Advertisement

Oval and Flat Tube Geometries, Row Effects in Tube Banks, Local Heat Transfer Coefficient on Plain Fins, Performance Comparison, Numerical Simulation and Patents, Coatings

  • Sujoy Kumar Saha
  • Hrishiraj Ranjan
  • Madhu Sruthi Emani
  • Anand Kumar Bharti
Chapter
Part of the SpringerBriefs in Applied Sciences and Technology book series (BRIEFSAPPLSCIENCES)

Abstract

The performance of oval and flat tube geometries, coatings and effect of rows in tube banks are briefed in this chapter. The local heat transfer coefficients for plain fins are presented. The performance comparison of various fin geometries and works on numerical simulation and patents is reported.

Keywords

Oval tube Coatings Row effects Numerical simulation Patents Local heat transfer coefficient 

References

  1. Achaichia A, Cowell TA (1988) Heat transfer and pressure drop characteristics of flat tube and louvered plate fin surfaces. Exp Therm Fluid Sci 1:147–157CrossRefGoogle Scholar
  2. Bar-Cohen A, Rohsenow WM (1984) Thermally optimum spacing of vertical natural convection cooled parallel plates. J Heat Transf 106(1):116–123CrossRefGoogle Scholar
  3. Beamer HE, Cowell TA (1998) Heat exchanger cooling fin with varying louver angle. U.S. patent 5,730,214Google Scholar
  4. Bejan A, Morega M (1994) The optimal spacing of a stack of plates cooled by turbulent forced convection. Int J Heat Mass Transf 37(6):1045–1048CrossRefGoogle Scholar
  5. Bejan A, Sciubba E (1992) The optimal spacing of parallel plates cooled by forced convection. Int J Heat Mass Transf 35(12):3259–3264CrossRefGoogle Scholar
  6. Bemisderfer C, Wanner J (1991) Chevron lanced fin design with unequal leg lengths for a heat exchanger. U.S. patent 5,062,475Google Scholar
  7. Boewe D, Yin J, Park YC, Bullard CW, Hrnjak PS (1999) The role of suction line heat exchanger in transcritical R-744 mobile air-conditioning systems. SAE Int. Congress and Exposition, SAE 1999-01-0583Google Scholar
  8. Brauer H (1964) Compact heat exchangers. Chem Prog Eng (London) 45(8):451–460Google Scholar
  9. Canhoto P, Heitor Reis A (2011) Optimization of forced convection heat sinks with pumping power requirements. Int J Heat Mass Transf 54:1441–1447CrossRefGoogle Scholar
  10. Cox B (1973) Heat transfer and pumping power performance in tube banks—finned and bare. ASME Paper 73-HT-27Google Scholar
  11. Cox B, Jallouk PA (1973) Methods for evaluating the performance of compact heat exchanger surfaces. J Heat Transf 95:464–469CrossRefGoogle Scholar
  12. Davenport CJ (1983) Correlations for heat transfer and flow friction characteristics of louvered fin. In: Heat transfer—Seattle 1983, AIChE Sym. Ser., No. 225, vol 79, pp 19–27Google Scholar
  13. Eckels PW, Rabas TJ (1985) Heat transfer and pressure drop of typical air cooler finned tubes. J Heat Transf 107:198–204CrossRefGoogle Scholar
  14. Esformes JL (1989) Ramp wing enhanced plate fin. U.S. patent 4,817,709Google Scholar
  15. Fiebig M, Valencia A, Mitra NK (1994) Local heat transfer and flow losses in fin-and-tube heat exchangers with vortex generators: a comparison of round and flat tubes. Exp Therm Fluid Sci 8(1):35–45CrossRefGoogle Scholar
  16. Haberski RJ, Raco RJ (1976) Engineering analysis and development of an advanced technology low cost dry cooling tower heat transfer surface. Curtiss-Wright Corporation, Report No.Cod-2774-1Google Scholar
  17. Hatada T, Senshu T (1984) Experimental study on heat transfer characteristics of convex louver fins for air conditioning heat exchangers. ASME paper ASME 84-HT-74Google Scholar
  18. Hetsroni G, Mosyak A, Pogrebnyak E, Yarin LP (2011) Micro-channels: reality and myth. J Fluids Eng 133:121–202CrossRefGoogle Scholar
