Advertisement

Advanced Internal Fin Geometries and Finned Annuli

  • Sujoy Kumar Saha
  • Hrishiraj Ranjan
  • Madhu Sruthi Emani
  • Anand Kumar Bharti
Chapter
Part of the SpringerBriefs in Applied Sciences and Technology book series (BRIEFSAPPLSCIENCES)

Abstract

Advanced internal fin geometries and finned annuli have been discussed in detail in this chapter. First, the relevant technology has been introduced. Following this, laminar flow and turbulent flow have been discussed. Microfins and their applications have been discussed.

Keywords

Advanced internal fin geometries Laminar flow Turbulent flow Annuli Microfins 

References

  1. Abe K, Kondoh T, Nagano Y (1994) A new turbulence model for predicting fluid flow and heat transfer in separating and reattaching flows—I. Flow field calculations. Int J Heat Mass Transf 37(1):139–151zbMATHCrossRefGoogle Scholar
  2. Agarwal A, Sarviya RM (2016) An experimental investigation of shell and tube latent heat storage for solar dryer using paraffin wax as heat storage material. Eng Sci Technol Int J 19(1):619–631CrossRefGoogle Scholar
  3. Akhavan-Behabadi MA, Kumar R, Mohseni SG (2007) Condensation heat transfer of R134a inside a microfin tube with different tube inclinations. Int J Heat Mass Transf 50:4864–4871CrossRefGoogle Scholar
  4. Al-Abidi AA, Mat S, Sopian K, Sulaiman MY, Mohammad A (2013) Internal and external fin heat transfer enhancement technique for latent heat thermal energy storage in triplex tube heat exchangers. Appl Therm Eng 53:147–156CrossRefGoogle Scholar
  5. Al-Fahed S, Chamra LM, Chakroun W (1999) Pressure drop and heat transfer comparison for both microfin tubes and twisted tape inserts in laminar flow. Exp Thermal Fluid Sci 18:323–333CrossRefGoogle Scholar
  6. Ayub ZH, Chyu MC, Ayub AH (2006) Case study: limited charge shell and tube ammonia spray evaporator with enhanced tubes. Appl Therm Eng 26(11–12):1334–1338CrossRefGoogle Scholar
  7. Beattie DH, Whalley PB (1982) Simple two-phase frictional pressure drop calculation method. Int J Multiphase Flow 8:83–87CrossRefGoogle Scholar
  8. Bhatia RS, Webb RL (2001) Numerical study of turbulent flow and heat transfer in microfin tubes—part 2, parametric study. J Enhanc Heat Transf 8:305–314CrossRefGoogle Scholar
  9. Braga CVM, Saboya FEM (1999) Turbulent heat transfer, pressure drop and fin efficiency in annular regions with continuous longitudinal rectangular fins. Exp Therm Fluid Sci 20:55–65CrossRefGoogle Scholar
  10. Briggs DE, Young EH (1963) Convection heat transfer and pressure drop of air flowing across triangular pitch banks of finned tubes. Chem Eng Prog Symp Ser 59(41):1–10Google Scholar
  11. Brognaux LB, Webb RL, Chamra LM (1997) Single phase heat transfer in micro-fin tubes. Int J Heat Mass Transf 40(18):4345–4357CrossRefGoogle Scholar
  12. Cavallini A, Del Col D, Doretti L, Longo GA, Rossetto L (1999) A new computational procedure for heat transfer and pressure drop during refrigerant condensation inside enhanced tubes. J Enhanc Heat Transf 6:441–456CrossRefGoogle Scholar
  13. Cavallini A, Del Col D, Mancin S, Rossetto L (2009) Condensation of pure and near-azeotropic refrigerants in microfin tubes: a new computational procedure. Int J Refrig 32:162–174CrossRefGoogle Scholar
  14. Chang KC, Hsieh WD, Chen CS (1995) A modified low-Reynolds-number turbulence model applicable to recirculating flow in pipe expansion. Trans ASME I J Fluids Eng 117(3):417–423CrossRefGoogle Scholar
  15. Chieng CC, Launder BE (1980) On the calculation of turbulent heat transport downstream from an abrupt pipe expansion. Numer Heat Transf 3(2):189–207CrossRefGoogle Scholar
