Advertisement

Inspection Models for Technical Systems

  • Sylwia Werbińska-WojciechowskaEmail author
Chapter
Part of the Springer Series in Reliability Engineering book series (RELIABILITY)

Abstract

The objective of this chapter is to present a literature review on inspection maintenance modelling issues. The discussed maintenance models are classified into two main groups—form single- and multi-unit systems. For single-unit systems the reviewed research works include such modelling issues like optimum and nearly optimum inspection policies, shock occurrence, information uncertainty, sequential inspection, multi-state objects, or imperfect inspection performance. The classification also includes optimality criterion, planning horizon, and used modelling method. The maintenance models for multi-unit systems regard to the two types of technical objects—protective devices (or standby units) and operational units. The main extensions of the developed models are discussed and summarized. Moreover, the main development directions in inspection maintenance modelling are presented in a graphical form. The brief summary of the conducted literature review is provided with indicating the main research gaps in this modelling area.

References

  1. 1.
    Abdel-Hameed M (1995) Inspection, maintenance and replacement models. Comput Oper Res 22(4):435–441.  https://doi.org/10.1016/0305-0548(94)00051-9CrossRefzbMATHGoogle Scholar
  2. 2.
    Abdel-Hameed M (1987) Inspection and maintenance policies of devices subject to deterioration. Adv Appl Probab 19(4):917–931MathSciNetzbMATHCrossRefGoogle Scholar
  3. 3.
    Ahmadi A, Kumar U (2011) Cost based risk analysis to identify inspection and restoration intervals of hidden failures subject to aging. IEEE Trans Reliab 60(1):197–209.  https://doi.org/10.1109/TR.2011.2104530CrossRefGoogle Scholar
  4. 4.
    Alfares H (1999) A simulation model for determining inspection frequency. Comput Ind Eng 36:685–696.  https://doi.org/10.1016/S0360-8352(99)00159-XCrossRefGoogle Scholar
  5. 5.
    Ali SA, Bagchi G (1998) Risk-informed in service inspection. Nucl Eng Des 181:221–224CrossRefGoogle Scholar
  6. 6.
    Angelo BP, Grazia GM, Rosaria VM (2008) Optimized planning and scheduling of pressure equipment inspections at COMAH establishments. J KONBiN 3(6):127–136CrossRefGoogle Scholar
  7. 7.
    Anily S, Glass CA, Hassin R (1998) The scheduling of maintenance service. Discrete Appl Math 82(1–3):27–42.  https://doi.org/10.1016/S0166-218X(97)00119-4MathSciNetCrossRefzbMATHGoogle Scholar
  8. 8.
    Aoki K, Yamamoto K, Kobayashi K (2007) Optimal inspection and replacement policy using stochastic method for deterioration prediction. In: Proceedings of 11th world conference on transport research, Berkeley, CA, pp 1–13Google Scholar
  9. 9.
    Aven T (1987) Optimal inspection and replacement of a coherent system. Microelectron Reliab 27(3):447–450.  https://doi.org/10.1016/0026-2714(87)90460-4CrossRefGoogle Scholar
  10. 10.
    Aven T (1984) Optimal inspection when the system is repaired upon detection of failure. Microelectron Reliab 24(5):961–963CrossRefGoogle Scholar
  11. 11.
    Azadeh A, Sangari MS, Amiri AS (2012) A particle swarm algorithm for inspection optimization in serial multi-stage process. Appl Math Model 36:1455–1464.  https://doi.org/10.1016/j.apm.2011.09.037MathSciNetCrossRefzbMATHGoogle Scholar
  12. 12.
    Babishin V, Taghipour S (2016) Joint optimal maintenance and inspection for a k-out-of-n system. Int J Adv Manuf Technol 87(5):1739–1749.  https://doi.org/10.1109/RAMS.2016.7448039CrossRefGoogle Scholar
  13. 13.
    Badia FG, Berrade MD (2006) Optimal inspection of a system with two types of failures under age dependent minimal repair. Monogr Semin Mat Garcia Galdeano 33:207–214MathSciNetzbMATHGoogle Scholar
  14. 14.
    Badia FG, Berrade MD (2006) Optimum maintenance of a system under two types of failure. Int J Mater Struct Reliab 4(1):27–37Google Scholar
  15. 15.
    Badia FG, Berrade MD, Campos CA (2002) Optimal inspection and preventive maintenance of units with revealed and unrevealed failures. Reliab Eng Syst Saf 78:157–163CrossRefGoogle Scholar
  16. 16.
    Badia FG, Berrade MD, Campos CA (2002) Maintenance policy for multivariate standby/operating units. Appl Stoch Model Bus Ind 18:147–155MathSciNetzbMATHCrossRefGoogle Scholar
  17. 17.
    Badia FG, Berrade MD, Campos CA (2001) Optimization of inspection intervals based on cost. J Appl Probab 38(4):872–881MathSciNetzbMATHCrossRefGoogle Scholar
  18. 18.
