
  110. Taylor RK, Cripps JC (1984) Mineralogical controls on volume change. In: Attewell PB, Taylor RK (eds) Ground movements and their effects on structures. Surrey University Press, Glasgow, pp 268–302Google Scholar
  111. Taylor RK, Cripps JC (1987) Weathering effects: slopes in mudrocks and over-consolidated clays. In: Anderson MG, Richards KS (eds) Slope stability. Wiley, New York, pp 405–445Google Scholar
  112. Taylor RK, Smith TJ (1986) The engineering geology of clay minerals: swelling, shrinking and mudrock breakdown. Clay Miner 21:235–260CrossRefGoogle Scholar
  113. Taylor RK, Spears DA (1970) The breakdown of British coal measures rocks. Int J Rock Mech Min Sci 7:481–501CrossRefGoogle Scholar
  114. Taylor RK, Spears DA (1981) Laboratory investigation of mudrocks. Q J Eng Geol 14:291–309CrossRefGoogle Scholar
  115. Torres MC, Alarcón A (2007) Some aspects of degradability of argillaceous rocks. In: Estire J, Olalla C (eds) Preservation of natural stone and rock weathering. Taylor & Francis Group, London, pp 67–47Google Scholar
  116. Tourtelot HA (1960) Origin and use of the word “shale”. Am J Sci 258-A:335–343Google Scholar
  117. Tucker ME (1994) Sedimentary petrology, 2nd ed. Blackwell, Oxford, 260pGoogle Scholar
  118. Underwood LB (1967) Classification and identification of shales. J Soil Mech Found Div ASCE 93:97–116Google Scholar
  119. Venter JP (1998) An overview of the engineering properties and the use of mudrock in road construction in South Africa. In: Proceedings of the 8th congress of the international association of engineering geology, pp 2785–2796Google Scholar
  120. Weaver CE (1980) Fine-grained rocks: Shale or physilites. Sedimentary Geology 27:301-313CrossRefGoogle Scholar
  121. Weaver CE (1989) Clays, muds and shales. Developments in sedimentology 44. Elsevier, Amsterdam, 819pGoogle Scholar
  122. Wentworth CK (1922) A scale of grade and class terms for clastic sediments. J Geol 30:377–392CrossRefGoogle Scholar
  123. Wood LE, Deo P (1975) A suggested system for classifying shale materials for embankments. Bull Assoc Eng Geol 12:39–55Google Scholar
  124. Yiouta-Mitra P, Steiakakis C, Merziotis D, Nomikos PP, Sofianos AI (2011) “Ionia Odos: tunnelling through undisturbed anisotropic flysch formation”, 1st scientific congress on tunnels and underground structures in South-Eastern Europe, “Using Underground Space”, DubrovnikGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • Filipe Telmo Jeremias
    • 1
    Email author
  • Juan Montero Olarte
    • 2
  • António B. Pinho
    • 3
  • Isabel M. R. Duarte
    • 3
  • Haris Saroglou
    • 4
  • Mario Camilo Torres Suárez
    • 2
  1. 1.Laboratório Nacional de Engenharia CivilLisbonPortugal
  2. 2.Universidad Nacional de Colombia-BogotáBogotáColombia
  3. 3.University of ÉvoraÉvoraPortugal
  4. 4.National Technical University of AthensAthensGreece

Personalised recommendations