  16. Chiou CB, Wang CC, Lu DC (1995) Single-phase heat transfer and pressure drop characteristics of microfin tubes. ASHRAE Trans 101(2):1041–1048Google Scholar
  17. Choi JY, Kedzierski MA, Domanski PA (2001) Generalized pressure drop correlation for evaporation and condensation in smooth and micro-fin tubes. In: Proceedings of IIF-IIR Commission B1, October 3–5, Paderborn, Germany, B4, pp 9–16Google Scholar
  18. Chung BTF, Jia S (1995) A turbulent near-wall model on convective heat transfer from an abrupt expansion tube. Heat Mass Transf 31(1–2):33CrossRefGoogle Scholar
  19. Copetti JB, Macagnan MH, De Souza D, Oliveski De Cesaro R (2004) Experiments with microfin in single phase. Int J Refrig 27:876–883CrossRefGoogle Scholar
  20. DeLorenzo B, Anderson ED (1945) Heat transfer and pressure drop of liquids in double pipe fintube exchangers. ASME Trans 67:697–702Google Scholar
  21. Eckels SJ, Pate MB (1991) An experimental comparison of evaporation and condensation heat transfer coefficients for HFC-134a and CFC-12. Int J Refrig 14:70–77CrossRefGoogle Scholar
  22. Edwards RJ, Jambunathan K, Button BL (1988) Experimental investigation of turbulent heat transfer in simultaneously developing flow in finned annuli. In: Shah RK, Ganic EN, Yang KT (eds) Proceedings of the first world conference on experimental heat transfer, fluid mechanics and thermodynamics. Elsevier Pub, pp 543–550Google Scholar
  23. Esen EB, Obot NT, Rabas TJ (1994) Enhancement: part I. Heat transfer and pressure drop results for air flow through passages with spirally-shaped roughness. J Enhanc Heat Transf 1:145–156CrossRefGoogle Scholar
  24. Friedel L (1979) Improved friction pressure drop correlations for horizontal and vertical two-phase pipe flow, European Two-Phase Flow Group Meeting, paper E2Google Scholar
  25. Fu WL, Wang CC, Chang WR, Chang CT (1995) Effect of anti-corrosion coating on the thermal characteristics of a louvered finned tube heat exchangers under dehumidifying conditions. In: Advances in enhanced heat/mass transfer and energy efficiency ASME, HTD, vol 320/PID, vol 1, pp 75–81Google Scholar
  26. Gronnerud R (1979) Investigation of liquid hold-up, flow-resistance and heat transfer in circulation type evaporators, Part VI: two-phase flow resistance in boiling refrigerants, Bull. de I’Inst. du FroidGoogle Scholar
  27. Gharebaghi M (2007) Numerical investigation of phase change process of PCM in a thermal energy storage system with fins. M.S. Thesis, Eastern Mediterranean University, Gazimagusa, North CyprusGoogle Scholar
  28. Gharebaghi M, Sezai I (2007) Enhancement of heat transfer in latent heat storage modules with internal fins. Numer Heat Transf Part A Appl 53(7):749–765CrossRefGoogle Scholar
  29. Gunter AY, Shaw WA (1942) Heat transfer, pressure drop, and fouling rates of liquids for continuous and noncontinuous longitudinal fins. ASME Trans 64:795–804Google Scholar
  30. Haraguchi H, Koyama S, Esaki J, Fujii T (1993) Condensation heat transfer of refrigerants HCFC134a, HCFC123 and HCFC22 in a horizontal smooth tube and a horizontal microfin tube. In: Proceeding of 30th national symposium of Japan, Yokohama, Japan, pp 343–345, 43, Errata, p 791Google Scholar
  31. Han DH, Lee KJ (2005) Single-phase heat transfer and flow characteristics of micro-fin tubes. Appl Therm Engg 25(11–12):1657–1669CrossRefGoogle Scholar
