Advertisement

Contact Zone Effect Analysis onto the Deforming Rollers Geometrics During the Surface Plastic Deformation Treatment

  • Y. N. Oteniy
  • O. V. MartynenkoEmail author
  • N. I. Nikiforov
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The research studies the problem-solving methods of the parts geometrics in the contact zone depending on the deforming rollers geometrics. The direct and indirect methods are used to solve this problem. Different forms of contact zones were studied. Research results showed that the contact zone form and size do not provide the same working environment. Maximum depth of the roller feeding-in into the part surface and the contact zone volume can be used as such data. This problem solution determines the surface quality influence factors during the parts’ treatment with the surface plastic deformation. The direct method is commonly used to solve the problems about the different deforming rollers geometrics influence and the treatment factors influence on tension in the contact zone and the surface layer quality during the surface plastic deformation. The method consists of determining the contact zone geometric parameters depending on the specific parameters of the deforming roller used in the deformation process. During the indirect method, the arbitrary shape and the size of the contact are defined first, after that, the contact zone correspondence to the type and the size of the roller is determined.

Keywords

Contact zone Deforming roller Geometrics 

References

  1. 1.
    Martynenko OV (2017) Determination of plastic deformation depth distribution during the plastic surface deformation. Mod Technol Achievements 4:20–22Google Scholar
  2. 2.
    Martynenko OV (2017) Physical-mechanical effects influence in the contact zone onto the hardening characteristics and detail surface quality. In: PKK polytechnic, innovative technologies in study, Volgograd, p 304Google Scholar
  3. 3.
    Martynenko OV (2014) Management automation constructive-technological parameters of treatment by surface plastic deformation by rollers. Achievements Mod Nat Sci 11:41–43Google Scholar
  4. 4.
    Nikiforov NI, Martynenko OV, Moroz VU (2017) Determination of plastic deformation depth expansion when surface is plastically deformed by rollers. Achievements Mod Nat Sci 4:48–50Google Scholar
  5. 5.
    Martynenko OV (2013) The study of stress state influence in the area of contact on the points kinematics of deformed surface when the surface is plastically deformed by rollers. Achievements Mod Nat Sci 12:63–65Google Scholar
  6. 6.
    Otenyi YN (2006) Technological support of the quality of machine parts when processing surface plastic deformation rollers. In: Reference book. Engineering Magazine, 23pGoogle Scholar
  7. 7.
    Suslov AG (2013) Mechanical engineering. Kno Rus, Moscow, 336pGoogle Scholar
  8. 8.
    Pleshakov VV (2006) Surface plastic deformation. Stankin, Moscow, p 192Google Scholar
  9. 9.
    Zaiydes SA (2015) Encyclopedia of surface plastic deformation. Irkutsk Publishing House, Irkutsk National Research Technological University, 395pGoogle Scholar
  10. 10.
    Markin AA (2013) Thermomechanical elastoplastic deformation. Physics and Mathematics Faculty, Moscow, p 319Google Scholar
  11. 11.
    Ivanov NB (2013) Theory of the rigid body deformation. KNRTU, Kazan, p 124Google Scholar
  12. 12.
    Oteniy YN (2005) Machine components technological quality assurance by surface plastic deformation: study. Volgograd Technological Institute, Volgograd, p 224Google Scholar
  13. 13.
    Masterov IA, Berkovsky VS (1989) The theory of plastic deformation and metal treatment under pressure. Metallurgy, Moscow, p 324Google Scholar
  14. 14.
    Odintsov P (1987) Plastic deformation surface strengthening and treatment. In: Reference book. Machine construction, Moscow, 329pGoogle Scholar
  15. 15.
    Papshev DD (1978) Strengthening and conditioning using surface plastic deformation. Machine Construction, Moscow, p 152Google Scholar
  16. 16.
    Shneider UG (1989) The technology of metal finish treatment by pressure. Polytechnic, SPb, 411pGoogle Scholar
  17. 17.
    Joson W (1978) Engineering plasticity. London Yar Nostrand Reinhold Company, 577pGoogle Scholar
  18. 18.
    Martynenko OV The study of influence of deforming rollers geometric parameters on the quality of surface layer when treating with plastic deformationGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • Y. N. Oteniy
    • 1
  • O. V. Martynenko
    • 1
    Email author
  • N. I. Nikiforov
    • 1
  1. 1.Kamyshin Technological Institute (branch) of Volgograd State Technical UniversityVolgograd reg, KamyshinRussia

Personalised recommendations