Advertisement

LCCT vs. LLC Converter - Analysis of Operational Characteristics During Critical Modes of Operation

  • Michal Pridala
  • Michal FrivaldskyEmail author
  • Pavol Spanik
Conference paper
Part of the Lecture Notes in Electrical Engineering book series (LNEE, volume 554)

Abstract

Following the invention of resonant power converters, lots of new topologies with significant improvements considering increase of efficiency and power density are arising. The main procedure how to optimize operational characteristics is through the modification of converter´s main circuit. In this paper, circuit topology of LLC resonant DC-DC converter and half-bridge LCCT resonant DC-DC converter are comparatively studied for target application, which is modular architecture of power supply. Simulation models of LLC and LCCT circuits are created using magnetic and thermal models of individual components using PLECS simulation software. Based on the circuit investigation within critical operational conditions, short-circuit and overload states are analysed, because of the selection procedure of the proper topology for the modular power supply system. For these purposes extended range of output power, flat characteristic of efficiency, and low ripple current and/or voltage will be necessary.

Keywords

Resonant converter Efficiency Redundancy Critical operation modes 

Notes

Acknowledgements

The authors wish to thank Slovak grant agency APVV for the project no. 0396-15 - Research of perspective high-frequency converter systems with GaN technology. Authors also would like to thank for the support from the national grant agency VEGA for the project no. 1/0479/17 – Research of the optimal methodologies for energy transfer within the systems with distributed storage systems.

References

  1. 1.
    Hu, Z., Qiu, Y., Wang, L., Liu, Y.F.: An interleaved LLC resonant converter operating at constant switching frequency. IEEE Trans. Power Electron. 29(6), 2931–2943 (2014)CrossRefGoogle Scholar
  2. 2.
    Prazenica, M., Dobrucky, B., Sekerak, P., Kalamen, L.: Design, modelling and simulation of two-phase two-stage electronic system with orthogonal output for supplying of two-phase ASM. Adv. Electr. Electron. Eng. 9(1), 56–64 (2011)Google Scholar
  3. 3.
    Chen, S.-M., Haung, Y.-H., Chung, Y.-Y., Hsieh, Y.-H., Liang, T.-J.: A novel interleaved LLC resonant converter. In: IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society, Vienna, pp. 293–297 (2013)Google Scholar
  4. 4.
    Wu, L.M., Chen, P.S.: Interleaved three-level LLC resonant converter with fixed-frequency PWM control. In: IEEE 36th International Telecommunications Energy Conference (INTELEC), Vancouver, pp. 1–8 (2014)Google Scholar
  5. 5.
    Nobile, G., Cacciato, M., Scarcella, G., Scelba, G.: Multi – criteria experimental comparison of batteries circuital models for automotive applications. Komunikácie/Commun. 1, 97–104 (2018). ISSN 2585-7878 (online), ISSN – 1335-4205 (print)Google Scholar
  6. 6.
    Dobrucky, B, Prazenica, M, Kascak, S, Kassa, J.: HF link LCTLC resonant converter with LF AC output. In: 38th Annual Conference on IEEE-Industrial-Electronics-Society (IECON), Canada, pp. 447–452 (2012). ISBN 978-1-4673-2421-2, ISSN 1553-572XGoogle Scholar
  7. 7.
    Dobrucky, B., Benova, M., Kascak, S.: Transient analysis and modelling of 2nd-and 4th-order LCLC filter under non-symmetrical control. Elektronika IE Elektrotechnika 111(5), 89–94 (2011)Google Scholar
  8. 8.
    Dudrik, J., Pastor, M., Lacko, M.: High-frequency soft-switching PWM DC-DC converter with active output rectifier operating as a current source for arc welding applications. Electric Power Compon. Syst. 45(6), 681–691 (2017)CrossRefGoogle Scholar
  9. 9.
    Kindl, V., Kavalir, T., Pechanek, R., Skala, B., Sobra, J.: Key construction aspects of resonant wireless low power transfer system. In: ELEKTRO 2014, Rajecké Teplice, pp. 303–306, 19–20 May 2014Google Scholar
  10. 10.
    Kindl, V., Kavalir, T., Pechanek, R., et al.: Basic operating characteristics of wireless power transfer system for small portable devices. In: 40th Annual Conference of the IEEE-Industrial-Electronics-Society (IECON), Dallas, TX, pp. 3819–3823, October 2014Google Scholar
  11. 11.
    Zaskalicky, P.: Modelling of a serial wound DC motor supplied by a semicontrolled rectifier. Adv. Electr. Electron. Eng. 5(1), 110–113 (2006)Google Scholar
  12. 12.
    Aiello, G., Cacciato, M., Messina, S., Torrisi, M.: A high efficiency interleaved PFC front-end converter for EV battery charger. Komunikácie/Commun. 1, 86–92 (2018). ISSN 2585-7878 (online), ISSN 1335-4205 (print)Google Scholar
  13. 13.
    Dobrucky, B., Benova, M., Abdalmula, M., Kascak, S.: Design analysis of LCTLC resonant inverter for two-stage 2-phase supply system. Automatika 54(3), 299–307 (2013). ISSN 0005-1144CrossRefGoogle Scholar
  14. 14.
    Chlebis, P., Tvrdon, M., Baresova, K., et al.: The system of fast charging station for electric vehicles with minimal impact on the electrical grid. Adv. Electr. Electron. Eng. 14(2), 89–94 (2016)Google Scholar
  15. 15.
    Tvrdon, M., Chlebis, P., Hromjak, M.: Design of power converters for renewable energy sources and electric vehicles charging. Adv. Electr. Electron. Eng. 11(3), 204–209 (2013)Google Scholar
  16. 16.
    Stepins, D., Huang, J.: Optimization of modulation waveforms for improved EMI attenuation in switching frequency modulated power converters. Adv. Electr. Electron. Eng. 13(1), 10–21 (2015)Google Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • Michal Pridala
    • 1
  • Michal Frivaldsky
    • 1
    Email author
  • Pavol Spanik
    • 1
  1. 1.University of ZilinaZilinaSlovakia

Personalised recommendations