Advertisement

Stability analysis of an asbestos removal mobile manipulator for safe grinding trajectories

  • Siddharth MarajeEmail author
  • Jean-Christophe Fauroux
  • Chedli-Belhassen Bouzgarrou
  • Lounis Adouane
Conference paper
Part of the Mechanisms and Machine Science book series (Mechan. Machine Science, volume 73)

Abstract

Process of robotic asbestos removal from rehabilitation sites involves dynamic interactions between the abrasive grinding tool and the surface to be cleaned. Moreover, necessity of compact manipulator design yields a mobile base with smaller support polygon. In such case, stability becomes a critical issue. This paper presents an approach for stability estimation by analytically simulating grinding operation. Based on results of stability analysis, a grinding trajectory while ensuring manipulator stability is proposed. Analytical results are then validated through co-simulation.

Keywords

mobile manipulator stability analysis trajectory planning 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Acknowledgment

Bots2ReC project is funded by the EU H2020 research and innovation program (Grant agreement No: 687593).

References

  1. 1.
    Bots2ReC Homepage, https://www.bots2rec.eu, last accessed 2018/10/25
  2. 2.
    Detert, T., Charaf Eddine, S., Fauroux, JC. et al: Bots2ReC: introducing mobile robotic units on construction sites from asbestos rehabilitation. Construction Robotics (1), 29-37 (2017).Google Scholar
  3. 3.
    Arai, M., Hoshino, H., Robot system for removing asbestos sprayed on beams. In: 28th International Symposium on Automation and Robotics in Construction (ISARC), pp. 1409 - 1414. Seoul, Korea (2011),Google Scholar
  4. 4.
    Geogebra Homepage, https://www.geogebra.org, last accessed 2018/11/12
  5. 5.
    Huang, Q., Tanie, K., Sugano, Shigeki.: Coordinated motion planning for a mobile manipulator considering stability and manipulation. International journal of robotics research (19), 732 (2000)Google Scholar
  6. 6.
    Korayem, M., Azimirad, V., Nikoobin A., Bouroujeni, Z.: Maximium load-carrying capacity of autonomous mobile manipulator in an environment with obstacle considering tip over stability. International journal of advanced manufacturing technology (46), 811-829.Google Scholar
  7. 7.
    Khalil, A., Daemi, P., Hassanpour, A., Tarvirdizadeh, B.: On the capability of wheeled mobile robots for heavy object manipulation considering dynamic stability constraints. Multibody system dynamics (41:2), 101-123 (2017)Google Scholar
  8. 8.
    Maraje, S., Fauroux, J-C., Dimensional synthesis of a robotic arm for mobile manipulator using an interactive geometric software. In: Proceedings of The 12th IFToMM International Symposium on Science of Mechanisms and Machines, pp 253-261. Iasi, Romania (2017)Google Scholar
  9. 9.
    Corke, P.: Robotics, Vision & Control: Fundamental Algorithms in Matlab, Springer, 2011.Google Scholar
  10. 10.
    Khalil, W., Dombre E.: Modeling, Identification and Control of Robots, CRC Press, 2002.Google Scholar
  11. 11.
    Vukobratovic, M., Juricic, D., Contribution to the synthesis of biped gait, In: Proceedings of IFAC Symposium on Technical and Biological Problems on Control, Erevan, USSR, (1968)Google Scholar
  12. 12.
    Choset H., Pignon, P., Coverage path planning: The boustrophedon cellular decomposition, in International Conference on Field and Service Robotics, Canberra, Australia, (1997).Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Siddharth Maraje
    • 1
    Email author
  • Jean-Christophe Fauroux
    • 1
  • Chedli-Belhassen Bouzgarrou
    • 1
  • Lounis Adouane
    • 2
  1. 1.Institut Pascal, SIGMA ClermontUniversité Clermont Auvergne, CNRSClermontFerrandFrance
  2. 2.Institut PascalUniversité Clermont Auvergne, CNRSClermontFerrandFrance

Personalised recommendations