  32. Higahiiue S, Kuwahara K, Yanachi S, Koyama S (2007) Experimental investigation on heat transfer characteristics of supercritical carbon dioxide inside horizontal micro-fin copper tube during cooling process. In: ASME/JSME 2007 thermal engineering heat transfer summer conference collocated with the ASME 2007 InterPAC conference, American Society of Mechanical Engineers, pp 837–842Google Scholar
  33. Hosseini MJ, Ranjbar AA, Sedighi K, Rahimi M (2012) A combined experimental and computational study on the melting behavior of a medium temperature phase change storage material inside shell and tube heat exchanger. Int Commun Heat Mass Transf 39(9):1416–1424CrossRefGoogle Scholar
  34. Hsieh WD, Chang KC (1996) Calculation of wall heat transfer in pipe expansion turbulent flows. Int J Heat Mass Transf 39(18):3813–3822zbMATHCrossRefGoogle Scholar
  35. Huang XC, Ding GL, Hu HT, Zhu Y, Gao YF, Deng B (2010) Condensation heat transfer characteristics of R410A-oil mixture in 5 mm and 4 mm outside diameter horizontal microfin tubes. Exp Therm Fluid Sci 34:845–856CrossRefGoogle Scholar
  36. Hussein T, Shkarah AJ, Kazi SN, Badarudin A (2013) CFD simulation of heat transfer and turbulent fluid flow over a double forward-facing step. Math Probl Eng 2013:1–10Google Scholar
  37. Hussein T, Ahmadi G, Abdulrazzaq T, Shkarah AJ, Kazi SN, Badarudin A (2015) Thermal performance of nanofluid in ducts with double forward-facing steps. J Taiwan Inst Chem Eng 47:28–42CrossRefGoogle Scholar
  38. Ito M, Kimura H (1979) Boiling heat transfer and pressure drop in internal spiral-grooved tubes. Bull JSME 22(171):1251–1257CrossRefGoogle Scholar
  39. Jensen MK, Vlakancic A (1999) Technical note–experimental investigation of turbulent heat transfer and fluid flow in internally finned tubes. Int J Heat Mass Transf 42:1343–1351CrossRefGoogle Scholar
  40. Ji WT, Zhang DC, He YL, Tao WQ (2012) Prediction of fully developed turbulent heat transfer of internal helically ribbed tubes—an extension of Gnielinski equation. Int J Heat Mass Transf 55(4):1375–1384zbMATHCrossRefGoogle Scholar
  41. Kedzierski MA, Goncalves JM (1999) Horizontal convective condensation of alternative refrigerants within a micro- fin tube. J Enhanc Heat Transf 6(1):161–178CrossRefGoogle Scholar
  42. Kelkar KM, Patankar SV (1990) Numerical prediction of fluid flow and heat transfer in a circular tube with longitudinal fins interrupted in the steamwise direction. J Heat Transf 112:342–348CrossRefGoogle Scholar
  43. Khanpara JC, Bergles AE, Pate MB (1986) Augmentation of R-113 in-tube condensation with micro fin tubes. In: Heat transfer in air conditioning and refrigeration equipment, HTD, vol 65. ASME, New York, pp 21–32Google Scholar
  44. Khanpara JC, Bergles AE, Pate MB (1987) A comparison of in-tube evaporation of refrigerant 113 in electrically heated and fluid heated smooth and inner fin tubes. In: Jensen MK, Carey VP (eds) Advances in enhanced heat transfer, HTD, vol 68, pp 35–45Google Scholar
  45. Khodadadi JM, Zhang Y (2001) Effects of buoyancy-driven convection on melting within spherical containers. Int J Heat Mass Transf 44:1605–1618zbMATHCrossRefGoogle Scholar
  46. Koyama S, Kuwahara K, Fujii T, Inoue N, Hirakuni S (1993) Heat transfer and pressure drop of single phase flow inside internally grooved tubes. Naimen rasen mizotsuki kannai tansoryu no netsudentatsu oyobi atsuryoku sonshitsuGoogle Scholar
  47. Koyama S, Yu J, Momoki S, Fujii T, Honda H (1996) Forced convective flow boiling heat transfer of pure refrigerants inside a horizontal microfin tube. In: Proceedings of the convective flow boiling, an international conference, pp 137–142Google Scholar
