Advertisement

Modular, Underactuated Anthropomorphic Robot Hand with Flexible Fingers and Twisted String Actuators

  • Muhammad Faiz RahmanEmail author
  • Kaiqiang Zhang
  • Guido Herrmann
Conference paper
Part of the Lecture Notes in Computer Science book series (LNCS, volume 11650)

Abstract

For general grasping, a strong lightweight and compact robot hand needs to be designed as a robot end effector. This paper describes the design of a 3D printed anthropomorphic robot hand that actuates flexible fingers using Twisted String Actuators (TSAs). A total of 6 of these actuators were fitted within a limited confined space, the palm of the hand. This gives the hand 6 Degrees of Freedom (DOFs) 2 in the thumb and 1 in each of the other fingers. A simple modular design was used which allows for rapid prototyping of different finger designs with respect to different requirements at low cost. In this paper, only power grasping is considered for simplicity. The hand is capable of performing both spherical and cylindrical grasps whereby the flexible nature of the fingers allows for forming around the geometry of a target object. The maximum holding load of the hand was found to be 10 kg in performance tests.

Keywords

Twisted string actuators Additive manufacturing Flexible fingers Anthropomorphic robot hand 

References

  1. 1.
    Alba, D., Armada, M., Ponticelli, R.: An introductory revision to humanoid robot hands. In: Armada, M.A., de Santos, P.G. (eds.) Climbing and Walking Robots. Springer, Heidelberg (2005).  https://doi.org/10.1007/3-540-29461-9_69CrossRefGoogle Scholar
  2. 2.
    Chang, S.-L., Lee, J.-J., Yen, H.-C.: Kinematic and compliance analysis for tendon-driven robotic mechanisms with flexible tendons. Mech. Mach. Theory 40(6), 728–739 (2005).  https://doi.org/10.1016/j.mechmachtheory.2004.11.003CrossRefzbMATHGoogle Scholar
  3. 3.
    Kremer, S.R.: Twisted Cord Actuator. US Pat. 4843921, 4 July 1989, filed 18 April 1988Google Scholar
  4. 4.
    Micro Metal Gearmotor HPCB 6V with Extended Motor Shaft. https://www.pololu.com/product/3075. Accessed 5 Nov 2018
  5. 5.
    Body Segment Data. https://exrx.net/Kinesiology/Segments. Accessed 5 Nov 2018
  6. 6.
    Godler, I., Sonoda, T., Miyamoto, H.: Twisted Strings Based Robotic Hand and Eyes. http://www-lar.deis.unibo.it/people/gpalli/TwistedString_Workshop/Godler-IROS2016.pdf
  7. 7.
    PLA MSDS. ampolumer.com
  8. 8.
    NinjaTek: NinjaFlex Safety Data Sheet 2016Google Scholar
  9. 9.
    Cutkosky, M.R.: On grasp choice, grasp models, and the design of hands for manufacturing tasks. IEEE Trans. Robot. Autom. 5(3), 269–279 (1989)MathSciNetCrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Mechanical EngineeringUniversity of BristolBristolUK

Personalised recommendations