    Bai Y, Bai Q (2014) Subsea pipeline integrity and risk management. Elsevier.  https://doi.org/10.1016/C2011-0-00113-8
  19. 19.
    Bai Y, Jin W-L (2015) Marine structural design. ElsevierGoogle Scholar
  20. 20.
    Ballou DP, Pazer HL (1982) The impact of inspector fallibility on the inspection policy in serial production systems. Manage Sci 28(4):387–399.  https://doi.org/10.1287/mnsc.28.4.387CrossRefGoogle Scholar
  21. 21.
    Barcentewicz J, Miller J (1978) Chosen issues connected with diagnostics and reliability of technical systems (in Polish). In: Proceedings of winter school on reliability, Center for Technical Progress, Katowice, pp 89–106Google Scholar
  22. 22.
    Barlow RE, Hunter LC, Proschan F (1963) Optimum checking procedures. J Soc Ind Appl Math 11(4):1078–1095. https://www.jstor.org/stable/2946496MathSciNetzbMATHCrossRefGoogle Scholar
  23. 23.
    Becker G, Camarinopoulos L, Ziouas G (1994) A Markov type model for systems with tolerable down times. J Oper Res Soc 45(10):1168–1178.  https://doi.org/10.2307/2584479CrossRefzbMATHGoogle Scholar
  24. 24.
    Beichelt F (1981) Minimax inspection strategies for single unit systems. Nav Res Logist Q 28(3):375–381MathSciNetzbMATHCrossRefGoogle Scholar
  25. 25.
    Berrade MD (2012) A two-phase inspection policy with imperfect testing. Appl Math Model 36:108–114.  https://doi.org/10.1016/j.apm.2011.05.035CrossRefzbMATHGoogle Scholar
  26. 26.
    Berrade MD, Cavalcante CAV, Scarf PA (2013) Modelling imperfect inspection over a finite horizon. Reliab Eng Syst Saf 111:18–29.  https://doi.org/10.1016/j.ress.2012.10.003CrossRefGoogle Scholar
  27. 27.
    Berrade MD, Cavalcante CAV, Scarf PA (2012) Maintenance scheduling of a protection system subject to imperfect inspection and replacement. Eur J Oper Res 218:716–725.  https://doi.org/10.1016/j.ejor.2011.12.003MathSciNetCrossRefzbMATHGoogle Scholar
  28. 28.
    Berrade MD, Scarf PA, Cavalcante CAV, Dwight RA (2013) Imperfect inspection and replacement of a system with a defective state: a cost and reliability analysis. Reliab Eng Syst Saf 120:80–87.  https://doi.org/10.1016/j.ress.2013.02.024CrossRefGoogle Scholar
  29. 29.
    Będkowski L, Dabrowski T (2010) Functional diagnosing as the basis for safety of operating systems (in Polish). In: Proceedings of XXXVIII winter school on reliability—risk of technical systems operation and maintenance performance, Publishing House of Institute for Sustainable Technologies, Radom, Szczyrk, pp 5–15Google Scholar
  30. 30.
    Będkowski L, Dabrowski T (2007) Active in increasing the reliability of operational processes (in Polish). In: Proceedings of XXXV winter school on reliability—problems of systems’ dependability, Publishing House of Institute for Sustainable Technologies, Radom, Szczyrk, pp 71–83Google Scholar
  31. 31.
    Będkowski L, Dabrowski T (2002) Diagnostic and reliability inference based on the potential characteristics of a repairable system (in Polish). In: Proceedings of XXX winter school on reliability—systems dependability, Publishing House of Institute for Sustainable Technologies, Radom, Szczyrk, pp 42–51Google Scholar
  32. 32.
    Będkowski L, Dabrowski T (2002) Diagnostic and reliability inference based on the potential characteristics of a non-repairable system (in Polish). In: Proceedings of XXX winter school on reliability—systems dependability, Publishing House of Institute for Sustainable Technologies, Radom, Szczyrk, pp 30–41Google Scholar
  33. 33.
    Będkowski L, Dabrowski T (1990) Cyclic diagnosing supporting by computer system (in Polish). In: Proceedings of winter school on reliability, Centre for Technical Progress, Katowice, pp 19–25Google Scholar
  34. 34.
    Bhatti J, Chitkara AK, Kakkar MK (2016) Stochastic analysis of dis-similar standby system with discrete failure, inspection and replacement policy. Demonstratio Math 49(2):224–235MathSciNetzbMATHGoogle Scholar
  35. 35.
    Bjarnason ETS, Taghipour S (2014) Optimizing simultaneously inspection interval and inventory levels (s, S) for a k-out-of-n system. In: 2014 Reliability and maintainability symposium, Colorado Springs, CO, pp 1–6.  https://doi.org/10.1109/rams.2014.6798463
  36. 36.
