Advertisement

Steels

  • Stefano Gialanella
  • Alessio Malandruccolo
Chapter
Part of the Topics in Mining, Metallurgy and Materials Engineering book series (TMMME)

Abstract

Although steel density can be regarded as a limit to aerospace applications of these alloys, they have always been used in this field, for both structural and engine components. In fact, although the introduction and development of light alloys and polymer matrix composites, as well as high-temperature materials like Co-, Fe-, and Ni-based superalloys, had consequences on the percentage of steel employed in aircraft structures; still, for some components, steels continue to be the best choice. This chapter is dedicated to these alloys, as concerns their metallurgy, processing, and relevant properties. Some of the processes are actually the same used for other alloys, like titanium alloys and superalloys. The chapter contains also a detailed description of selected families of steels of interest for specific aerospace applications. Their performance requirements and relevant steel grade used to meet them are also provided.

References

  1. Angel T J (1954) Formation of martensite in austenitic stainless steels. ISIJ International (Japan) 177: 165–174Google Scholar
  2. Ashby M F (2005) Materials – A brief History. Philosophical Magazine Letters 88 (9–10): 749–755Google Scholar
  3. Ashcroft N W, Mermin N D (1988) Solid State Physics. HRW International Editions, Hong KongGoogle Scholar
  4. ASM International (1992) ASM Handbook Vol. 3 – Alloy phase diagrams. ASM International, Materials Park, OhioGoogle Scholar
  5. ASM International (1993) ASM Handbook Vol. 1 – Properties and Selection: Iron, Steel and High Performance Alloys. ASM International, Materials Park, OhioGoogle Scholar
  6. ASM International (2008) ASM Handbook Vol. 15 – Casting. ASM International, Materials Park, OhioGoogle Scholar
  7. ASM International (2016) ASM Handbook Vol. 4E – Heat treating of Nonferrous Alloys. ASM International, Materials Park, OhioGoogle Scholar
  8. Bhadeshia H. K. D. H, Honeycombe R. W. K. (2006) Steels – Microstructure and Properties, 3rd edn. Butterworth-Heinemann, OxfordGoogle Scholar
  9. Boxman R L et al (1996) Handbook of Vacuum Arc Science and Technology: Fundamentals and Applications. Noyes Publications, Park Ridge, New JerseyGoogle Scholar
  10. Boyce M P (2012) Gas Turbine Engineering Handbook, 4th edn. Butterworth-Heinemann, OxfordGoogle Scholar
  11. Buchwald V F, Mosdal G (1985) Meteoric Iron, Telluric Iron and Wrought in Greenland. Man & Society 9: 3–49Google Scholar
  12. Callister W, Rethwisch D (2012) Fundamentals of Materials Science and Engineering: An Integrated Approach, 4th edn. John Wiley & Sons LtdGoogle Scholar
  13. Campbell F (2006) Manufacturing Technology for Aerospace Structural Materials. ElsevierGoogle Scholar
  14. Campbell F (2008) Elements of Metallurgy and Engineering Alloys. ASM InternationalGoogle Scholar
  15. Cantor B et al (2001) Aerospace Materials. Institute of Physics PublishingGoogle Scholar
  16. Chandler H (1996) Heat Treater’s Guide – Practices and Procedures for Nonferrous Alloys. ASM InternationalGoogle Scholar
  17. Cobb H M (2010) The History of Stainless Steel. ASM InternationalGoogle Scholar
  18. Cutler J (2005) Understanding Aircraft Structures, 4th edn. Wiley-BlackwellGoogle Scholar
  19. De Cicco H, Luppo M, Gribaudo L et al (2004) Microstructural Development and Creep Behavior in A286 Superally. Materials Characterization 52: 85–92CrossRefGoogle Scholar
  20. Demeri M (2013) Advanced High-strength Steels: Science, Technology and Applications. ASM InternationalGoogle Scholar
  21. Donachie M, Donachie S (2002) Superalloys, a Technical Guide. ASM InternationalGoogle Scholar
  22. Everhart J L (1971) Engineering Properties of Nickel and Nickel Alloys. Plenum Press, New YorkCrossRefGoogle Scholar
  23. Fan s et al (2016) Progress of Ceramic Matrix Composites Brake Materials for Aircraft Applications. Reviews on Advanced Materials Science 44 (4): 313–325Google Scholar
  24. Farrar J (2004) The Alloy Tree – A guide to Low-Alloy Steels, Stainless Steels and Nickel-base Alloys. Woodhead Publishing Limited and CRC PressGoogle Scholar
  25. Federal Aviation Administration (2012) Aviation Maintenance Technician Handbook-Airframe Volume 2. Federal Aviation AdministrationGoogle Scholar