  19. Hu X, Jacobi AM (1993) Local heat transfer behavior and its impact on a single-row, annularly finned tube heat exchanger. J Heat Transf 115:66–74CrossRefGoogle Scholar
  20. Ikejima K, Gotoh T, Yumikura T, Takeshita M, Yoshita T (1998) Heat exchanger and method of fabrication the heat exchanger. U.S. patent 5,769,157Google Scholar
  21. Itoh M, Kogure H, Iino K, Ochiai I, Kitayama Y, Miyagi M (1986) Fin-and-tube type heat exchanger. U.S. patent 4593756Google Scholar
  22. Jang JY, Chen LK (1997) Numerical analysis of heat transfer and fluid flow in a three-dimensional wavy-fin and tube heat exchanger. Int J Heat Mass Transf 40(16):3981–3990CrossRefGoogle Scholar
  23. Jang Y-J, Chen H-C, Han J-C (2001) Computation of flow and heat transfer in two-pass channels with 60 deg ribs. J Heat Transf 123(3):563–575CrossRefGoogle Scholar
  24. Jones TV, Russell CMB (1980) Heat transfer distribution on annular fins. ASME Paper 78-HT-30Google Scholar
  25. Jung GH, Jung SH (1999) Heat exchanger fin having an increasing concentration of slits from an upstream to a downstream side of the fin. U.S. patent 5,934,363Google Scholar
  26. Kandlikar SG (1987) A general correlation for saturated two-phase flow boiling heat transfer inside horizontal and vertical tubes. In: Ragi EG, Rudy TM, Rabas TJ, Robertson JM (eds) Boiling and condensation in heat transfer equipment, HTD, vol 85, pp 9–20Google Scholar
  27. Kearney SP, Jacobi AM (1996) Local convective behavior and fin efficiency in shallow banks of in-line and staggered, annularly finned tubes. J Heat Transf 118(2):317–326CrossRefGoogle Scholar
  28. Kim JH, Jensen M, Jansen K (2002) Fin shape effects in turbulent heat transfer in tubes with helical fins. In: Heat transfer 2002. Proceedings of the 12th international heat transfer conference, vol 4, pp 183–188Google Scholar
  29. Kruckels SW, Kottke V (1970) Investigation of the distribution of heat transfer on fins and finned tube models. Chem Eng Tech 42:355–362Google Scholar
  30. Lehtinen A (2005) Analytical treatment of heat sinks cooled by forced convection. PhD thesis, Tampere university of technology, Tampere, FinlandGoogle Scholar
  31. Leu J-S, Liu M-S, Liaw J-S, Wang C-C (2001) A numerical investigation of louvered fin-and-tube heat exchangers having circular and oval tube configurations. Int J Heat Mass Transf 44:4235–4243CrossRefGoogle Scholar
  32. Lindstedt M, Karvinen R (2012) Optimization of isothermal plate fin arrays with laminar forced convection. J Enhanc Heat Transf 19(6):535–547CrossRefGoogle Scholar
  33. Manglik RM, Zhang JH, Muley A (2005) Low Reynolds number forced convection in three-dimensional wavy-plate-fin compact channels: fin density effects. Int J Heat Mass Transf 48:1439–1449CrossRefGoogle Scholar
  34. McQuiston FC (1978) Correlation of heat, mass, and momentum transport coefficients for plate-fin-tube heat transfer for surfaces with staggered tube. ASHRAE Trans 54(Part 1):294–309Google Scholar
  35. Min J, Webb RL (2000) Condensate carryover phenomena in dehumidifying, finned-tube heat exchangers. Exp Therm Fluid Sci 22:175–182CrossRefGoogle Scholar
  36. Min J, Webb RL (2004) Numerical analyses of effects of tube shape on performance of a finned tube heat exchanger. J Enhanc Heat Transf 11:61–74CrossRefGoogle Scholar
  37. Min J, Webb RL, Bemisderfer CH (2000) Long-term hydraulic performance of dehumidifying heat-exchangers with and without hydrophilic coatings. Int J HVAC&R Res 6(3):257–272CrossRefGoogle Scholar
  38. Mirth DR, Ramadhyani S (1993) Comparison of methods of modeling the air-side heat and mass transfer in chilled water cooling coils. ASHRAE Trans 99(Pt. 2):285–299Google Scholar
