Advertisement

CFD Investigation on Fluid Flow Analysis in Fluid Separator

  • Pranita Shinde
  • Pramod Kothmire
  • Yogesh Bhalerao
Conference paper

Abstract

The analysis of fully developed flow in the two fluid separators is an important issue in the industry such as production, processing, and petrochemical. The role of the two fluid separator is to separate two different fluid by using an appropriate mechanism without changing the quality. In this study, we have reviewed different mechanisms of two fluid separations such as gravity sedimentation, centrifugation, and electro kinetics, etc. The current work focuses on the design aspect of a fluid separator with respect to geometry and thermal design. CFD has been used to simulate flow in a fluid separator and its results have been verified experimentally. Flow rates used in the simulation have different values in interval 0.1 LPM. The study shows the best performance of fluid separator with respect to shape and flow rates. The given work helps to co-relate various design of separator in the industry with laboratory separators.

Keywords

CFD Flow distributor Flow rates Velocity Fluid separator 

References

  1. 1.
    Arnold KE, Koszola PJ (1990) Droplet-settling vs. retention-time theories for sizing oil/water separator. SPE Prod Eng 5:59–64.  https://doi.org/10.2118/16640-pa CrossRefGoogle Scholar
  2. 2.
    Cunha RE, Fortuny M, Dariva C, Santos AF (2008) Mathematical modeling of the destabilization of oilemulsions using population balance equation. Ind Eng Chem Res 47:7094–7103CrossRefGoogle Scholar
  3. 3.
    Dezhi S, Chung JS, Xiaodong D, Ding Z (1999) Demulsification of water-in-oil emulsion by wetting coalescence materials in stirred-and packed-columns. Colloids Surf A Physicochem Eng Asp 150:69–75CrossRefGoogle Scholar
  4. 4.
    Goto M, Irie J, Kondo K, Nakashio F (1989) Electrical demulsification of W/O emulsion by continuous tubular coalescer. J Chemical Eng Japan 22:401–406CrossRefGoogle Scholar
  5. 5.
  6. 6.
    Less S, Vilagines R (2012) The electrocoalescers technology: advances, strengths and limitations for oil separation. J Pet Sci Eng 81:57–63.  https://doi.org/10.1016/j.petrol.2011.12.003 CrossRefGoogle Scholar
  7. 7.
    Meidanshahi V, Jahanmiri A, Rahimpour MR (2012) Modeling and optimization of two stage AC electrostatic desalter. Sep Sci Technol 47:30–42.  https://doi.org/10.1080/01496395.2011.614316 CrossRefGoogle Scholar
  8. 8.
    Sjöblom J, Aske N, Auflem IH, Brandal Ø, Havre TE, Sæther Ø et al (2003) Our current understanding of water-in-oil emulsions: recent characterization techniques and high pressure performance. Adv Colloid Interface Sci 100:399–473CrossRefGoogle Scholar
  9. 9.
    Kokal SL, others (2005) Crude oil emulsions: a state-of-the-art review. SPE Prod Facil 20:5–13CrossRefGoogle Scholar
  10. 10.
    Wojtanowicz AK, Xu H, Bassiouni Z (1994) Segregated production method for oil wells with active water coning. J Pet Sci Eng 11:21–35.  https://doi.org/10.1016/0920-4105(94)90060-4 CrossRefGoogle Scholar
  11. 11.
    Peronski L, Bratley R, Ingham DB, Ma L, Pourkashanian M (2009) Fluid flow analysis and design of a flow distributor in a domestic gas boiler using a commercial CFD softwareGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • Pranita Shinde
    • 1
  • Pramod Kothmire
    • 1
  • Yogesh Bhalerao
    • 1
  1. 1.School of Mechanical and Civil EngineeringMIT Academy of EngineeringAlandi, PuneIndia

Personalised recommendations