Advertisement

Lamps, Gear and Drivers

  • Wout van Bommel
Chapter

Abstract

Since the early 60s of last century small solid-state, low-brightness, light-emitting diodes (LEDs) have been widely used as indicator and signal lamps. Only after the development of a high-power blue-light LED in 1995 it became possible to produce white-light LEDs. From that moment onwards, solid-state lighting became gradually available as a fundamentally new type of light source. Today, for most lighting applications, LEDs have taken over from all traditional light sources including gas-discharge lamps. This is for reasons of efficiency, long lifetime and because more emphasis is placed on improved colour quality and tunability of light. LEDs also have distinct benefits for smart lighting.

LEDs offer many new possibilities of designing lighting installations that truly fulfil end users varying needs in a cost- and energy-friendly way. However, to be successful in realising such installations, a thorough knowledge of the properties of solid-state light sources is needed. For this purpose, this chapter explains the fundamental principle of light emission by solid-state lamps and describes their construction and properties. Both inorganic LEDs and organic planar OLEDs are dealt with.

Of the traditional light sources, the incandescent, halogen, tubular and compact fluorescent, compact metal-halide and induction lamps will be still quite some time around. Therefore, but also because they still often act as the standard against which new light sources are compared, these traditional lamps are also described in this chapter.

References

  1. Anikeeva PO, Halpert JE, Bawendi MG, Bulovic V (2009) Quantum dot light-emitting devices with electroluminescence tunable over the entire visible spectrum. Nano Lett 9(7):2532–2536ADSCrossRefGoogle Scholar
  2. ANSI (2008) ANSI C78.377-2008 American National Standard for Electric Lamps—Specifications for the chromaticity of solid-state lighting productsGoogle Scholar
  3. ANSI (2017) ANSI C78.377-2017 American National Standard for Electric Lamps—Specifications for the chromaticity of solid-state lighting productsGoogle Scholar
  4. Baumgartner H, Renoux D, Kärhä P, Poikonen T, Pulli T, Ikonen E (2016) Natural and accelerated ageing of LED lamps. Lighting Res Technol 48:930–942CrossRefGoogle Scholar
  5. Begemann S, Kock A (1998) European Patent EP 0 890 059 “Luminaire”. Filed 22 January 1998; granted 23 July 2004Google Scholar
  6. Cho J, Schubert EF, Kim JK (2013) Efficiency droop in light-emitting diodes: challenges and countermeasures. Laser Photonics Rev 7(3):408–421ADSCrossRefGoogle Scholar
  7. Coaton JR, Marsden AM (eds) (1997) Lamps and lighting, 4th edn. Arnold; John Wiley & Sons, London; New York, TorontoGoogle Scholar
  8. Dai X, Zhang Z, Jin Y, Niu Y, Cao H, Liang X, Chen L, Wang J, Peng X (2014) Solution-processed, high-performance light-emitting diodes based on quantum dots. Nature 515(7525):96–99ADSCrossRefGoogle Scholar
  9. Danz N, Wächter CA, Michaelis D, Dannberg P, Flämmich M (2012) Micro optical pattern shaping for tailored light emission from organic LEDs. Opt Express 20(12):1269CrossRefGoogle Scholar
  10. DOE (2017) Solid-state lighting 2017 suggested research topics. U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, WashingtonGoogle Scholar
  11. Dyble M, Narendran N, Bierman, A, Klein T, (2005) Impact of dimming white LEDs: chromaticity shifts due to different dimming methods. Proceedings of the SPIE Fifth International Conference on Solid State Lighting 5941, PP 291–299Google Scholar
  12. Fan JJ, Yung KC, Pecht M (2012) Lifetime estimation of high-power white LED using degradation-data-driven method. IEEE Trans Device Mater Reliab 12:470–477CrossRefGoogle Scholar
  13. He L, Mei S, Chen Q, Zhang W, Zhang J, Zhu J, Chen G, Guo R (2016) Two-step synthesis of highly emissive C/ZnO hybridized quantum dots with a broad visible photoluminescence. Appl Surf Sci 364:710–717ADSCrossRefGoogle Scholar
  14. Holonyak N Jr, Bevacqua SF (1962) Coherent (visible) light emission from Ga(As1-xPx) junctions. Appl Phys Lett 1:82–83ADSCrossRefGoogle Scholar
  15. IEC (2015) IEC 62717 edition 1.1. LED modules for general lighting—performance requirementsGoogle Scholar
  16. IEEE (2009) IEEE Std 802.3at-2009—IEEE Standard for Information Technology—Local and metropolitan area networks—Specific requirements—Part 3: CSMA/CD Access Method and Physical Layer Specifications Amendment 3: Data Terminal Equipment (DTE) Power via the Media Dependent Interface (MDI) EnhancementsGoogle Scholar
  17. IEEE (2018) IEEE Std 802.3bt—IEEE Standard for Ethernet Amendment: Power over Ethernet over 4 PairsGoogle Scholar