  39. Mori Y, Nakayama W (1980) Recent advances in compact heat exchangers in Japan. In: Shah RK, McDonald CF, Howard CP (eds) Compact heat exchangers—history, technology, manufacturing technologies. ASME Symp. HTD, vol 10, pp 5–16Google Scholar
  40. Muzychka YS (2005) Constructal design of forced convection cooled microchannel heat sinks and heat exchangers. Int J Heat Mass Transf 48:3119–3127CrossRefGoogle Scholar
  41. Neal SBHC, Hitchcock JA (1966) A study of the heat transfer processes in banks of finned tubes in cross flow, using a large scale model technique. In: Proceedings of the third international heat transfer conference, vol 3. American Institute of Chemical Engineers, pp 290–298Google Scholar
  42. O’Brien JE, Sohal MS, Wallstedt PC (2001) Local heat transfer and pressure drop for finned-tube heat exchangers using oval tubes and vortex generators. In: Proceedings of 2001 ASME international mechanical engineering congress and exposition, ASME, New York, Paper No. IMECE2001/HTD-24118Google Scholar
  43. O’Connor JM, Pasternak SF (1976) Method of making a heat exchanger. U. S. Patent 3,947,941Google Scholar
  44. Onishi H, Inaoka K, Matsubara K, Suzuki K (1999) Numerical analysis of flow and conjugate heat transfer of two-row plate-finned tube heat exchanger. In: Shah RK, Bell KJ, Honda H, Thonon B (eds) Proceedings of the international conference on compact heat exchangers and enhancement technology for the process industries. Begell House Inc., New York, pp 175–183Google Scholar
  45. Rabas TI, Huber FV (1989) Row number effects on the heat transfer performance of in-line finned tube banks. Heat Transf Eng 10(4):19–29CrossRefGoogle Scholar
  46. Rabas TJ, Myers GA, Eckels PW (1986) Comparison of the thermal performance of serrated high-finned tubes used in heat-recovery systems. In: Chiou JP, Sengupta S (eds) Heat transfer in waste heat recovery and heat rejection systems. ASME Symp. HTD, vol 59, pp 33–40Google Scholar
  47. Saboya FEM, Sparrow EM (1974) Local and average heat transfer coefficients for one-row plate fin and tube heat exchanger configurations. J Heat Transf 96:265–272CrossRefGoogle Scholar
  48. Saboya FEM, Sparrow EM (1976a) Experiments on a three-row fin and tube heat exchanger. J Heat Transf 98:520–522CrossRefGoogle Scholar
  49. Saboya FEM, Sparrow EM (1976b) Transfer characteristics of two-row plate fin and tube heat exchanger configurations. Int Heat Mass Transf 19:41–49CrossRefGoogle Scholar
  50. Saha A (2008) Effect of the number of periodic module on flow and heat transfer in a periodic array of cubic pin-fins inside a channel. J Enhanc Heat Transf 15(3):243–260CrossRefGoogle Scholar
  51. Sheui TWH, Tsai SF, Chiang TP (1999) Numerical study of heat transfer in two-row heat exchangers having extended fin surfaces. Numer Heat Transf Part A 35(7):797–814CrossRefGoogle Scholar
  52. Somchai W, Yutasak C (2005) Effect of fin pitch and number of tube rows on the air side performance of herringbone wavy fin and tube heat exchangers. Energy Convers Manag 46:2216–2231CrossRefGoogle Scholar
  53. Tanaka T, Hatada T, Itoh M, Senshu T, Katsumata N, Michizuki Y, Terada H, Izushi M, Sato M, Tsuji H, Nagai M (1994) Fin-tube heat exchanger. U.S. patent 5,360,060Google Scholar
  54. Tao YB, He YL, Wu ZG, Tao WQ (2007) Three-dimensional numerical study and field synergy principle analysis of wavy fin heat exchangers with elliptic tubes. Int J Heat Fluid Flow 28(6):1531–1544CrossRefGoogle Scholar
  55. Teertstra P, Yovanovich MM, Culham JR (2000) Analytical forced convection modeling of plate fin heat sinks. J Electron Manuf 10(4):253–261CrossRefGoogle Scholar