    Bjarnason ETS, Taghipour S, Banjevic D (2014) Joint optimal inspection and inventory for a k-out-of-n system. Reliab Eng Syst Saf 131:203–215.  https://doi.org/10.1016/j.ress.2014.06.018CrossRefGoogle Scholar
  37. 37.
    Bobrowski D (1980) Optimisation of technical object maintenance with inspections (in Polish). In: Proceedings of winter school on reliability, Center for Technical Progress, Katowice, pp 31–46Google Scholar
  38. 38.
    Boland PJ, El-Neweihi E (1995) Expected cost comparisons for inspection and repair policies. Comput Oper Res 22(4):383–390.  https://doi.org/10.1016/0305-0548(94)00047-CCrossRefzbMATHGoogle Scholar
  39. 39.
    Borowczyk H, Lindsted P, Magier J (2011) A complex diagnosis based on technical condition index (in Polish). Maint Probl 2:33–41Google Scholar
  40. 40.
    Bris R, Chatelet E, Yalaoui F (2003) New method to minimize the preventive maintenance cost of series-parallel systems. Reliab Eng Syst Saf 82:247–255.  https://doi.org/10.1016/S0951-8320(03)00166-2CrossRefGoogle Scholar
  41. 41.
    Bukowski JV (2001) Modeling and analyzing the effects of periodic inspection on the performance of safety-critical systems. IEEE Trans Reliab 50(3):321–329.  https://doi.org/10.1109/24.974130CrossRefGoogle Scholar
  42. 42.
    Butler DA (1979) A hazardous-inspection model. Manage Sci 25(1):79–89zbMATHCrossRefGoogle Scholar
  43. 43.
    Canty MJ, Rothenstein D, Avenhaus R (2001) Timely inspection and deterrence. Eur J Oper Res 131:208–223.  https://doi.org/10.1016/S0377-2217(00)00082-5MathSciNetCrossRefzbMATHGoogle Scholar
  44. 44.
    Carvalho M, Nunes E, Telhada J (2009) Optimal periodic inspection of series systems with revealed and unrevealed failures. In: Safety, reliability and risk analysis: theory, methods and applications—proceedings of the joint ESREL and SRA-Europe conference, CRC Press, pp 587–592Google Scholar
  45. 45.
    Cazorla DM, Perez-Ocon R (2008) An LDQBD process under degradation, inspection, and two types of repair. Eur J Oper Res 190:494–508.  https://doi.org/10.1016/j.ejor.2007.04.056MathSciNetCrossRefzbMATHGoogle Scholar
  46. 46.
    Chelbi A, Ait-Kadi D (2009) Inspection strategies for randomly failing systems. In: Ben-Daya M, Duffuaa SO, Raouf A, Knezevic J, Ait-Kadi D (eds) Handbook of maintenance management and engineering. Springer, LondonzbMATHGoogle Scholar
  47. 47.
    Chelbi A, Ait-Kadi D (2000) Generalized inspection strategy for randomly failing systems subjected to random shocks. Int J Prod Econ 64:379–384.  https://doi.org/10.1016/S0925-5273(99)00073-0CrossRefGoogle Scholar
  48. 48.
    Chelbi A, Ait-Kadi D (1998) Inspection and predictive maintenance strategies. Int J Comput Integr Manuf 11(3):226–231.  https://doi.org/10.1080/095119298130750CrossRefGoogle Scholar
  49. 49.
    Chelbi A, Ait-Kadi D, Aloui H (2008) Optimal inspection and preventive maintenance policy for systems with self-announcing and non-self-announcing failures. J Qual Maint Eng 14(1):34–45.  https://doi.org/10.1108/13552510810861923CrossRefGoogle Scholar
  50. 50.
    Chen Ch-T, Chen Y-W, Yuan J (2003) On dynamic preventive maintenance policy for a system under inspection. Reliab Eng Syst Saf 80:41–47.  https://doi.org/10.1016/S0951-8320(02)00238-7CrossRefGoogle Scholar
  51. 51.
    Chen Y-Ch (2013) An optimal production and inspection strategy with preventive maintenance error and rework. J Manuf Syst 32:99–106.  https://doi.org/10.1016/j.jmsy.2012.07.010CrossRefGoogle Scholar
  52. 52.
    Cheng GQ, Li L (2012) A geometric process repair model with inspections and its optimisation. Int J Syst Sci 43(9):1650–1655.  https://doi.org/10.1080/00207721.2010.549586MathSciNetCrossRefzbMATHGoogle Scholar
  53. 53.
    Cheng Z, Yang Z, Tan L, Guo B (2011) Optimal inspection and maintenance policy for the multi-unit series system. In: Proceedings of 9th international conference on reliability, maintainability and safety (ICRMS) 2011, Guiyang, 12–15 June 2011, pp 811–814Google Scholar
  54. 54.
    Chiang JH, Yuan J (2001) Optimal maintenance policy for a Markovian system under periodic inspection. Reliab Eng Syst Saf 71:165–172.  https://doi.org/10.1016/S0951-8320(00)00093-4CrossRefGoogle Scholar
  55. 55.