  26. Flint G, Oldfield J, Dautovich D P (2010) Corrosion of Iron Nickel Alloys and Maraging Steel. Shreir’s Corrosion: 1789–1801Google Scholar
  27. Flower H (1995) High Performance Materials in Aerospace. Springer-Science+Business MediaGoogle Scholar
  28. Gatt A et al (2017) Hydro-Mechanical Coupling in Unstable Aircraft Braking Systems. In: Harvie J M, Bawersad J (ed) Shock & Vibration, Aircraft/Aerospace, Energy Harvesting, Acoustics & Optics, Volume 9 – Proceedings of the 35th IMAC, A Conference and Exposition on Structural Dynamics, Garden Grove, California, 2017Google Scholar
  29. Graves J (1994) Effect of Heat Treatment on the Microstructure and Properties of AerMet 100 Steel. Army Research Laboratory. Available via DIALOG. https://apps.dtic.mil/dtic/tr/fulltext/u2/a284387.pdf Accessed 30 March 2019
  30. Harnoy A (2003) Bearing Design in Machinery. Marcel Dekker IncGoogle Scholar
  31. Hosford W F (2010) Physical Metallurgy. CRC Press, Boca RatonCrossRefGoogle Scholar
  32. Hosford W F (2012) Iron and Steel. Cambridge University Press, CambridgeCrossRefGoogle Scholar
  33. Jetley S (2007) Martempering to Improve Wear Properties of Aircraft Brake Steel Rotors. Journal of Industrial Technology 23 (2)Google Scholar
  34. Kaieda Y, Oguchi A (1985) Strain-induced transformation and plastic deformation behavior of a 17Cr-7Ni-1Al steel at high hydrostatic pressure. Journal of Materials Science 20: 1847–1858CrossRefGoogle Scholar
  35. Leitner H et al. (2011) Strengthening behavior of Fe–Cr–Ni– Al–(Ti) maraging steels. Materials Science and Engineering A, Structural Materials Properties, Microstructure and Processing 528(15): 5264–5270CrossRefGoogle Scholar
  36. Llewellyn D T, Hudd R C (1995) Steels: Metallurgy and Applications 3rd edn. Butterworth-HeinemannGoogle Scholar
  37. Madias J (2013) Electric Arc Furnace. In: Seetharaman S (ed) Treatise on Process Metallurgy Volume 3: Industrial Processes. Elsevier, p 271–300Google Scholar
  38. Meetham G W (1981) The Development of Gas Turbine Materials. Applied Science Publishers Ltd, LondonCrossRefGoogle Scholar
  39. Megson T (2013) Aircraft Structures for Engineering Students, 5th edn. Butterworth-Heinemann, OxfordGoogle Scholar
  40. Miller M K, Burke M G (1991) Characterization of copper precipitation in a 17/4PH steel: a combined APFIM/TEM study. In: Proc. 5th Intern Conf Environ Degrad Mater Nucl Power Syst React, LaGrange Park, 1991Google Scholar
  41. Mitchell A (2005) Solidification in Remelting Processes. Materials Science and Engineering A 413–414: 10–18CrossRefGoogle Scholar
  42. Moshka O et al (2015) Adressing the Issue of Precipitates in Maraging Steels – Unambiguous Answer. Materials Science and Engineering A 638: 232–239CrossRefGoogle Scholar
  43. Mouritz A (2012) Introduction to Aerospace Materials. Woodhead Publishing LimitedGoogle Scholar
  44. Narottam B, Boccaccini A (2012) Ceramic and Compostites Processing Methods. John Wiley & Sons LtdGoogle Scholar
  45. Novotny P, Maurer G (2007) Ultra High Strengh Steels vs Titanium Alloys. Advanced Materials and Processing 165(11): 37–40Google Scholar
  46. Pardal JM et al (2005) Modeling of precipitation hardening during the aging and overaging of 18Ni–Co–Mo–Ti maraging 300 steel. Journal of Alloys Compounds 393(1–2):109–113CrossRefGoogle Scholar
  47. Pepperhoff W, Acet M (2001) Constitution and Magnetism of Iron and its Alloys. Springer, Berlin HeidelbergCrossRefGoogle Scholar
  48. Prasad E N, Wanhill R (2017) Aerospace Materials and Material Technologies Volume 1: Aerospace Materials. SpringerGoogle Scholar
  49. Prasad E N, Wanhill R (2017) Aerospace Materials and Material Technologies Volume 2: Aerospace Material Technologies. SpringerGoogle Scholar
  50. Rolls-Royce (1996) The Jet Engine 5th edition. Rolls-Royce plc, DerbyGoogle Scholar
  51. Sarip S et al (2013) Analysis of the Transient Thermomechanical Behaviour of a Ligthweight Brake Disc for a Regenerative Braking System. In: SAE-China, FISITA (eds) Proceedings of the FISITA 2012 World Automotive Congress Volume 8: Vehicle Design and Testing (II). Lecture Notes in Electrical Engineering, vol 196. Springer, Berlin, Heidelberg, p 1075–1088Google Scholar
  52. Saul G, Roberson J A, Adair A M (1970) The effects of thermal treatment on the austenitic grain size and mechanical properties of 18 Pct Ni maraging steels. Metallurgical and Materials Transactions B 1 (2): 383–387CrossRefGoogle Scholar
