Advertisement

Determination of Flanging Parameters and Length of Screwing in Producing Holes by the Method of Thermal Drilling in Thin-Sheet Metal

  • P. V. ShalamovEmail author
  • I. A. Kulygina
  • A. N. Yasnitsky
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

In mechanical engineering, products from sheet blanks are widely used, which provide for threaded fastening of various components to them. The formation of holes for thread in such blanks has a number of difficulties. The main problem is to ensure the strength of threaded joints. The parameters that determine the strength of a threaded joint are the diameter and pitch of the thread, the ratio of the mechanical characteristics of the material of the bolt and nut, and the length of screwing. In case of insufficient screwing length, the threaded joint is destroyed. To increase the length of screwing in thin-sheet blanks, sheet bending, welding of sleeves, preliminary punching of holes and other methods are used. However, the existing methods do not have sufficient adaptability. With regard to thin-sheet blanks, the most rational use of the method of forming holes is the method of thermal drilling. This eliminates the use of additional elements to increase the length of screwing. This article presents experimental and theoretical studies of the relationship between the shape and geometrical dimensions of flanging, made by thermal drilling in thin-sheet metal, with a screwing length. The influence of the shape and geometrical dimensions of flanging a hole made by thermal drilling in thin-sheet metal on the length of screwing and the strength of a threaded joint for cutting is considered.

Keywords

Thermal drilling Hole flanging Screwing length Thin-sheet blanks Threaded joint 

References

  1. 1.
    FormDrill (2017) Information on http://formdrill.com/english/formdrill.htm
  2. 2.
    Centredrill (2017) Information on http://www.centerdrill.de
  3. 3.
    Khomenko V (2005) Forming of attachment points in thin-walled parts using the method of plastic drilling. Thesis, Altai State Technical University of I.I. PolzunovGoogle Scholar
  4. 4.
    Zolotov O (2007) Improvement of processing technology for thin-walled parts using plastic drilling. Thesis, Altai State Technical University. I.I. PolzunovaGoogle Scholar
  5. 5.
    Shalamov P (2012) Formation of holes for threads by a rotating punch in thin-sheet billets. Thesis, South Ural State UniversityGoogle Scholar
  6. 6.
    Shalamov P (2011) Formation of holes by a rotating punch in a thin-sheet billet. Bulletin of SUSU 18:81–84Google Scholar
  7. 7.
    Usachev V (2012) Technology of thermoplastic drilling. Actual Probl Mech Eng 10:181–184Google Scholar
  8. 8.
    Usachev V (2011) Technology and tool for thermoplastic formation of holes. In: Proceedings of the Samara scientific center of the Russian academy of sciences, vol 13, pp 429–432Google Scholar
  9. 9.
    Shalamov P, Kazantseva Ju (2017) Thermal drilling with force-feed tool. Procedia Eng 206:985–990CrossRefGoogle Scholar
  10. 10.
    Utenkov V, Bykov P (2012) Possibilities of using a dynamometer Kistler for testing metal-cutting machines. Eng Bull 10:1–23CrossRefGoogle Scholar
  11. 11.
    Nikonov N (2015) Thermocouples. Types, characteristics, designs. MoscowGoogle Scholar
  12. 12.
    Miller S, Blau P, Shih A (2007) Tool wear in friction drilling. Int J Mach Tools Manuf 47:1636–1645CrossRefGoogle Scholar
  13. 13.
    Shalamov P, Kulygina I, Yaroslavova E (2016) ANSYS software based on the study thermal drilling process. Procedia Eng 150:746–752CrossRefGoogle Scholar
  14. 14.
    Taureza M, Song H, Castan S (2014) The effect of workpiece material on friction in Microforming and lubrication efficiency. J Mater Process Technol 214:998–1007CrossRefGoogle Scholar
  15. 15.
    Guzeev V, Shalamov P, Shultc E (2006) Calculation geometry of heading made by technical welding in thin sheet metal. Progress Technol Mech Eng 63:175–178Google Scholar
  16. 16.
    Ilyushin A Plastic. Elastic-plastic deformations. MoscowGoogle Scholar
  17. 17.
    Serebrenitsky P (2004) General technical reference. St. PetersburgGoogle Scholar
  18. 18.
    Bronstein I (2010) Handbook of mathematics for engineers and students of high schools. St. PetersburgGoogle Scholar
  19. 19.
    Anurev V (2001) Reference book of a designer-mechanical engineer, vol. 1. Mechanical Engineering, Moscow, 920 pGoogle Scholar
  20. 20.
    Shalamov P, Cherepkov I, Kulygin V (2018) Strenght of a threaded joint on cut in holes with flanges formed by a rotating punch in thin-sheet workpieces. Solid State Phenom 284:441–446CrossRefGoogle Scholar
  21. 21.
    Tyunyaev A (2013) Machine parts. St. PetersburgGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • P. V. Shalamov
    • 1
    Email author
  • I. A. Kulygina
    • 1
  • A. N. Yasnitsky
    • 1
  1. 1.South Ural State UniversityChelyabinskRussia

Personalised recommendations