    Cho ID, Parlar M (1991) A survey of maintenance models for multi-unit systems. Eur J Oper Res 51(1):1–23CrossRefGoogle Scholar
  56. 56.
    Choi KM (1997) Semi-Markov and delay time models of maintenance. PhD thesis, University of Salford, UKGoogle Scholar
  57. 57.
    Chung K-J (1995) Optimal test-times for intermittent faults. IEEE Trans Reliab 44(4):645–647CrossRefGoogle Scholar
  58. 58.
    Cui L, Xie M (2005) Availability of a periodically inspected system with random repair or replacement times. J Stat Plan Inference 131:89–100.  https://doi.org/10.1016/j.jspi.2003.12.008MathSciNetCrossRefzbMATHGoogle Scholar
  59. 59.
    Cui L, Xie M (2001) Availability analysis of periodically inspected systems with random walk model. J Appl Probab 38:860–871.  https://doi.org/10.1017/S0021900200019082MathSciNetCrossRefzbMATHGoogle Scholar
  60. 60.
    Cui L, Xie M, Loh H-T (2004) Inspection schemes for general systems. IIE Trans 36:817–825.  https://doi.org/10.1080/07408170490473006CrossRefGoogle Scholar
  61. 61.
    Dagg RA, Newby M (1998) Optimal overhaul intervals with imperfect inspection and repair. IMA J Math Appl Bus Ind 9:381–391zbMATHGoogle Scholar
  62. 62.
    Darwish MA, Ben-Daya M (2007) Effect of inspection errors and preventive maintenance on a two-stage production inventory system. Int J Prod Econ 107:301–313.  https://doi.org/10.1016/j.ijpe.2006.09.008CrossRefGoogle Scholar
  63. 63.
    Dąbrowski T, Bednarek M (2012) Reliability of threshold-comparative diagnosis processes (in Polish). In: Proceedings of XL winter school on reliability—dependability of processes and technical systems, Publishing House of Institute for Sustainable Technologies, Radom, pp 1–23Google Scholar
  64. 64.
    Dąbrowski T, Bedkowski L (2010) The diagnosing and supervising of the state of an object during exploitation (in Polish). Maint Probl 2:7–15Google Scholar
  65. 65.
    Delia M-C, Rafael P-O (2008) A maintenance model with failures and inspection following Markovian arrival processes and two repair modes. Eur J Oper Res 186:694–707.  https://doi.org/10.1016/j.ejor.2007.02.009MathSciNetCrossRefzbMATHGoogle Scholar
  66. 66.
    Dieulle L (2002) Reliability of several component sets with inspections at random times. Eur J Oper Res 139:96–114MathSciNetzbMATHCrossRefGoogle Scholar
  67. 67.
    Dieulle L (1999) Reliability of a system with Poisson inspection times. J Appl Probab 36(4):1140–1154MathSciNetzbMATHCrossRefGoogle Scholar
  68. 68.
    Dohi T, Kaio N, Osaki S (2003) Preventive maintenance models: replacement, repair, ordering, and inspection. In: Pham H (ed) Handbook of reliability engineering. Springer-Verlag, London, pp 349–366CrossRefGoogle Scholar
  69. 69.
    Duer S (2011) Diagnostic information renewal basis of complex technical objects. J KONBiN 2(18):5–14Google Scholar
  70. 70.
    Duffuaa S, Al-Najjar HJ (1995) An optimal complete inspection plan for critical multicharacteristic components. J Oper Res Soc 46(8):930–942zbMATHCrossRefGoogle Scholar
  71. 71.
    Duffuaa S, El-Ga’aly A (2013) A multi-objective mathematical optimization model for process targeting using 100% inspection policy. Appl Math Model 37:1545–1552.  https://doi.org/10.1016/j.apm.2012.04.008MathSciNetCrossRefzbMATHGoogle Scholar
  72. 72.
    Duffuaa S, Khan M (2008) A general repeat inspection plan for dependent multicharacteristic critical components. Eur J Oper Res 191:374–385.  https://doi.org/10.1016/j.ejor.2007.02.033MathSciNetCrossRefzbMATHGoogle Scholar
  73. 73.
    Duffuaa S, Khan M (2002) An optimal repeat inspection plan with several classifications. J Oper Res Soc 53(9):1016–1026.  https://doi.org/10.1057/palgrave.jors.2601392CrossRefzbMATHGoogle Scholar
  74. 74.
    Durango-Cohen PL, Madanat SM (2008) Optimization of inspection and maintenance decisions for infrastructure facilities under performance model uncertainty: a quasi-Bayes approach. Transp Res Part A Policy Pract 42(8):1074–1085.  https://doi.org/10.1016/j.tra.2008.03.004CrossRefGoogle Scholar
  75. 75.
