Advertisement

Model-Based Approach for Predicting Thermal Damage in Bone Drilling

  • Albert J. Shih
  • Bruce L. Tai
  • Rui Li
Chapter

Abstract

Temperature and exposure time are two critical factors in determining bone thermal damage. However, the majority of existing models are two-dimensional and made only for single-pass drilling, which cannot be expanded to analyze thermal interactions between multiple drilling passes and the overall temperature field in a 3D complex bone geometry. Further, there does not exist a damage model to incorporate temperature and time effect to predict the necrosis. This chapter presents a 3D finite element thermal model, based on the previous chapters, and a thermal damage criterion to estimate necrosis in bone drilling, particularly for sequential, multiple hole drilling in bone.

Keywords

Bone necrosis Bone drilling Bone thermal damage criterion 

References

  1. 1.
    Davidson SRH, James DF (2003) Drilling in bone: modeling heat generation and temperature distribution. J Biomech Eng 125:305–314CrossRefGoogle Scholar
  2. 2.
    Lee J, Rabin Y, Ozdoganlar O (2011) A new thermal model for bone drilling with applications to orthopaedic surgery. Med Eng Phys 33:1234–1244CrossRefGoogle Scholar
  3. 3.
    Matthews LS, Hirsch C (1972) Temperatures measured in human cortical bone when drilling. J Bone Joint Surg 54:297–308CrossRefGoogle Scholar
  4. 4.
    Berman A, Reid J, Yanicko DJ, Sih G, Zimmerman M (1984) Thermally induced bone necrosis in rabbits, relation to implant failure in humans. Clin Orthop Relat Res 186:284–292Google Scholar
  5. 5.
    Bertollo N, Walsh WR (2011) Drilling of bone: practicality, limitations and complications associated with surgical drill-bits. In: Biomechanics in applications. IntechOpen: INTECH Open Access Publisher, London, pp 855–861Google Scholar
  6. 6.
    Tai B, Palmisano A, Belmont B, Irwin T, Holmes J, Shih A (2015) Numerical evaluation of sequential bone drilling strategies based on thermal damage. Med Eng Phys 37:855–861CrossRefGoogle Scholar
  7. 7.
    Bono M, Ni J (2002) A model for predicting the heat flow into the workpiece in dry drilling. J Manuf Sci Eng 124:773–777CrossRefGoogle Scholar
  8. 8.
    Tai BL, Kao Y-T, Payne N, Zheng Y, Chen L, Shih AJ (2018) 3D printed composite for simulating thermal and mechanical responses of the cortical bone in orthopaedic surgery. Med Eng Phys 61:61–68CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Albert J. Shih
    • 1
  • Bruce L. Tai
    • 2
  • Rui Li
    • 3
  1. 1.Mechanical EngineeringUniversity of MichiganAnn ArborUSA
  2. 2.Mechanical EngineeringTexas A&M UniversityCollege StationUSA
  3. 3.China Aerospace Science and Technology CorporationBeijingChina

Personalised recommendations