Advertisement

Daylight

  • Wout van Bommel
Chapter

Abstract

Light is emitted at the outer layer of the sun, the photosphere. Due to the earth’s atmosphere, we also receive indirect sunlight that is scattered from microscopic particles in the earth atmosphere which makes the sky bright and bluish. The daylight varies with the sun’s position which is dependent on the time of the year and day and on the location on earth. Weather conditions influence the sky condition and therefore also the daylight level and spectrum.

CIE has defined spectra for a series of standard illuminants that represent the spectra of daylight of different correlated colour temperatures. CIE also defined different standard luminance distributions of skies for the purpose of daylight calculations. The CIE standard overcast sky is usually used to determine the daylight factor that predicts the potential of daylight in buildings depending on exterior obstructions, fenestration and interior inter-reflection. At many locations on earth, daylight measurements have been made that give quantitative data on the amount of daylight. By combining these location-specific data with daylight factors, detailed insight is obtained in how much of the time and where in the lit space sufficient daylight will be present.

The flow of daylight through vertical windows is much more horizontal than that of electric lighting from the ceiling. This has consequences for the quality of a day-lit space.

For the designer of electric lighting installations to understand the interaction between “his or her” lighting installation and daylighting in “his or her” building, a basic knowledge of daylight is indispensable.

References

  1. CIE (1999) A method of assessing the quality of daylight simulators for colorimetry. Technical Report CIE 051.2-1999Google Scholar
  2. CIE (2014) CIE standard general sky guide. Technical Report CIE 215:2014Google Scholar
  3. ISO (2004) Spatial distribution of daylight—CIE standard general sky. ISO 15469:2004/CIE S011/E:2003Google Scholar
  4. ISO (2007) Colorimetry—part2: CIE standard illuminants for colorimetry. ISO 11664-2:2007/CIE14-2/E:2006Google Scholar
  5. Kittler R, Kocifaj M, Darula S (2012) Daylight science and daylighting technology. Springer, New York, Dordrecht, Heidelberg, LondonCrossRefGoogle Scholar
  6. Mardaljevic J (2016) Daylighting. In: Luo MR (ed) Encyclopedia of color science and technology, vol 1. Springer Science+Business Media, New York, pp 558–571Google Scholar
  7. Mardaljevic J, Christoffersen J (2017) ‘Climate connectivity’ in the daylight factor basis of building standards. Build Environ 113:200–209CrossRefGoogle Scholar
  8. Muneer T (2004) Solar radiation and daylight models, 2nd edn. Elsevier-Butterworth-Heinemann, OxfordGoogle Scholar
  9. Tregenza P, Loe D (2009) The design of lighting. E & FN Spon, LondonGoogle Scholar
  10. Tregenza P, Wilson M (2011) Daylighting, architecture and lighting design. Routledge, AbingdonGoogle Scholar
  11. Tregenza P, Mardaljevic J (2018) Daylighting buildings: standards and the needs of the designer. Lighting Res Technol 50:63–79CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Wout van Bommel
    • 1
  1. 1.Van Bommel Lighting ConsultantNuenenThe Netherlands

Personalised recommendations