    Dzwigarek M, Hryniewicz O (2012) Periodical inspection frequency of protection systems of machinery—case studies (in Polish). J KONBiN 3(23):109–120CrossRefGoogle Scholar
  76. 76.
    Dzwigarek M, Hryniewicz O (2011) Frequency of periodical inspections of safety-related control systems of machinery—practical recommendations for determining methods. In: Proceedings of summer safety and reliability seminars, SSARS 2011, Gdańsk-Sopot, Poland, 03–09 July 2011, pp 17–26Google Scholar
  77. 77.
    Ellingwood BR, Mori Y (1997) Reliability-based service life assessment of concrete structures in nuclear power plants: optimum inspection and repair. Nucl Eng Des 175:247–258CrossRefGoogle Scholar
  78. 78.
    Estes AC, Frangopol DM (2000) An optimized lifetime reliability-based inspection program for deteriorating structures. In: Proceedings of the 8th ASCE joint specialty conference on probabilistic mechanics and structural reliability, Notre Dame, INGoogle Scholar
  79. 79.
    Faber MH, Sorensen JD (2002) Indicators for inspection and maintenance planning of concrete structures. Struct Saf 24:377–396.  https://doi.org/10.1016/S0167-4730(02)00033-4CrossRefGoogle Scholar
  80. 80.
    Feng Q, Peng H, Coit DW (2010) A degradation-based model for joint optimization of burn-in, quality inspection, and maintenance: a light display device application. Int J Adv Manuf Technol 50:801–808.  https://doi.org/10.1007/s00170-010-2532-7CrossRefGoogle Scholar
  81. 81.
    Fung J, Makis V (1997) An inspection model with generally distributed restoration and repair times. Microelectron Reliab 37(3):381–389CrossRefGoogle Scholar
  82. 82.
    Garnero M-A, Beaudouin F, Delbos J-P (1998) Optimization of bearing-inspection intervals. In: IEEE proceedings of annual reliability and maintainability symposium, pp 332–338Google Scholar
  83. 83.
    Girtler J (2012) Possibility of application of the theory of semi-Markov processes to determine reliability of diagnosing systems. J KONBiN 4(24):49–58CrossRefGoogle Scholar
  84. 84.
    Godziszewski J (2001) The impact of errors of the first and second types made during inspections on the costs of maintenance of a homogeneous equipment park (in Polish). In: Proceedings of XIX winter school on reliability—computer aided dependability analysis, Publishing House of Institute for Sustainable Technologies, Radom, pp 89–100Google Scholar
  85. 85.
    Gravito FM, Dos Santos Filho N (2003) Inspection and maintenance of wooden poles structures. In: Global ESMO 2003, Orlando, Florida, pp 151–155Google Scholar
  86. 86.
    Greenberg H (1964) Optimum test procedure under stress. Oper Res 12(5):689–692MathSciNetCrossRefGoogle Scholar
  87. 87.
    Gulati R, Kahn J, Baldwin R (2010) The professional’s guide to maintenance and reliability terminology. Reliabilityweb.comGoogle Scholar
  88. 88.
    Guo H, Szidarovszky F, Gerokostopoulos A, Niu P (2015) On determining optimal inspection interval for minimizing maintenance cost. In: Proceedings of 2015 annual reliability and maintainability symposium (RAMS), IEEE, pp 1–7Google Scholar
  89. 89.
    Hagemeijer PM, Kerkveld G (1998) A methodology for risk-based inspection of pressurized systems. Proc Inst Mech Eng E J Process Mech Eng 212(1):37–47CrossRefGoogle Scholar
  90. 90.
    Hagemeijer PM, Kerkveld G (1998) Application of risk-based inspection for pressurized HC production systems in a Brunei petroleum company. Proc Inst Mech Eng E J Process Mech Eng 212(1):49–54CrossRefGoogle Scholar
  91. 91.
    Hariga MA (1996) A maintenance inspection model for a single machine with general failure distribution. Microelectron Reliab 36(3):353–358CrossRefGoogle Scholar
  92. 92.
    Hryniewicz O (2009) Optimal inspection intervals for maintainable equipment. In: Martorell S, Guedes-Soares C, Barnett J (eds) Safety, reliability and risk analysis: theory, methods and applications. Taylor and Francis Group, LondonGoogle Scholar
  93. 93.
    Hu T, Wei Y (2001) Multivariate stochastic comparisons of inspection and repair policies. Stat Probab Lett 51:315–324MathSciNetzbMATHCrossRefGoogle Scholar
  94. 94.
    Huang J, Song Y, Ren Y, Gao Q (2014) An optimization method of aircraft periodic inspection and maintenance based on the zero-failure data analysis. In: Proceedings of 2014 IEEE Chinese guidance, navigation and control conference, Yantai, China, 8–10 August 2014, pp 319–323Google Scholar
  95. 95.
    Ito K, Nakagawa T (2000) Optimal inspection policies for a storage system with degradation at periodic tests. Math Comput Model 31:191–195MathSciNetzbMATHCrossRefGoogle Scholar
  96. 96.
