Advertisement

Biorefinery pp 593-614 | Cite as

GINEXTRA®: A Small-Scale Multipurpose Modular and Integrated Biorefinery Technology

  • L. InfeliseEmail author
  • J. Kazimierczak
  • J. Wietecha
  • E. Kopania
Chapter

Abstract

The chapter presents GINEXTRA®, a small-scale multipurpose modular and integrated biorefinery technology. The GINEXTRA® technology allows extracting the intact fibre for the production of high-quality yarns, fabrics and garments from the stems of the Spartium junceum shrub, a botanical species found in the genus Genista, using a proprietary enzyme-retting cocktail. After extraction of textile quality fibres, two side streams are generated: post-maceration liquid (PML) and solid waste (shives and tows). The side streams’ valorisation is fundamental to ensure the competitiveness and sustainability of the GINEXTRA® technology. Besides the production of high-quality yarns, fabrics and garments, lignin, hemicelluloses and cellulose pulp were extracted from the solid waste and purified. The production costs at the lab scale were calculated for these side streams (lignin 0.35 euro/kg; cellulose and hemicellulose 0.60 euro/kg). Moreover, the lab research results showed that it is possible to use the PML as a component of culture medium in the biosynthesis of bacterial nanocellulose (BNC). It was also possible to reduce the cost of biosynthesis by 25% by reducing or eliminating the amount of individual medium components and to obtain BNC with a comparable or even up to 29% higher yield than the standard culture medium (calculated costs at lab scale, BNC 22 euro/m2).

The next round of research will concentrate on (1) combining in a single-step biorefinery plant both primitive fibre extraction and side stream processing and (2) reducing the ultimate energy and chemical requirements (by an estimate of 30%) for the full treatment of the lignocellulosic raw materials by combining mild thermochemical and thermomechanical technologies with enzyme applications.