  48. Kim DE, Kim MH (2010) Experimental study of the effects of flow acceleration and buoyancy on heat transfer in a supercritical fluid flow in a circular tube. Nucl Eng Des 240(10):3336–3349CrossRefGoogle Scholar
  49. Kim YJ, Jang J, Hrnjak PS, Kim MS (2009) Condensation heat transfer of carbon dioxide inside horizontal smooth and microfin tubes at low temperatures. J Heat Transf 131:1–10Google Scholar
  50. Kwon JT, Park SK, Kim MH (2000) Enhanced effect of a horizontal micro-fin tube for condensation heat transfer with R22 and R410A. J Enhanc Heat Transf 7:97–107CrossRefGoogle Scholar
  51. Kuwahara K, Higashiiu S, Ito D, Koyama S (2012) Experimental study on cooling heat transfer of supercritical carbon dioxide inside horizontal micro-fin tubes. Trans Jpn Soc Refrig Air Condition Eng 24:173–181Google Scholar
  52. Lacroix M, Benmadda M (1997) Numerical simulation of natural convection-dominated melting and solidification from a finned vertical wall. Numer Heat Transf A 31:71–86CrossRefGoogle Scholar
  53. Lam CKG, Bremhorst K (1981) A modified form of the k-ε model for predicting wall turbulence. J Fluids Eng 103(3):456–460CrossRefGoogle Scholar
  54. Launder BE, Sharma BI (1974) Application of the energy-dissipation model of turbulence to the calculation of flow near a spinning disc. Lett Heat Mass Transf 1(2):131–137CrossRefGoogle Scholar
  55. Lee HS, Kim HJ, Yoon J-I, Choi KH, Son CH (2013) The cooling heat transfer characteristics of the supercritical CO2 in micro-fin tube. Heat Mass Transf 49(2):173–184CrossRefGoogle Scholar
  56. Li Y, Liu S (2013) Effects of different thermal conductivity enhancers on the thermal performance of two organic phase-change materials: paraffin wax RT42 and RT25. J Enhanc Heat Transf 20(6):463–473CrossRefGoogle Scholar
  57. Li W, Wu Z (2010a) A general criterion for evaporative heat transfer in micro/mini-channels. Int J Heat Mass Transf 53(1):1967–1976CrossRefGoogle Scholar
  58. Li W, Wu Z (2010b) A general correlation for adiabatic two-phase pressure drop in micro/mini-channels. Int J Heat Mass Transf 53:2732–2739CrossRefGoogle Scholar
  59. Li W, Wu Z (2010c) A general correlation for evaporative heat transfer in micro/mini-channels. Int J Heat Mass Transf 53(1):1778–1787CrossRefGoogle Scholar
  60. Li XW, Meng JA, Li ZX (2007) Experimental study of single-phase pressure drop and heat transfer in a micro-fin tube. Exp Thermal Fluid Sci 32(2):641–648CrossRefGoogle Scholar
  61. Li XW, Meng JA, Li ZX (2008) Enhancement mechanisms for single-phase turbulent heat transfer in micro-fin tubes. J Enhanc Heat Transf 15(3):227–242CrossRefGoogle Scholar
  62. Liu C, Groulx D (2014) Experimental study of the phase change heat transfer inside a horizontal cylindrical latent heat energy storage system. Int J Therm Sci 82:100–110CrossRefGoogle Scholar
  63. Liu XY, Jensen MK (2001) Geometry effects on turbulent flow and heat transfer in internally finned tubes. ASME J Heat Transf 123:1035–1044CrossRefGoogle Scholar
  64. Liu S, Huang Y, Liu G, Wang J, Leung LKH (2017) Improvement of buoyancy and acceleration parameters for forced and mixed convective heat transfer to supercritical fluids flowing in vertical tubes. Int J Heat Mass Transf 106:1144–1156CrossRefGoogle Scholar
  65. Manglik RM, Jog MA (2016) Resolving the energy-water nexus in large thermoelectric power plants: a case for application of enhanced heat transfer and high-performance thermal energy storage. J Enhanc Heat Transf 23(4):263–282CrossRefGoogle Scholar
  66. Mat S, Al-Abidi AA, Sopiana K, Sulaimana MY, Mohammada AT (2013) Enhance heat transfer for PCM melting in triplex tube with internal–external fins. Energy Convers Manage 74:223–236CrossRefGoogle Scholar