    Ito K, Nakagawa T (1995) An optimal inspection policy for a storage system with high reliability. Microelectron Reliab 36(6):875–882CrossRefGoogle Scholar
  97. 97.
    Ito K, Nakagawa T (1995) An optimal inspection policy for a storage system with three types of hazard rate functions. J Oper Res Soc Jpn 38(4):423–431MathSciNetzbMATHCrossRefGoogle Scholar
  98. 98.
    Ito K, Nakagawa T, Nishi K (1995) Extended optimal inspection policies for a system in storage. Math Comput Model 22(10–12):83–87MathSciNetzbMATHCrossRefGoogle Scholar
  99. 99.
    Jazwinski J, Borgon J, Ważyńska-Fiok K (1988) Algorithm of technical objects’ maintenance modernisation (in Polish). In: Proceedings of winter school on reliability, Center for Technical Progress, Katowice, pp 129–150Google Scholar
  100. 100.
    Jazwinski J, Sypnik R (1978) Role of diagnostics in technical systems dependability determining (in Polish). In: Proceedings of winter school on reliability, Center for Technical Progress, Katowice, pp 25–40Google Scholar
  101. 101.
    Jazwinski J, Zurek J (2000) Principles of determining the maintenance set of the condition of the transport system with the use of expert opinions (in Polish). In: Proceedings of XXVIII winter school on reliability—decision problems in dependability engineering, Publishing House of Institute for Sustainable Technologies, Radom, Szczyrk, pp 118–125Google Scholar
  102. 102.
    Jiang R, Jardine AKS (2005) Two optimization models of the optimum inspection problem. J Oper Res Soc 56(10):1176–1183.  https://doi.org/10.1057/palgrave.jors.2601885CrossRefzbMATHGoogle Scholar
  103. 103.
    Jorgenson DW, Mccall JJ (1963) Optimal scheduling of replacement and inspection. Oper Res 11(5):732–746MathSciNetzbMATHCrossRefGoogle Scholar
  104. 104.
    Jovanovic A (2003) Risk-based inspection and maintenance in power and process plants in Europe. Nucl Eng Des 226:165–182CrossRefGoogle Scholar
  105. 105.
    Kaio N, Osaki S (1989) Comparison of inspection policies. J Oper Res Soc 40(5):499–503zbMATHCrossRefGoogle Scholar
  106. 106.
    Kaio N, Osaki S (1988) Inspection policies: comparisons and modifications. Revenue française d’automatique, d’informatique et de recherché opérationnelle. Rech Opér 22(4):387–400Google Scholar
  107. 107.
    Kallen MJ, Van Noortwijk JM (2006) Optimal periodic inspection of a deterioration process with sequential condition states. Int J Press Vessels Pip 83:249–255.  https://doi.org/10.1016/j.ijpvp.2006.02.007CrossRefGoogle Scholar
  108. 108.
    Kallen MJ, Van Noortwijk JM (2005) Optimal maintenance decisions under imperfect inspection. Reliab Eng Syst Saf 90:177–185.  https://doi.org/10.1016/j.ress.2004.10.004CrossRefGoogle Scholar
  109. 109.
    Kawai H, Koyanagi J (1992) An optimal maintenance policy of a discrete time Markovian deterioration system. Comput Math Appl 24(1/2):103–108MathSciNetzbMATHCrossRefGoogle Scholar
  110. 110.
    Keller JB (1982) Optimum inspection policies. Manage Sci 28(4):447–450Google Scholar
  111. 111.
    Kenzin M, Frostig E (2009) M out of n inspected systems subject to shocks in random environment. Reliab Eng Syst Saf 94:1322–1330.  https://doi.org/10.1016/j.ress.2009.02.005CrossRefzbMATHGoogle Scholar
  112. 112.
    Kharoufer JP, Finkelstein DE, Mixon DG (2006) Availability of periodically inspected systems with Markovian wear and shocks. J Appl Probab 43(2):303–317.  https://doi.org/10.1239/jap/1152413724MathSciNetCrossRefzbMATHGoogle Scholar
  113. 113.
    Kishan R, Jain D (2012) A two non-identical unit standby system model with repair, inspection and post-repair under classical and Bayesian viewpoints. J Reliab Stat Stud 5(2):85–103Google Scholar
  114. 114.
    Klatzky RL, Messick DM, Loftus J (1992) Heuristics for determining the optimal interval between checkups. Psychol Sci 3(5):279–284CrossRefGoogle Scholar
  115. 115.
    Klein M (1962) Inspection-maintenance-replacement schedules under Markovian deterioration. Manage Sci 9(1):25–32CrossRefGoogle Scholar
  116. 116.
    Klutke G-A, Yang Y (2002) The availability of inspected systems subject to shocks and graceful degradation. IEEE Trans Reliab 51(3):371–374CrossRefGoogle Scholar
  117. 117.
