Advertisement

Thermal Analysis of Bone Drilling in Orthopaedic Surgery

  • Albert J. Shih
  • Bruce L. Tai
  • Rui Li
Chapter

Abstract

In this chapter, the topic is switched from metal drilling in the factory to bone drilling in the operation room at the hospital. Orthopaedic surgeons perform bone drilling in daily surgical operations. Bone drilling is common for screw placement, microfracture, or for surface preparation to aid in joint fusion, in which multiple sequential passes are made. This chapter studies and compares the heat generation among different surgical drills and investigates the sequential drilling of bone using a clinically relevant environment. The heat generated by standard drills has been studied, including the effects of the drill diameter, speed, and feed rate. The experimental methods, sample preparation, and analysis method for cadaveric bone drilling are elaborated.

Keywords

Bone drilling Bone temperature Orthopaedic drill 

References

  1. 1.
    Pandey RK, Panda SS (2013) Drilling of bone: a comprehensive review. J Clin Orthop Trauma 4:15–30CrossRefGoogle Scholar
  2. 2.
    Baron R, Horne WC (2005) Bone resorption: regulation of osteoclast activity. In: Bronner F, Farach-Carson MC (eds) Topics in bone biology. Springer, London, pp 34–57Google Scholar
  3. 3.
    Augustin G, Davila S, Udiljak T, Vedrina DS, Bagatin D (2009) Determination of spatial distribution of increase in bone temperature during drilling by infrared thermography: preliminary report. Arch Orthop Trauma Surg 129:703–709CrossRefGoogle Scholar
  4. 4.
    Matthews LS, Hirsch C (1972) Temperatures measured in human cortical bone when drilling. J Bone Joint Surg 54:297–308CrossRefGoogle Scholar
  5. 5.
    Noble B (2003) Bone microdamage and cell apoptosis. Eur Cell Mater 6:46–55CrossRefGoogle Scholar
  6. 6.
    Augustin G, Zigman T, Davila S, Udilljak T, Staroveski T, Brezak D, Babic S (2012) Cortical bone drilling and thermal osteonecrosis. Clin Biomech 27:313–325CrossRefGoogle Scholar
  7. 7.
    Augustin G, Davila S, Mihoci K, Udiljak T, Vedrina DS, Antabak A (2008) Thermal osteonecrosis and bone drilling parameters revisited. Arch Orthop Trauma Surg 128:71–77CrossRefGoogle Scholar
  8. 8.
    Abouzgia MB, Symington JM (1996) Effect of drill speed on bone temperature. Int J Oral Maxillofac Surg 25:394–399CrossRefGoogle Scholar
  9. 9.
    Lee J, Ozdoganlar OB, Rabin Y (2012) An experimental investigation on thermal exposure during bone drilling. Med Eng Phys 34:1510–1520CrossRefGoogle Scholar
  10. 10.
    Palmisano A, Tai B, Belmont B, Irwin T, Shih AJ, Holmes JR (2014) Comparison of cortical bone drilling induced heat production among common drilling tools. J Orthop Trauma 29:188–193CrossRefGoogle Scholar
  11. 11.
    Palmisano AC, Tai BL, Belmont B, Irwin TA, Shih AJ, Holmes JR (2016) Heat accumulation during sequential cortical bone drilling. J Orthop Res 34:463–470CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Albert J. Shih
    • 1
  • Bruce L. Tai
    • 2
  • Rui Li
    • 3
  1. 1.Mechanical EngineeringUniversity of MichiganAnn ArborUSA
  2. 2.Mechanical EngineeringTexas A&M UniversityCollege StationUSA
  3. 3.China Aerospace Science and Technology CorporationBeijingChina

Personalised recommendations