Advertisement

Perspectives of WPCB Recycling

  • Muammer Kaya
Chapter
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

Economic, environmental, and marketability perspectives of WPCB recycling are introduced in this chapter. Comparison of primary ore mining with secondary urban mining (e-waste recycling) shows significant advantages of urban mining. Recycling is a key contributor to sustainable circular economy. Recycling, urban mining, and enhanced landfill mining close the material loop. Market for recycling technologies and eco-design guidelines for manufacturing are presented. Limitations of current e-waste/WPCB recycling technologies and emerging future development perspectives toward sustainability and zero-waste scheme are also explained in detail.

Developments of new separation and extraction methods should consider increase in recovery rates and separation efficiency; better automatic control; lower time consumption, labor force, investment, and operating costs; and environmental impacts simultaneously. Developed new WPCB recycling methods should take into account industrial applicability potential, automation in pretreatment, reducing processes and reagents, and paying more attention to nonmetallic fraction. WPCBs should be regarded as important secondary material sources for achieving higher sustainability under the context of circular economy. There is almost no mature technique for ECs recycling currently.

Keywords

Economy perspective  Environmental perspective  Marketability perspective  Eco-design  Future developments 

References

  1. 1.
    Hagelüken C, Buchart M, Ryan P (2009) Materials flow of platinum group metals in Germany. Int J Sustain Manufact 1(13):330–346.  https://doi.org/10.1504/IJSM.2009.023978CrossRefGoogle Scholar
  2. 2.
    Sun Z, Xiao Y, Sietsma J, Agetrhuis H, Yang Y (2017) A cleaner process for selective recovery of valuable metals from electronic waste of complex mixtures of end-of-life electronic products. Environ Sci Technol ACS 49:7981–7988.  https://doi.org/10.1021/acs.est.5b01023CrossRefGoogle Scholar
  3. 3.
    Ning C, Lin CSK, Hui DCW (2017) Waste printed circuit board (PCB) recycling techniques. Top Curr Chem (Z) 375:43.  https://doi.org/10.1007/s41061-017-0118-7CrossRefGoogle Scholar
  4. 4.
    Jones PT, Van Gerven T et al (2011) CR3: Cornerstone to the sustainable inorganic materials management (SIM2) partners research program at K.U.Leuven. JOM 63(12):14–15CrossRefGoogle Scholar
  5. 5.
    Hagelüken C (2014) High-tech recycling of critical metals: opportunities and challenges, American Association for the Advancement of Science 2015 Annual Meeting (AAAS), Chicago. Feb. High-tech recycling of critical metals: opportunities and challenges. Available from: https://www.researchgate.net/ publication/267541171_High-Tech_Recycling_of_Critical_Metals_Opportunities_and_Challenges. Accessed 19 March 2018
  6. 6.
  7. 7.
    Yang C, Li J, Tan Q, Liu L, Dong Q (2017) Green process of metal recycling: coprocessing waste printed circuit boards and spent tin stripping solution. ACS Sustain Chem Eng 5:3524–3535.  https://doi.org/10.1021/acssuschemeng.7b00245CrossRefGoogle Scholar
  8. 8.

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  • Muammer Kaya
    • 1
  1. 1.Mining Engineering DepartmentEskisehir Osmangazi UniversityEskisehirTurkey

Personalised recommendations