    Kong MB, Park KS (1997) Optimal replacement of an item subject to cumulative damage under periodic inspections. Microelectron Reliab 37(3):467–472CrossRefGoogle Scholar
  118. 118.
    Kumar J (2011) Cost-benefit analysis of a redundant system with inspection and priority subject to degradation. IJCSI Int J Comput Sci Issues 8(6/2):314–321Google Scholar
  119. 119.
    Lam CT, Yeh RH (1994) Optimal maintenance-policies for deteriorating systems under various maintenance strategies. IEEE Trans Reliab 43(3):423–430CrossRefGoogle Scholar
  120. 120.
    Lam CT, Yeh RH (1994) Comparison of sequential and continuous inspection strategies for deteriorating systems. Adv Appl Probab 26(2):423–435MathSciNetzbMATHCrossRefGoogle Scholar
  121. 121.
    Lam JYJ, Banjevic D (2015) A myopic policy for optimal inspection scheduling for condition based maintenance. Reliab Eng Syst Saf 144:1–11.  https://doi.org/10.1016/j.ress.2015.06.009CrossRefGoogle Scholar
  122. 122.
    Landowski B, Woropay M (2003) Simulation of exploitation processes of technical objects preventively maintained (in Polish). In: Proceedings of XXXI winter school on reliability—forecasting methods in dependability engineering, Publishing House of Institute for Sustainable Technologies, Radom, pp 297–308Google Scholar
  123. 123.
    Le MD, Tan ChM (2013) Optimal maintenance strategy of deteriorating system under imperfect maintenance and inspection using mixed inspection scheduling. Reliab Eng Syst Saf 113:21–29.  https://doi.org/10.1016/j.ress.2012.11.025CrossRefGoogle Scholar
  124. 124.
    Lee BL, Wang M (2012) Approximately optimal testing policy for two-unit parallel standby systems. Int J Appl Sci Eng 10(3):263–272Google Scholar
  125. 125.
    Lee C (1999) Applications of delay time theory to maintenance practice of complex plant. PhD thesis, University of Salford, UKGoogle Scholar
  126. 126.
    Lee HL, Rosenblatt MJ (1987) Simultaneous determination of production cycle and inspection schedules in a production systems. Manage Sci 33(9):1125–1136zbMATHCrossRefGoogle Scholar
  127. 127.
    Leung FKN (2001) Inspection schedules when the lifetime distribution of a single-unit system is completely unknown. Eur J Oper Res 132:106–115.  https://doi.org/10.1016/S0377-2217(00)00115-6MathSciNetCrossRefzbMATHGoogle Scholar
  128. 128.
    Liu B, Zhao X, Yeh R-H, Kuo W (2016) Imperfect inspection policy for systems with multiple correlated degradation processes. IFAC-PapersOnLine 49–12:1377–1382CrossRefGoogle Scholar
  129. 129.
    Lu Z Chen M, Zhou D (2015) Periodic inspection maintenance policy with a general repair for multi-state systems. In: Proceedings of Chinese automation congress (CAC), 27–29 Nov 2015, pp 2116–2121Google Scholar
  130. 130.
    Luss H (1976) Maintenance policies when deterioration can be observed by inspections. Oper Res Int Journal 24(2):359–366MathSciNetzbMATHGoogle Scholar
  131. 131.
    Luss H, Kander Z (1974) Inspection policies when duration of checkings is non-negligible. Oper Res Q 25(2):299–309zbMATHCrossRefGoogle Scholar
  132. 132.
    Magott J, Nowakowski T, Skrobanek P, Werbinska-Wojciechowska S (2010) Logistic system modeling using fault trees with time dependencies—example of tram network. In: Bris R, Guedes Soares C, Martorell S (eds) Reliability, risk and safety: theory and applications, vol 3. Taylor & Francis, London, pp 2293–2300Google Scholar
  133. 133.
    Mahmoud MAW, Mohie El-Din MM, El-Said Moshref M (1995) Reliability analysis of a two-unit cold standby system with inspection, replacement, proviso of rest, two types of repair and preparation time. Microelectron Reliab 35(7):1063–1072CrossRefGoogle Scholar
  134. 134.
    Martinez EC (1984) Storage reliability with periodic test. In: IEEE proceedings of annual reliability and maintainability symposium, pp 181–185Google Scholar
  135. 135.
    Mazumdar M (1970) Reliability of two-unit redundant repairable systems when failures are revealed by inspections. SIAM J Appl Math 19(4):637–647MathSciNetzbMATHCrossRefGoogle Scholar
  136. 136.
    Mccall JJ (1963) Operating characteristics of opportunistic replacement and inspection policies. Manage Sci 10(1):85–97CrossRefGoogle Scholar
  137. 137.
    Mendes AA, Coit DW, Duarte Ribeiro JL (2014) Establishment of the optimal time interval between periodic inspections for redundant systems. Reliab Eng Syst Saf 131:148–165.  https://doi.org/10.1016/j.ress.2014.06.021CrossRefGoogle Scholar
  138. 138.