  67. Meyer JP, Olivier JA (2011a) Transitional flow inside enhanced tubes for fully developed and developing flow with different types of inlet disturbances: part I—adiabatic pressure drops. Int J Heat Mass Transf 54:1587–1597CrossRefGoogle Scholar
  68. Meyer JP, Olivier JA (2011b) Transitional flow inside enhanced tubes for fully developed and developing flow with different types of inlet disturbances: part II—heat transfer. Int J Heat Mass Transf 54:1598–1607CrossRefGoogle Scholar
  69. Moser KW, Webb RL, Na B (1998) A new equivalent Reynolds number model for condensation in smooth tubes. J Heat Transf 120(2):410–417CrossRefGoogle Scholar
  70. Mukkamala Y, Sundaresan R (2009) Single-phase flow pressure drop and heat transfer measurements in a horizontal microfin tube in the transition regime. J Enhanc Heat Transf 16(2):141–159CrossRefGoogle Scholar
  71. Muller-Steinhagen H, Heck K (1986) A simple friction pressure drop correlation for two-phase flow pipes. Chem Eng Process 20:297–308CrossRefGoogle Scholar
  72. Murray RE, Groulx D (2014) Experimental study of the phase change and energy characteristics inside a cylindrical latent heat energy storage system: part 1 consecutive charging and discharging. Renew Energy 62:571–581CrossRefGoogle Scholar
  73. Myong HK (1990) A new approach to the improvement of k-ε turbulence model for wall-bounded shear flow. JSME Int J Eng 109:156–160Google Scholar
  74. Nagano Y, Hishida M (1987) Improved form of the k-ε model for wall turbulent shear flows. J Fluids Eng 109(2):156–160CrossRefGoogle Scholar
  75. Nagano Y, Tagawa M (1990) An improved k-ε model for boundary layer flows. J Fluids Eng 112(1):33–39CrossRefGoogle Scholar
  76. Narayanamurthy R (1999) Single phase turbulent flow in microfin and helically ribbed tubes. M.S Thesis, The Pennsylvania State UniversityGoogle Scholar
  77. Nuntaphan A, Kiatsiriroat T (2003) Heat transfer characteristic of cross flow heat exchanger using crimped spiral fin a case study of staggered arrangement. In: The 17th conference of mechanical engineering network of Thailand, Prachinburi ThailandGoogle Scholar
  78. Nuntaphan A, Kiatsiriroat T, Wang CC (2005) Heat transfer and friction characteristics of crimped spiral finned heat exchangers with dehumidification. Appl Therm Eng 25(2–3):327–340CrossRefGoogle Scholar
  79. Ogoh W, Groulx D (2012) Effects of the number and distribution of fins on the storage characteristics of a cylindrical latent heat energy storage system: a numerical study. Heat Mass Transf 48(10):1825–1835CrossRefGoogle Scholar
  80. Olivier JA, Liebenberg L, Thome JR, Meyer JP (2007) Heat transfer, pressure drop, and flow pattern recognition during condensation inside smooth, helical micro-fin, and herringbone tubes. Int J Refrig 30:609–623CrossRefGoogle Scholar
  81. Ooi TH, Webb DR, Heggs PJ (2004) A dataset of steam condensation over a double enhanced tube bundle under vacuum. Appl Therm Eng 24(8–9):1381–1393CrossRefGoogle Scholar
  82. Park KJ, Jung D (2008) Optimum fin density of low fin tubes for the condensers of building chillers with HCFC123. Energy Convers Manag 49(8):2090–2094CrossRefGoogle Scholar
  83. Rabas TJ, Eckels PW, Sabatino RA (1981) The effect of fin density on the heat transfer and pressure drop performance of low-finned tube banks. Chem Eng Commun 10(1–3):127–147CrossRefGoogle Scholar
  84. Raj R, Lakshman NS, Mukkamala Y (2015) Single phase flow heat transfer and pressure drop measurements in doubly enhanced tubes. Int J Therm Sci 88:215–227CrossRefGoogle Scholar
