Advertisement

Wire EDM Characteristics of Biomedical Alloy AISI 316L

  • Amey Pawade
  • Justin Mariyil
  • Lakshmi Ilanko
  • Pushkar Mahale
  • Raju PawadeEmail author
Conference paper

Abstract

In the present study, the effect of process parameters on kerf width, surface roughness and material removal rate in Wire electro-discharge machining (WEDM) of biomedical alloy 316 L has been studied. The process parameters considered were gap voltage, pulse on time, pulse off time and servo feed. The machining has been performed as per Taguchi design of experiments approach using an L9 orthogonal array. The results were analyzed using analysis of variance (ANOVA). Pulse on time was the most significant parameter influencing the surface roughness. Gap voltage shows the most significant effect on the kerf width. According to grey relational analysis, the optimized parameters setting obtained is 16 μs pulse on time, 50 μs pulse off time, 50 V gap voltage and 1950 units as servo feed as per GRA value.

Keywords

Wireedm Kerf Roughness Taguchi Greyrelational 

References

  1. 1.
    Moulton DB (2013) Wire EDM “The fundamentals”. EDM Network, IllinoisGoogle Scholar
  2. 2.
    Lodhi BK, Agarwal S (2014) Optimization of machining parameters in WEDM of AISI D3 steel using Taguchi technique. Proceedia CIRP 14:194–199CrossRefGoogle Scholar
  3. 3.
    Cyraic S, Sharos H (2015) Optimization of Wire EDM parameters of EN 24 steel by Taguchi method. Int J Eng Res Technol 4(8):633–636Google Scholar
  4. 4.
    Vijaya Babu T, Soni JS (2017) Optimization of WEDM parameters for surface roughness on AISI 316L stainless steel using ANOVA. Int J Latest Trends Eng Technol 8(1):212–215Google Scholar
  5. 5.
    Venkateswarlu G, Devaraj P (2015) Optimization of machining parameters in Wire EDM of copper using Taguchi analysis. Int J Adv Mater Res 1(4):126–131Google Scholar
  6. 6.
    Kanna SK, Sethuramalingam P (2017) Stainless steel 316 Wire EDM process parameter optimization by using Taguchi technique. Int J Emerging Res Management&Technol 6(2):69–73Google Scholar
  7. 7.
    Kumar K, Agarwal S (2012) Multi-objective parametric optimization on machining with wire electric discharge machining. Int J Adv Manuf Technol 62:617–633CrossRefGoogle Scholar
  8. 8.
    Durairaj M, Sudharsun D, Swamynathan N (2013) Analysis of process parameters in Wire EDM with stainless steel using single objective Taguchi method and multi-objective grey relational grade. Procedia Eng 64:868–877CrossRefGoogle Scholar
  9. 9.
    Tilekar S, Das SS, Patowari PK (2014) Process parameter optimization of Wire EDM of aluminum and mild steel using Taguchi method. Procedia Mater Sci 5:2577–2584CrossRefGoogle Scholar
  10. 10.
    Muniappan A, Thiagarajan C, Somasundaran S (2017) Optimization of kerf width obtained in WEDM of aluminum hybrid composite using Taguchi method. ARPN J Eng Appl Sci 12(2):382–388Google Scholar
  11. 11.
    Ugrasen G, Singh MR, Ravindra HV (2018) Optimization of process parameters for SS304 in wire electrical discharge machining using Taguchi’s technique. In: Materials today: proceedings, pp 2877–2833Google Scholar
  12. 12.
    Huang JT, Liao YS (2003) Optimization of machining parameters of Wire EDM based on Grey relational and statistical analyses. Int J Prod Res 41(8):1707–1720CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • Amey Pawade
    • 1
  • Justin Mariyil
    • 1
  • Lakshmi Ilanko
    • 1
  • Pushkar Mahale
    • 1
  • Raju Pawade
    • 2
    Email author
  1. 1.Sinhgad College of EngineeringVadgaon, PuneIndia
  2. 2.Dr. Babasaheb Ambedkar Technological UniversityLonereIndia

Personalised recommendations