Advertisement

A 3D-Printed Prosthetic Hand with Modular Reconfigurable Fingers

  • Renato Mio
  • Marlene Bustamante
  • Giancarlo Salazar
  • Dante A. EliasEmail author
Conference paper
Part of the Mechanisms and Machine Science book series (Mechan. Machine Science, volume 71)

Abstract

Partial hand and transradial amputations are among the most common levels of amputation. In the former case, a mechanical prosthesis is prescribed, while in the latter case either a mechanical or a myoelectric one are used depending on the patient’s preference and access to the technology. While a variety of prostheses designs are aimed to transradial amputees and plenty others are for partial hand amputations, like the 3D-printed open-source concepts that are activated by the user’s wrist, for a faster and more efficient treatment of hand amputations, one design should be adaptive for different levels of amputation without compromising the prosthesis performance. This work describes a powered prosthesis design with modular fingers and space constraints that allow it to be adapted to different levels of amputation. The prosthesis finger lengths could also be customized to user-specific anthropometry and, besides shafts, bolted connections and electronic components, the whole hand can be 3D printed.

Notes

Acknowledgements

This work was supported by the National Council of Science, Technology and Innovation (CONCYTEC), for a Basic and Applied Research Grant, with grant number 160-2015.

References

  1. 1.
    Xu, Z., Torodov, E.: Design of a highly biomimetic anthropomorphic robotic hand towards artificial limb regeneration. In: 2016 IEEE International Conference on Robotics and Automation (ICRA), Stockholm (2016)Google Scholar
  2. 2.
    Rea, P.: On the design of underactuated finger mechanisms for robotic hands. In: Advances in Mechatronics, Shanghai, InTech, pp. 131–155 (2011)Google Scholar
  3. 3.
    Jin, J., Zhang, W., Sun, Z., Chen, Q.: LISA hand: indirect self-adaptive robotic hand for robust grasping and simplicit. In: International Conference on Robotics and Biomimetics, Guangzhou (2012)Google Scholar
  4. 4.
    Mio, R., Villegas, B., Ccorimanya, L., Flores, K.M., Salazar, G., Elías, D.: Development and assessment of a powered 3D-printed prosthetic hand for transmetacarpal amputees. In: 3rd International Conference on Control, Automation and Robotics (ICCAR), Nagoya (2017)Google Scholar
  5. 5.
    Frievalds, A.: Biomechanics of the Upper Limbs: Mechanics, Modeling and Muskuloskeletal Injuries, p. 204. CRC Press LLC, Florida (2004)Google Scholar
  6. 6.
    Hutchinson, A.L., Hutchinson, R.L.: Fibonacci, littler, and the hand: a brief review. Hand 5(4), 364–368 (2010)CrossRefGoogle Scholar
  7. 7.
    Gerruti, G., Chablat, D., Gouaillier, D., Sakka, S.: Design method for an anthropomorphic hand able to gesture and grasp. In: 2015 IEEE International Conference on Robotics and Automation (ICRA), Seattle, Washington (2015)Google Scholar
  8. 8.
    RongXingDa: Liquid Silicone Rubber for Food GradeMold RXSILICONE (2016). http://www.rtv-2.com/project/food-grade-silicone-rubber-for-mold-making. Accessed 12 Apr 2017
  9. 9.
    Silika: Silicona RTV Platino Silika Moldes e Insumos. http://silikamoldeseinsumos.com/productos/caucho-silicona-rtv-platino/. Accessed 17 Apr 2017
  10. 10.
    Oddo, M., Beccai, L., Wessberg, J., Backlund, H., Mattioli, F., Chiara, M.: Roughness encoding in human and biomimetic artificial touch: spatiotemporal frequency modulation and structural anisotropy of fingerprints. Sensors 11(6), 5596–5615 (2011)Google Scholar
  11. 11.
    Duvefelta, K., Olofssona, U., Johannessona, C., Skedungb, L.: Model for contact between finger and sinusoidal plane to evaluate adhesion and deformation component of frictio. Tribol. Int. 96, 289–394 (2016)CrossRefGoogle Scholar
  12. 12.
    Kargov, A., Pylatiuk, C., Martin, J., Schulz, S., Doderlein, L.: A comparison of the grip force distribution in natural hands and in prosthetic hands. Disabil. Rehabil. 26(12), 705–711 (2004)CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Renato Mio
    • 1
  • Marlene Bustamante
    • 1
  • Giancarlo Salazar
    • 1
  • Dante A. Elias
    • 1
    Email author
  1. 1.Laboratory of Biomechanics and Applied RoboticsPontificia Universidad Católica del PeruLimaPeru

Personalised recommendations