Keywords

GINEXTRA® Spartium junceum Biorefinery Fibre Rural ecosystem valorisation 

References

  1. Angelini L, Ceccarini L (2003) Improving cultivation of Spartium junceum as new crop for natural fibres for automotive industry. In: Proceeding international South Europe symposium IENICA nonfoodcrops: from agriculture to industry, BolognaGoogle Scholar
  2. Angelini L, Macchia M, Ceccarini L, Bonari E (1998) Screening of kenaf (Hibiscus cannabinus L.) genotypes for low temperature requirements during germination and evaluation of feasibility of seed production in Italy. Field Crop Res 59:7379CrossRefGoogle Scholar
  3. Angelini L, Lazzeri A, Levita G, Fontanelli D, Bozzi C (1999) Physical and mechanical properties of Ramie (Boehmeria nivea Gaud.) and Spanish Broom (Spartium junceum) fibres for fibrereinforced composite materials. In: Proceeding fourth European symposium on industrial crops and products, 2325 March, Bonn, Germany, Edited by FNR Band 14, Gülzow, 787788Google Scholar
  4. Angelini L, Lazzeri A, Levita G, Fontanelli D, Bozzi C (2000) Ramie (Boehmeria nivea Gaud. L.) and Spanish Broom (Spartium junceum L.) fibres for composite materials: agronomical aspects, morphology and mechanical properties. Ind Crop Prod 11(2–3):145–161Google Scholar
  5. Bell J et al (2018) EU ambition to build the world’s leading bioeconomy—uncertain times demand innovative and sustainable solutions. New Biotechnol 40(Part A):25–30CrossRefGoogle Scholar
  6. Bommarius AS, Bommarius BR (2004) Biocatalysis: fundamentals and applications. Wiley-Blackwell, HobokenCrossRefGoogle Scholar
  7. Cannon RE, Anderson SM (1991) Biogenesis of bacterial cellulose. Crit Rev Microbiol 17:435–447CrossRefGoogle Scholar
  8. Ciechanska D (2004) Multifunctional bacterial cellulose/chitosan composite materials for medical applications. Fibres Text East Eur 12(4):69–72Google Scholar
  9. Ciechanska D, Struszczyk H, Kazimierczak J, Guzinska K, Pawlak M, Kozlowska E, Matusiak G, Dutkiewicz M (2002) New electro-acoustic transducers based on modified bacterial cellulose. Fibres Text East Eur 1(36):27–30Google Scholar
  10. Czaja W, Krystynowicz A, Bielecki S, Brown RM Jr (2006) Microbial cellulose—the natural power to heal wounds. Biomaterials 27(2):145–151CrossRefGoogle Scholar
  11. Dupont JI, Borg A (2018) Destination bioeconomy—the path towards a smarter, more sustainable future. New Biotechnol 40(Part A):140–143CrossRefGoogle Scholar
  12. Florea M, Hagemann H, Santosa G, Abbott J, Micklem CN, Spencer-Milnes X, de Arroyo GL, Paschou D, Lazenbatt C, Kong D, Chughtai H, Jensen K, Freemont PS, Kitney R, Reeve B, Ellis T (2016) Engineering control of bacterial cellulose production using a genetic toolkit and a new cellulose producing strain. PNAS 113(24):E3431–E3440.  https://doi.org/10.1073/pnas.1522985113CrossRefGoogle Scholar
  13. Bocardo Gerolamo (1880) Trattato teoretico-pratico di economia politica, vol 2. Economia pratica: produzione territoriale, industriale, commerciale; agricoltura, boschi, ... crisi, credito e banche (Classic Reprint)Google Scholar
  14. Global Bioeconomy Summit (2018) Global bioeconomy summit communiqué. In: Innovation in the global bioeconomy for sustainable and inclusive transformation and wellbeing, 19–20 April 2018, Berlin, GermanyGoogle Scholar
  15. Hestrin S, Schramm M (1954) Synthesis of cellulose by Acetobacter xylinum. Biochem J 58:345–352CrossRefGoogle Scholar
  16. Infelise L. (1998) Le Mans. Diagnosis/development of innovation potential in rural areas throughout innovative networking strategies. A critical appraisal of theoretical works and innovative experiencesGoogle Scholar
  17. Infelise L (2000) “Apprendere e cambiare in una comunità locale” (Learning and change in a local community). In: Amietta P (ed) I luoghi dell’apprendimento—metodi, strumenti e casi di eccellenza delle nuove formazioni. Franco Angeli, MilanGoogle Scholar
  18. Infelise L (2002) ALLIANCE—an alliance for the development of business and employment in rural areas: a community learning model. In: 42nd congress of the European regional science association, DortmundGoogle Scholar
  19. Infelise L (2003) ALLIANCE—an alliance for the development of business and employment in rural areas: a community learning model. In: Regional studies association—reinventing regions in the global economy gateway, 4—rural development and the new rural economy, Pisa, ItalyGoogle Scholar
  20. Infelise L (2006) Territoire anticipateur: «un être vivant » en apprentissage (An in-advance territory: a learning living being) in POUR, Paris, 192Google Scholar
  21. Infelise L (2007) Nuove relazioni tra approcci cognitivi ed economici, nuovi spazi e forme di democrazia partecipativa. Per una pedagogia del cambiamento in aree fragili (New relations between cognitive and economic approaches, new spaces and forms of partecipative democracy. for a pedagogy of changing in fragile areas). In: Del Don C (ed) La crisi dei confini. Verso un’ingegneria dello sviluppo regionale. Franco Angeli, MilanoGoogle Scholar
  22. Kazimierczak J, Wietecha J, Kopania E, Szadkowski M, Infelise L (2016) Utilization of post-maceration liquid from spartium junceum enzymatic retting in biosynthesis of bacterial nanocellulose. Fibres Text East Eur 24(6(120)):45–50CrossRefGoogle Scholar
  23. Kim SS, Lee SY, Park KJ, Park SM, An HJ, Hyun JM, Choi YH (2017) Gluconacetobacter sp. gel_SEA623-2, bacterial cellulose producing bacterium isolated from citrus fruit juice. Saudi J Biol Sci 24:314–319CrossRefGoogle Scholar
  24. Kopania E, Wiśniewska-Wrona M, Wietecha J (2014) Galactoglucomannans (GGMs) extracted from spruce sawdust for medical applications. Fibres Text East Eur 22(2(104)):29–34Google Scholar
  25. Kovačević Z, Bischof S, Vujasinović, Fan M (2016) The influence of pre-treatment of Spartium junceum L. fibres on the structure and mechanical properties of PLA biocomposites. Arab J ChemGoogle Scholar
  26. Krüger A, Schäfers C, Schröder C, Antranikian G (2018) Towards a sustainable bio-based industry—highlighting the impact of extremophiles. New Biotechnol 40:144–156CrossRefGoogle Scholar
  27. Pellis A, Cantone S, Ebert C, Gardossi L (2018) Evolving biocatalysis to meet bioeconomy challenges and opportunities. New Biotechnol 40:154–169CrossRefGoogle Scholar
  28. Piasecka-Zelga J, Zelga P, Szulc J, Wietecha J, Ciechańska D (2018) An in vivo biocompatibility study of surgical meshes made from bacterial cellulose modified with chitosan. Int J Biol Macromol 116:1119–1127.  https://doi.org/10.1016/j.ijbiomac.2018.05.123CrossRefGoogle Scholar
  29. Pichat CA (1858) Chapter 725: Institutions of agricultural sciences and technology, collection in Book XXGoogle Scholar
  30. Puls J , Poutanen K , Körner HU, Viikari L (1985) Biotechnical utilization of wood carbohydrates after steaming pretreatment. Appl Microbiol Biotechnol 22:416–423Google Scholar
  31. Savorgnan D’Osoppo MA (1891) Coltivazione ed industria delle piante tessili. (Manual on the cultivation and industrial exploitation of textile plants). Hoepli, MilanoGoogle Scholar
  32. Shi Z, Zhang Y, Phillips GO, Yang G (2014) Utilization of bacterial cellulose in food. Food Hydrocoll 35:539–545CrossRefGoogle Scholar
  33. Wanichapichart P, Kaewnopparat S, Buaking K, Puthai W (2002) Characterization of cellulose membranes produced by Acetobacter xylinum. Songklanakarin J Sci Technol 24, 855(Suppl):–862. Membrane Sci. &TechGoogle Scholar
  34. Werpy T, Petersen G (2004) Top value added chemicals from biomass, vol I: results of screening for potential candidates from sugars and synthesis gas. U.S. Department of Energy ReportGoogle Scholar
  35. Yeo SH, Lee OS, Lee IS, Kim HS, Yu TS, Jeong YJ (2004) Gluconacetobacterpersimmonis sp. nov., isolated from Korean traditional persimmon vinegar. J Microbiol Biotechnol 14:276–293Google Scholar
  36. Yoshino T, Asakura T, Toda K (1996) Cellulose production by Acetobacter pasteurianus on silicone membrane. J Ferment Bioeng 91:32–36CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • L. Infelise
    • 1
    Email author
  • J. Kazimierczak
    • 2
  • J. Wietecha
    • 2
  • E. Kopania
    • 2
  1. 1.ARTES_Innovation for Sustainable GrowthBolognaItaly
  2. 2.Institute of Biopolymers and Chemical FibresŁódźPoland

Personalised recommendations