  18. IES (2008) LM-80-08 Approved method: measuring lumen maintenance of LED light sourcesGoogle Scholar
  19. IES (2011) TM-21-11 Projecting long term lumen maintenance of LED light sourcesGoogle Scholar
  20. IES (2014) TM-28-14 projecting long-term luminous flux maintenance of LED lamps and luminairesGoogle Scholar
  21. IES (2015a) Addendum B for TM-21-11 Projecting long term lumen maintenance of LED light sourcesGoogle Scholar
  22. IES (2015b) Errata #1 for LM-80-08 Approved method: measuring lumen maintenance of LED light sourcesGoogle Scholar
  23. Jhalani VA, Zhou JJ, Bernardi M (2017) Ultrafast hot carrier dynamics in GaN and its impact on the efficiency droop. Nano Lett 17(8):5012–5019ADSCrossRefGoogle Scholar
  24. Johnstone B (2007) Brilliant ! Shuji Nakamura and the revolution in lighting technology. Prometheus Books, New YorkGoogle Scholar
  25. Johnstone B (2017) L.E.D.: a history of the future of lighting. Createspace Independent Publishing Platform, Scotts Valley, CAGoogle Scholar
  26. Khanh TC, Bodrogi P, Vinh QT, Winkler H (eds) (2015) LED lighting technology and perception. Wiley-VCH Verlag GmbH & Co, WeinheimGoogle Scholar
  27. Kim MH, Schubert MF, Dai Q, Kim JK (2007) Origin of efficiency droop in GaN-based light-emitting diodes. Appl Phys Lett 91:183507ADSCrossRefGoogle Scholar
  28. Kioupakis E, Rinke P, Delaney KT, Van De Walle CG (2011) Indirect auger recombination as a cause of efficiency droop in nitride light-emitting diodes. Appl Phys Lett 98(16):161107ADSCrossRefGoogle Scholar
  29. Lall P, Wei J (2015) Prediction of L70 life and assessment of color shift for solid-state lighting using Kalman filter and extended Kalman filter-based models. IEEE Trans Device Mater Reliab 15, 15(1)CrossRefGoogle Scholar
  30. Lassane CJM, Poppe A (eds) (2014) Thermal management for LED applications. Springer, New York, Heidelberg, Dordrecht, LondonGoogle Scholar
  31. Lee J-G, Yoo D-H, Shin HH, Sim SH, Park JS, Ko J-H (2017) Reshaping the luminance distribution of OLED lighting using optical films. J Information Display 18(4):177–184CrossRefGoogle Scholar
  32. Li Z-Y, Kuo H-C, Shieh C-Y, Chiu C-H, Tu P-M, Uen W-Y (2017) LED materials: epitaxy and quantum well structures. In: Karlicek R et al (eds) Handbook of advanced lighting technology. Springer, ChamGoogle Scholar
  33. Meneghini M, NicolaTrivellin M, Mura G, Vanzi M, Meneghesso G, Zanoni E (2012) Chip and package-related degradation of high power white LEDs. Microelectron Reliab 52:804–812CrossRefGoogle Scholar
  34. Meyer C, Nienhuis H (1988) Discharge lamps. Kluwer Technische Boeken, DeventerGoogle Scholar
  35. Nakamura S, Senoh M, Iwasa N, Nagahama S (1995) High-power InGaN single-quantum-well-structure blue and violet light-emitting diodes. Appl Phys Lett 67(13):114359–114362CrossRefGoogle Scholar
  36. Ohno Y (2004) Color rendering and luminous efficacy of white LED spectra. In: Proceedings SPIE 4th international conference on solid state lighting, vol 5530, pp 88–98Google Scholar
  37. Padmasali AN, Kini SG (2017) LED life prediction based on lumen depreciation and colour shift. Lighting Res Technol 49:84–99CrossRefGoogle Scholar
  38. Polin D, Wagner M, Khanh TQ (2017) Reducing the stroboscopic effects of LED luminaires with pulse width modulation control. Lighting Res Technol 49:370–380CrossRefGoogle Scholar
  39. Round HJ (1907) A note on carborundum. Electric World 49:309Google Scholar
  40. Royer M (2014) Lumen maintenance and light loss factors: consequences of current design practices for LEDs. Leukos 10:77–86CrossRefGoogle Scholar
  41. Rubinstein F (2017) Adaptive control technology for lighting systems. In: Karlicek R et al (eds) Handbook of advanced lighting technology. Springer, ChamGoogle Scholar
  42. Schubert EF (2018) Light-emitting diodes, 3rd edn. Cambridge University Press, CambridgeGoogle Scholar
  43. Stevenson R (2009) The LEDs dark secret. Spectrum, IEEE 46:26–31CrossRefGoogle Scholar
  44. Talapin DV, Steckel J (2013) Quantum dot light-emitting devices. Mat Res Soc Bull 38:685–691CrossRefGoogle Scholar
  45. Van Driel WD, Fan XJ (eds) (2013) Solid state lighting reliability: components to systems. Springer Science+Business Media, New YorkGoogle Scholar
  46. Zhaga (2017) Zhaga interface specification, Book 1: overview and common information, edition 1.8Google Scholar
  47. Zhu J, Mei S, Yang W, Zhang G, Chen Q, Zhang W, Guo R (2017) Tunable emission of Cu (Mn)-doped ZnInS quantum dots via dopant interaction. J Colloid Interface Sci 506:27–35ADSCrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Wout van Bommel
    • 1
  1. 1.Van Bommel Lighting ConsultantNuenenThe Netherlands

Personalised recommendations