  85. Regin AF, Solanki SC, Saini JS (2008) Heat transfer characteristics of thermal energy storage system using PCM capsules: a review. Renew Sustain Energy Rev 12(9):2438–2458CrossRefGoogle Scholar
  86. Robinson KK, Briggs DE (1966) Pressure drop of air flowing across triangular pitch banks of finned tubes. Chem Eng Prog Symp Ser 62(64):177–184Google Scholar
  87. Rozenfeld T, Kozak Y, Hayat R, Ziskind G (2015) Close-contact melting in a horizontal cylindrical enclosure with longitudinal plate fins: demonstration, modeling and application to thermal storage. Int J Heat Mass Transf 86:465–477CrossRefGoogle Scholar
  88. Saman W, Bruno F, Halawa E (2005) Thermal performance of PCM thermal storage unit for a roof integrated solar heating system. Sol Energy 78:341–349CrossRefGoogle Scholar
  89. Safaei MR, Togun H, Vafai K, Kazi SN, Badarudin A (2014) Investigation of heat transfer enhancement in a forward-facing contracting channel using FMWCNT nanofluids. Numer Heat Transf Part A Appl 66(12):1321–1340CrossRefGoogle Scholar
  90. Sapali SN, Patil PA (2010) Heat transfer during condensation of HFC-134a and R-404A inside of a horizontal smooth and micro-fin tube. Exp Therm Fluid Sci 34:1133–1141CrossRefGoogle Scholar
  91. Schlager LM, Pate MB, Bergles AE (1990) Evaporation and condensation heat transfer and pressure drop in horizontal 12.7-mm microfin tubes with refrigerant 22. J Heat Transf 112:1041–1047CrossRefGoogle Scholar
  92. Sciacovelli A, Gagliardi F, Verda V (2014) Maximization of performance of a PCM latent heat storage system with innovative fins. Appl Energy 137:707–715CrossRefGoogle Scholar
  93. Seeniraj RV, Velraj R, Narasimhan NL (2002) Thermal analysis of a finned-tube LHTS module for a solar dynamic power system. Heat Mass Transf 38(4–5):409–417CrossRefGoogle Scholar
  94. Shah MM (1979) A general correlation for heat transfer during film condensation inside pipes. Int J Heat Mass Transf 22:547–556CrossRefGoogle Scholar
  95. Sharifi N, Bergman TL, Faghri A (2011) Enhancement of PCM melting in enclosures with horizontally-finned internal surfaces. Int J Heat Mass Transf 54:4182–4192zbMATHCrossRefGoogle Scholar
  96. Shedd TA, Newell TA (2003) Visualization of two-phase flow through microgrooved tubes for understanding enhanced heat transfer. Int J Heat Mass Transf 46(22):4169–4177CrossRefGoogle Scholar
  97. Shedd TA, Newell TA, Lee PK (2003) The effects of the number and angle of microgrooves on the liquid film in horizontal annular two-phase flow. Int J Heat Mass Transf 46(22):4179–4189CrossRefGoogle Scholar
  98. Taborek J (1997) Double-pipe and multitube heat exchangers with plain and longitudinal finned tubes. Heat Transf Eng 18(2):34–45CrossRefGoogle Scholar
  99. Tam LM, Ghajar AJ (1997) Effect of inlet geometry and heating on the fully developed friction factor in the transition region of a horizontal tube. Exp Therm Fluid Sci 15(1):52–64CrossRefGoogle Scholar
  100. Tam LM, Ghajar AJ (2006) Transitional heat transfer in plain horizontal tubes. Heat Transf Eng 27(5):23–38CrossRefGoogle Scholar
  101. Tam HK, Tam LM, Ghajar AJ, Sun C, Leung HY (2011) Experimental investigation of the single-phase friction factor and heat transfer inside the horizontal internally micro-fin tubes in the transition region. In: Proceedings of ASME-JSME-KSME joint fluids engineering conference, Hamamatsu, Japan, 24–29 July 2011Google Scholar