  53. Savoie M, Esnouf C, Fournier L et al (2007) Influence of Ageing Heat Treatment on Alloy A-286 Microstructure and Stress Corrosion Cracking Behavior in PWR primary water. Journal of Nuclear Materials 360; 222–230CrossRefGoogle Scholar
  54. Schifo J F, Radia J T (2004) Theoretical/Best Practice Energy Use In Metalcasting Operations. U.S. Department of Energy Industrial Technologies Program, Washington, DCCrossRefGoogle Scholar
  55. Scott D (1969) The Effect of Steelmaking, Vacuum Melting and Casting Techniques on the Life or Rolling Bearings. Vacuum 19(4):167–169CrossRefGoogle Scholar
  56. Service Steel Aerospace Corp. (2016) AerMet ® 100 Alloy Data Sheet. Available via DIALOG. https://www.ssa-corp.com/documents/Data%20Sheet%20AerMet100.pdf. Accessed 16 April 2017
  57. Sha W, Guo Z (2009) Maraging steels – Modeling of microstructure, properties and applications. CRC PessGoogle Scholar
  58. Shi X, Zeng W et al (2016) Study of the Microstructure and Mechanical Properties of AerMet 100 Steel at the Tempering Temperature around 482 °C. Journal of Alloys and Compounds 679: 184–190CrossRefGoogle Scholar
  59. Soares C (2015) Gas Turbines: A Handbook of Air, Land and Sea Applications, 2nd edn. Butterworth-HeinemannGoogle Scholar
  60. Speck J A (2015) Mechanical Fastening, Joining and Assembly. CRC PressGoogle Scholar
  61. Stimson I L, Fisher R (1980) Design and Engineering of Carbon Brakes. Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences 294 (1411): 583–590CrossRefGoogle Scholar
  62. Stodart J, Faraday M (1820) Experiments on the Alloys of Steel, made with a View to its Improvement. Philosophical Magazine 56 (257): 26–35Google Scholar
  63. Tewari R et al (2000) Precipitation in 18 wt% Ni Maraging Steel of Grade 350. Acta Materialia 48 (5): 1187–1200CrossRefGoogle Scholar
  64. The AISE Steel Foundation (1998) The Making Shaping and Treating of Steel, 10th edn. The AISE Foundation, PittsburgGoogle Scholar
  65. Totten G E (2007) Steel Heat Treatment – Metallurgy and Technologies, 2nd edn. CRC PressGoogle Scholar
  66. Toulouevski Y, Zinurov I (2013) Innovation in Electric Arc Furnaces, 2nd edn. SpringerGoogle Scholar
  67. Turkdogan E T (2010) Fundamentals of Steelmaking. Maney PublishingGoogle Scholar
  68. Tylecote R F (2002) A History of Metallurgy, 2nd edn. Maney PublishingGoogle Scholar
  69. Verhoeven J D (2007) Steel Metallurgy for the Non-Metallurgist. ASM InternationalGoogle Scholar
  70. Viswanathan U et al (1988) Effects of Aging on the Microstructure of 17-4 PH Stainless Steel. Materials Science and Engineering A 104: 181–189CrossRefGoogle Scholar
  71. Windhorst T, Blount G (1997) Carbon-Carbon Composites: a Summary of Recent Developments and Applications. Materials & Design 18 (1): 11–15CrossRefGoogle Scholar
  72. Würzinger P, Rabitsch R, Meyer W (2004) Production of Maraging Steel Grades and the Influence of Specified and Nonspecified Elements for Special Applications. Journal of Materials Science 39 (24): 7295–7302CrossRefGoogle Scholar
  73. Xu X et al (2002) Tree-ring Formation during Vacuum Arc Remelting of INCONEL 718: Part I. Experimental Investigation. Metallurgical and Materials Transactions A 33 (6): 1795–1804CrossRefGoogle Scholar
  74. Yang S et al (2015) Phase transformation and its effect on mechanical properties of C300 weld metal after aging treatment at different temperatures. Journal of Iron and Steel Research (International) 22(6): 527–533.CrossRefGoogle Scholar
  75. Yeli G, et al (2017) Sequential Nucleation of Phases in a 17-4PH Steel: Microstructural Characterization and Mechanical Properties. Acta Materialia 125: 38–49CrossRefGoogle Scholar
  76. Young D (2015) High temperature oxidation and corrosion of metals. Elsevier, OxfordGoogle Scholar
  77. Young T M (2018) Performance of the Jet Transport Airplane. John Wiley & Sons LtdGoogle Scholar

Further Reading

  1. ASM International (1994) ASM Specialty Handbook – Stainless Steels. ASM International, Materials Park, OhioGoogle Scholar
  2. Faivre D, Frankel R (2016) Iron Oxides: from Nature to Applications. Wiley-VHC, WeinheimCrossRefGoogle Scholar
  3. Gale W F, Totemeyer T C (2004) Smithells Metals Reference Book 8th ed. Butterwoth-HeinemannGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • Stefano Gialanella
    • 1
  • Alessio Malandruccolo
    • 2
  1. 1.Industrial Engineering DepartmentUniversity of TrentoTrentoItaly
  2. 2.Metallurgy Industrial ConsultantBolzanoItaly

Personalised recommendations