  56. Torikoshi K, Xi G (1995) A numerical study of flow and thermal fields in finned tube heat exchangers. In: Proceedings of the IMECE, HTD, vol 317-1, pp 453–458Google Scholar
  57. Torikoshi K, Xi GN, Nakazawa Y, Asano H (1994) Flow and heat transfer performance of a plate fin-and-tube heat exchanger (1st report: effect of fin pitch). In: Heat transfer 1994. Proceedings of the 10th international heat transfer conference, vol 4, pp 411–416Google Scholar
  58. Tsai SF, Sheu TWH, Lee SM (1999) Heat transfer in a conjugate heat exchanger with a wavy fin surface. Int J Heat Mass Transf 42:1735–1745CrossRefGoogle Scholar
  59. Ueda H, Hatada T, Kunugi N, Ooucgi T, Sugimoto S, Shimizu T, Kohno K (1994) Heat transfer fins and heat exchanger. U.S. patent 5,353,886Google Scholar
  60. Valencia A, Fiebig M, Mitra NK (1996) Heat transfer enhancement by longitudinal vortices in a fin-tube heat exchanger element with flat tubes. J Heat Transf 118(1):209–211CrossRefGoogle Scholar
  61. Wang CC, Fu WL, Chang CT (1997) Heat transfer and friction characteristics of typical wavy fin-and-tube heat exchangers. Heat Transf Friction Charact 14:174–186Google Scholar
  62. Wang CC, Jang JY, Chiou NF (1999) A heat transfer and friction correlation for wavy fin-and-tube heat exchangers. Int J Heat Mass Transf 42:1919–1924CrossRefGoogle Scholar
  63. Wang C-C (2000) Recent progress on the air-side performance of fin-and-tube heat exchangers. Int J Heat Exchanges 1:49–76Google Scholar
  64. Wang C-C, Chi K-Y, Chang C-J (2000) Heat transfer and friction characteristics of plain fin-and-tube heat exchangers, part II: correlation. Int J Heat Mass Transf 43:2693–2700CrossRefGoogle Scholar
  65. Webb RL (1990) The flow structure in the louvered fin exchanger geometry. SAE Int. Congress and Exposition, SAE 900722Google Scholar
  66. Webb RL, Gupte N (1990) Design of light weight heat exchangers for air-to-two phase service. In: Shah RK, Kraus AD, Metzger D (eds) Compact heat exchangers: a Festschrift for A. L. London. Hemisphere Publishing Corp., Washington, pp 311–334Google Scholar
  67. Webb RL, Iyengar A (2001) Oval finned tube condenser and design pressure limits. J Enhanc Heat Transf 8:147–158CrossRefGoogle Scholar
  68. Webb RL, Kim NY (2005) Principles of enhanced heat transfer. Taylor & Francis, New YorkGoogle Scholar
  69. Wieting AR (1975) Empirical correlations for heat transfer and flow friction characteristics of rectangular offset fin heat exchangers. J Heat Transf 97:488–490CrossRefGoogle Scholar
  70. Wu JM, Tao WQ (2007) Numerical computation of laminar natural convection heat transfer around a horizontal compound tube with external longitudinal fins. Heat Transf Eng 28(2):93–102CrossRefGoogle Scholar
  71. Xin RC, Li HZ, Kang HJ, Li W, Tao WQ (1994) An experimental investigation on heat transfer and pressure drop characteristics of triangular wavy fin-and-tube heat exchanger surfaces. J Xi’an Jiaotong Univ 28(2):77–83Google Scholar
  72. Yilmaz A, Büyükalaca O, Yilmaz T (2000) Optimum shape and dimensions of ducts for convective heat transfer in laminar flow at constant wall temperature. Int J Heat Mass Transf 43:767–775CrossRefGoogle Scholar
  73. Youn B, Kim YS (1998) Heat exchanger fins of an air conditioner. U.S. patent 5725625Google Scholar
  74. Yun J-Y, Kim H-Y (1997) Structure of heat exchanger. U.S. patent 5697432Google Scholar

Copyright information

© The Author(s), under exclusive license to Springer Nature Switzerland AG 2020

Authors and Affiliations

  • Sujoy Kumar Saha
    • 1
  • Hrishiraj Ranjan
    • 1
  • Madhu Sruthi Emani
    • 1
  • Anand Kumar Bharti
    • 1
  1. 1.Mechanical Engineering DepartmentIndian Institute of Engineering, Science and Technology, ShibpurHowrahIndia

Personalised recommendations