  102. Tam HK, Tam LM, Ghajar AJ, Tam SC, Zhang T (2012) Experimental investigation of heat transfer, friction factor, and optimal fin geometries for the internally microfin tubes in the transition and turbulent regions. J Enhanc Heat Transf 19(5):457–476CrossRefGoogle Scholar
  103. Thome JR (2004) Engineering Data Book III, Wolverine Tube, Inc. pp 68–79Google Scholar
  104. Togun H, Abdulrazzaq T, Kazi SN, Kadhum AAH, Badarudin A, Ariffin MK, Sadeghinezhad E (2013) Numerical study of turbulent heat transfer in separated flow. Int Rev Mech Eng 7(2):337–349Google Scholar
  105. Togun H, Abu-Mulaweh HI, Kazi SN, Badarudin A (2016) Numerical simulation of heat transfer and separation Al2O3/nanofluid flow in concentric annular pipe. Int Commun Heat Mass Transf 71:108–117CrossRefGoogle Scholar
  106. Vakilaltojjar SM, Saman W (2001) Analysis and modelling of a phase change storage system for air conditioning applications. Appl Therm Eng 21:249–263CrossRefGoogle Scholar
  107. Voller VR (1990) Fast implicit finite-difference method for the analysis of phase change problems. Numer Heat Transf B 17:155–169CrossRefGoogle Scholar
  108. Wang HS, Rose JW (2004) Prediction of effective friction factors for single-phase flow in horizontal microfin tubes. Int J Refrig 27:904–913CrossRefGoogle Scholar
  109. Wang CC, Chiou CB, Lu DC (1996) Single-phase heat transfer and flow friction correlations for microfin tubes. Int J Heat Fluid Flow 17:500–508CrossRefGoogle Scholar
  110. Wang D, Tian R, Zhang Y, Li L, Shi L (2019) Experimental comparison of the heat transfer of supercritical R134a in a micro-fin tube and a smooth tube. Int J Heat Mass Transf 129:1194–1205CrossRefGoogle Scholar
  111. Webb RL, Scott MJ (1980) A parametric analysis of the performance of internally finned tubes for heat exchanger application. J Heat Transf 102:38CrossRefGoogle Scholar
  112. Webb RL, Narayanamurthy R, Thors P (2000) Heat transfer and friction characteristics of internal helical-rib roughness. J Heat Transf 122:134–142CrossRefGoogle Scholar
  113. Webb RL, Kim NH (2005) Principles of enhanced heat transfer, 2nd edn. Taylor & Francis, Boca Raton, FLGoogle Scholar
  114. Wu Z, Li W (2011) A new predictive tool for saturated critical heat flux in micro/mini-channels: effect of the heated length-to-diameter ratio. Int J Heat Mass Transf 54:2880–2889MathSciNetCrossRefGoogle Scholar
  115. Yang CY (1999) A critical review of condensation heat transfer predicting models effect of surface-tension force. J Enhanc Heat Transf 6:217–236CrossRefGoogle Scholar
  116. Yu B, Feng Y, Tong L, Que X, Chen Z (1999) Theoretical analysis of fin efficiency with frost deposition on heat exchanger surface. In: Proceedings of the 5th ASME/JSME thermal engineering joint conference, Paper ATJE99-6402Google Scholar
  117. Zalba B, Marin JM, Cabeza LF, Mehling H (2004) Free cooling of buildings with phase change materials. Int J Refrig 27:839–849CrossRefGoogle Scholar
  118. Zdaniuk G, Chamra LM, Mago PJ (2008) Experimental determination of heat transfer and friction in helically-finned tubes. Exp Thermal Fluid Sci 32(3):761–775CrossRefGoogle Scholar
  119. Zhang GM, Wu Z, Wang X, Li W (2012) Convective condensation of R410A in micro-fin tubes. J Enhanc Heat Transf 19(6):515–525CrossRefGoogle Scholar

Copyright information

© The Author(s), under exclusive license to Springer Nature Switzerland AG 2020

Authors and Affiliations

  • Sujoy Kumar Saha
    • 1
  • Hrishiraj Ranjan
    • 1
  • Madhu Sruthi Emani
    • 1
  • Anand Kumar Bharti
    • 1
  1. 1.Mechanical Engineering DepartmentIndian Institute of Engineering, Science and Technology, ShibpurHowrahIndia

Personalised recommendations