Advertisement

Peculiarities of Application of Th20 Hard Alloy for Turning Processing of Various Steels with Advanced Plastic Deformation

  • P. A. NorchenkoEmail author
  • V. A. Solodkov
  • S. I. Kormilitsyn
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The problems of management of the mechanical treatment modes and provision of the set indicators of the processed surface quality are being discussed. The concept of the technological operations of machine treatment in the direction of an operational assessment of the cutting tool characteristics, the processed material and the detailed surface layer for the purpose of the efficiency increase is justified. The paper discusses the physical basis for using the TN20 hard alloy for machining steels of various grade (stainless and carbon steels) from the point of view of prospects for improving the efficiency of the cutting process with advanced plastic deformation, as well as demonstrates ways for optimizing cutting conditions. The changing of the development and management concept of the technological operations of machine treatment in the direction of an operational assessment of the cutting tool characteristics, the processed material and the detailed surface layer for the purpose of the efficiency increase is expedient.

Keywords

Hard alloy Advanced deformation Thermal emf Cutting conditions 

References

  1. 1.
    Kosilova AG, Meshcheryakov RK (1985) Reference book for a technologist and mechanical engineer. In: Kosilova AG, Meshcheryakov RK (eds) Mechanical Engineering, MoscowGoogle Scholar
  2. 2.
    Talantov NV (1992) Physical fundamentals of the process of cutting, wear, and destruction of the tool. Mechanical Engineering, MoscowGoogle Scholar
  3. 3.
    Chirchiq Branch of VTIITS (1982) Recommendations for the application of Tungsten-free metal and ceramic carbide alloy “Monitikar.” (1982)/Chirchiq-19, Tashkent regionGoogle Scholar
  4. 4.
    Suslov AG (1987) Technological support of a condition parameters of the details surface layer. Mechanical Engineering, MoscowGoogle Scholar
  5. 5.
    Yaroslavtsev VM (2015) The efficiency of methods of the advancing deformation hardening of material of the cut-off layer by cutting processing. Bulletin of Bauman Moscow State Technical University. Series: Mechanical EngineeringGoogle Scholar
  6. 6.
    Norchenko PA, Popov AI (2014) On the roughness of the surface layer when processing steel 20 with advanced plastic deformation with TH20 cutting plates. Proceedings of the Volgograd State Technical UniversityGoogle Scholar
  7. 7.
    Norchenko PA, Popov AI (2014) Prospects for the application of the TN20 hard alloy for finishing work of low-carbon structural steels with the help of advanced plastic deformation. Herald of the Volgograd State Technical UniversityGoogle Scholar
  8. 8.
    Krainev DV, Norchenko PA, Ingemansson AR (2008) Progressive method of cutting stainless and Heaproof steels and alloys. Eur J Nat HistGoogle Scholar
  9. 9.
    Podurayev VN (1974) Cutting of Hard-to-Machine Materials. Higher School, MoscowGoogle Scholar
  10. 10.
    Podurayev VN, Yaroslavtsev VM, Yaroslavtseva NA (1971) Method of cutting using advanced plastic deformation. Herald of EngineeringGoogle Scholar
  11. 11.
    Sergeyev AS, Zaytseva NG, Plotnikov AL (2012) Mathematical model of a surface roughness formation when steel turning on the basis of thermoEMF operational signal. Processing of metalsGoogle Scholar
  12. 12.
    Plotnikov AL, Krylov EG, Frolov EM (2010) Diagnostics of the state of a multicutter hard alloy tool on the basis of thermoelectric phenomena in the cutting zone. Russian Engineering ResearchGoogle Scholar
  13. 13.
    Tchigirinsky JL (2010) Mathematical methods of the control of the machining processes: monography. Volgograd State Technical University, Volgograd, RussiaGoogle Scholar
  14. 14.
    Soldatov AA (2012). Undestructive control of plastic deformation by method of measurement of differential thermoEMF. DefectoscopyGoogle Scholar
  15. 15.
    Firsov AM, Vdovin AV, Perepelkin PV, Timakhovich IV (2012) Interrelation of parameters of acoustic emission with the modes of cutting and roughness of a surface when turning. Processing of metalsGoogle Scholar
  16. 16.
    Plotnikov AL, Taube AO (2003) Management of cutting conditions on CNC Lathe machines. PKK Politekhnik, VolgogradGoogle Scholar
  17. 17.
    Miroshin IV (2010) Technique of acoustic-emission researches of the inherited parameters of quality of a blanket in the conditions of cutting and superficial plastic deformation. Bulletin of the Kuzbass state technical universityGoogle Scholar
  18. 18.
    Poduraev VN (1974) Cutting of hard-to-process materials. High school, MoscowGoogle Scholar
  19. 19.
    Polyanchikov YuN, Kraynev DV, Norchenko PA, Ingemansson AR (2012) Improvement of semi-fair and fair turning corrosion-proof and heat resisting steels by use of the advancing plastic deformation: monograph. ONIKS, TolyattiGoogle Scholar
  20. 20.
    Ingemansson AR, Zaytseva NG, Kraynev DV, Bondarev AA (2012) Improvement of quality of processing and mathematical model of formation of a roughness of a surface when turning with advancing plastic deformation. USATU BulletinGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • P. A. Norchenko
    • 1
    Email author
  • V. A. Solodkov
    • 1
  • S. I. Kormilitsyn
    • 1
  1. 1.Volgograd State Technical UniversityVolgogradRussia

Personalised recommendations