Advertisement

Preparing Automated of Software Complex for Technological Processes with Imposition of Electric Field

  • O. V. Skrygin
  • V. P. SmolentsevEmail author
  • E. A. Saltanaeva
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The chapter examines the processes of creating control systems for electrical processing methods that can be based on the principle of contact-free movement of the tool electrode’s working surface in relation to the processed one. The possibilities of tool wear and poorly formalized change in the inter-electrode gap are taken into consideration. For this purpose, it is proposed to apply the statistical methods of process investigation, using the results as boundary conditions in modelling shifts along the controlling coordinate, within the limits laid in CNC machine tools for electro-erosion, electrochemical and combined processing of metal materials, including the most common equipment with an unprofiled wire electrode. The paper presents the examples of using the developed software products for electro-erosion and combined processing of typical complex profiled parts, specific for small-scale flexible manufacturing in modern science-based machine construction. The area of perspective use in various branches of mechanical engineering of the technique of design of control programs for the combined methods of processing with imposing of an electric field offered in the article is opened.

Keywords

Combined processing Electrode tool Non-profiled electrode Control systems 

References

  1. 1.
    Brailov IG, Chasovskikh AI (1998) The modelling of shape formation by CNC machine tools. The Publishing House of VSTU, VoronezhGoogle Scholar
  2. 2.
    Razi AA (1984) Path converters. Mashinostroenie, LeningradGoogle Scholar
  3. 3.
    Ivakhnenko AG, Kutz VV (2013) The pre-project studies of metal-cutting systems: monograph. South-West State University, КurskGoogle Scholar
  4. 4.
    Safonov SV (2015) The criterial system of planning and using the technological processes for enhancing the performance characteristics of the surface layer. The Bulletin of Voronezh State Technical University 11(3):4–10Google Scholar
  5. 5.
    Smolentsev EV (2005) The planning of electrical and combined processing methods. Mashinostroenie, MoscowGoogle Scholar
  6. 6.
    Kuzovkin AV (2001) The combined processing by an unbound electrode. Publishing House of Voronezh State University, VoronezhGoogle Scholar
  7. 7.
    Zakovorotny VL, Flek MB (1997) The definition of invariant diversity of trajectories of shape-forming movements. The designing of technological machines: the collection of scientific works, MSTU “Stankin”, Moscow, issue 4Google Scholar
  8. 8.
    Flek MB (1998) The account of evolutionary transformations in shape-forming movement control. Designing technological machines: the collection of scientific works, MSTU “Stankin”, Moscow, issue 9Google Scholar
  9. 9.
    Smolentsev VP, Goncharov EV (2012) Enhancing the accuracy of hydroabrasive processing and quality of the surface layer in the separation zone of viscious materials. Strengthening technologies and coatings 4:45–48Google Scholar
  10. 10.
    Suslov AG (2012) High technologies in mechanical engineering. Mashinostroenie, MoscowGoogle Scholar
  11. 11.
    Suslov AG (2000) Engineering. Engineering, T- Sh-3, MoscowGoogle Scholar
  12. 12.
    Vasiliev AS, Kutina AA (2018), Handbook of mechanical engineer, vol 2. Innovative mechanical engineering, MoscowGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • O. V. Skrygin
    • 1
  • V. P. Smolentsev
    • 1
    Email author
  • E. A. Saltanaeva
    • 1
  1. 1.Voronezh State Technical UniversityVoronezhRussia

Personalised recommendations