Abstract
Building Information Modelling has been recognized as an innovation in the buildings’ life cycle around the world. This paper shows the contribution of this technology to the civil construction process. The methodology used was bibliographical research. The results show that BIM is improving the process and enabling teams to collaborate effectively.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Abanda, F.H., Kamsu-foguem, B.E., Tah, J.H.M.: BIM—new rules of measurement ontology for construction cost estimation. Eng. Sci. Technol., Int. J. 20(2), 443–459 (2017)
Akinade, O., Oyedele, L.O., Ajayi, S.O., et al.: Designing out construction waste using BIM technology: stakeholders’ expectations for industry deployment. J. Clean. Prod. 180, 375–385 (2018)
Akinade, O., Oyedele, L.O., Omoteso, L., et al.: BIM-based deconstruction tool: towards essential functionalities. Int. J. Sustain. Built Environ. 6(1), 260–271 (2017)
Akponeware, A.O.E., Adamu, Z.A.: Clash detection or clash avoidance? An investigation into coordination problems in 3D BIM. Buildings 7(3) (2017)
Cavka, H.B., Staub-french, S.E., Pottinger, R.: Evaluating the alignment of organizational and project contexts for BIM adoption: a case study of a large owner organization. Buildings 5(4), 1265–1300 (2015)
Chegu Badrinath, A., Chang, Y.T.E., Hsieh, S.H.: A review of tertiary BIM education for advanced engineering communication with visualization. Vis. Eng. 4(1) (2016)
Eastman, C., Sacks, R. Liston, K., et al.: Manual de BIM: Um guia de modelagem a informação da construção para arquitetos, engenheiros, gerentes, construtores e incorporadores. Porto Alegre: Bookman (2014). 483 ISBN 978-85-8260-117-4
Fadeyi, M.O.: The role of building information modeling (BIM) in delivering the sustainable building value. Int. J. Sustain. Built Environ. 6(2), 711–722 (2017)
Ferenhof, H.A., Fernandes, R.F.: Desmistificando a revisão de literatura como base para redação científica: método SFF. Revista ACB, [S.l.], v. 21, n. 3, p. 550–563, dez. 2016. ISSN 1414-0594. Available at: https://revista.acbsc.org.br/racb/article/view/1194. Accessed 09 set. 2018
Fernandes, C.A.P.: Interoperacionalidade em sistemas de informação. 130p. (Mestrado). Universidade do Minho, Azurém, Portugal (2014)
Ferenhof, H.A.: Notas de aula do curso de revisão sistemática de literatura. UFSC (2018)
Ge, X.J., Livesey, P., Wang, J., et al.: Deconstruction waste management through 3D reconstruction and BIM: a case study. Vis. Eng. 5(1) (2017)
Hernandez, J.L., Lerones, P.M., Bonsma, P., et al.: An IFC interoperability framework for self-inspection process in buildings. Buildings, 8(2) (2018)
Hong, J., Kim, D., Lee, M. et al.: An advanced process of condensation performance evaluation by BIM application. Adv. Mater. Sci. Eng. 2017 (2017)
Jordan-palomar, I., Tzortzopoulos, P., García-Valldecabres, J., et al.: Protocol to manage heritage-building interventions using heritage building information modelling (HBIM). Sustain. (Switz.) 10(4) (2018)
Kassem, M.E., Amorin, S.R.L.: BIM—Building Information Modeling no Brasil e na União Europeia. Brasília (2015)
Liao, L., Teo, E.A.L., Low, S.P.: A project management framework for enhanced productivity performance using building information modelling. Constr. Econ. Build. 17(3), 1–26 (2017)
Mattana, L., Librelotto, L.I.: Contribuição do BIM para a sustentabilidade econômica de edificações. Mix Sustentável V3(2), 2017 (2017)
Sakamori, M.M.: Modelagem 5D (BIM) - Processo de orçamentação com estudo sobre controle de custos e valor agregado para empreendimentos de construção civil. 2015. (Dissertação de mestrado). Programa de Pós-Graduação em engenharia de construção civil – PPGECC, Universidade Federal do Paraná, Curitiba (2015)
Tolmer, C.E., Castaing, C., Diab, Y., et al.: Adapting LOD definition to meet BIM uses requirements and data modeling for linear infrastructures projects: using system and requirement engineering. Vis. Eng. 5(1), 2017. Available at https://doi.org/10.1186/s40327-017-0059-9. Accessed Sept 22, 2018
Wang, Y., Wang, X., Wang, J., Yung, P., Jun, G.: Engagement of facilities management in design stage through BIM: framework and a case study. Adv. Civil Eng. 2013, 8 (2013). article ID 189105, Available at https://doi.org/10.1155/2013/189105. Accessed Sept 22, 2018
Acknowledgements
This work was jointly funded by the Federal University of Santa Catarina.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Mattana, L., Souza, J.C., de Faria, M.L.T. (2020). The Study of Innovation Process in Civil Construction Through BIM Technology. In: Leiras, A., González-Calderón, C., de Brito Junior, I., Villa, S., Yoshizaki, H. (eds) Operations Management for Social Good. POMS 2018. Springer Proceedings in Business and Economics. Springer, Cham. https://doi.org/10.1007/978-3-030-23816-2_76
Download citation
DOI: https://doi.org/10.1007/978-3-030-23816-2_76
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-23815-5
Online ISBN: 978-3-030-23816-2
eBook Packages: Economics and FinanceEconomics and Finance (R0)