    Meyer RR, Rothkopf MH, Smith SA (1979) Reliability and inventory in a production-storage system. Manage Sci 25(8):799–807zbMATHCrossRefGoogle Scholar
  139. 139.
    Mok JI, Seong PH (1996) Optimal inspection and replacement periods of the safety system in Wolsung nuclear power plant unit 1 with an optimized cost perspective. Ann Nucl Energy 23(2):87–97CrossRefGoogle Scholar
  140. 140.
    Munford AG (1981) Comparison among certain inspection policies. Manage Sci 27(3):260–267zbMATHCrossRefGoogle Scholar
  141. 141.
    Munford AG, Shahani AK (1973) An inspection policy for the Weibull case. Oper Res Q 24(3):453–458CrossRefGoogle Scholar
  142. 142.
    Munford AG, Shahani AK (1972) A nearly optimal inspection policy. Oper Res Q 23(3):373–379zbMATHCrossRefGoogle Scholar
  143. 143.
    Nakagawa T (2014) Random maintenance policies. Springer-Verlag, LondonCrossRefGoogle Scholar
  144. 144.
    Nakagawa T (2005) Maintenance theory of reliability. SpringerGoogle Scholar
  145. 145.
    Nakagawa T (2003) Maintenance and optimum policy. In: Pham H (ed) Handbook of reliability engineering. Springer-Verlag, London, pp 397–414Google Scholar
  146. 146.
    Nakagawa T (1980) Optimum inspection policies for a standby unit. J Oper Res Soc Jpn 23(1):13–26MathSciNetzbMATHCrossRefGoogle Scholar
  147. 147.
    Nakagawa T (1980) Replacement models with inspection and preventive maintenance. Microelectron Reliab 20:427–433CrossRefGoogle Scholar
  148. 148.
    Nakagawa T, Mizutani S, Chen M (2010) A summary of periodic and random inspection policies. Reliab Eng Syst Saf 95:906–911.  https://doi.org/10.1016/j.ress.2010.03.012CrossRefGoogle Scholar
  149. 149.
    Nakagawa T, Yasui K (1980) Approximate calculation of optimal inspection times. J Oper Res Soc 31:851–853zbMATHCrossRefGoogle Scholar
  150. 150.
    Neves ML, Santiago LP, Maia CA (2011) A condition-based maintenance policy and input parameters estimation for deteriorating systems under periodic inspection. Comput Ind Eng 61:503–511.  https://doi.org/10.1016/j.cie.2011.04.005CrossRefGoogle Scholar
  151. 151.
    Nizizski S (1990) Diagnostic systems of mechanical vehicles (in Polish). In: Proceedings of winter school on reliability, OPT, Katowice, pp 143–155Google Scholar
  152. 152.
    Ohnishi M, Kawai H, Mine H (1986) An optimal inspection and replacement policy under incomplete state of information. Eur J Oper Res 27:117–128MathSciNetzbMATHCrossRefGoogle Scholar
  153. 153.
    Ohnishi M, Kawai H, Mine H (1986) An optimal inspection and replacement policy for a deteriorating system. J Appl Probab 23(4):973–988MathSciNetzbMATHCrossRefGoogle Scholar
  154. 154.
    Okumura S (2006) Determination of inspection schedules of equipment by variational method. Math Probl Eng, Article ID 95843:1–16. Hindawi Publishing CorporationGoogle Scholar
  155. 155.
    Onoufriou T, Frangopol DM (2002) Reliability-based inspection optimization of complex structures: a brief retrospective. Comput Struct 80:1133–1144CrossRefGoogle Scholar
  156. 156.
    Osaki S (ed) (2002) Stochastic models in reliability and maintenance. Springer-Verlang, BerlinzbMATHGoogle Scholar
  157. 157.
    Osaki S, Asakura T (1970) A two-unit standby redundant system with repair and preventive maintenance. J Appl Probab 7(3):641–648MathSciNetzbMATHCrossRefGoogle Scholar
  158. 158.
    Panagiotidou S (2014) Joint optimization of spare parts ordering and maintenance policies for multiple identical items subject to silent failures. Eur J Oper Res 235:300–314.  https://doi.org/10.1016/j.ejor.2013.10.065MathSciNetCrossRefzbMATHGoogle Scholar
  159. 159.
    Pandey D, Tyagi SK, Jacob M (1995) Profit evaluation of a two-unit system with internal and external repairs, inspection and post repair. Microelectron Reliab 35(2):259–264CrossRefGoogle Scholar
  160. 160.
    Parmigiani G (1993) Optimal inspection and replacement policies with age-dependent failures and fallible tests. J Oper Res Soc 44(11):1105–1114zbMATHCrossRefGoogle Scholar
  161. 161.
    Parmigiani G (1993) Optimal scheduling of fallible inspections. DP no. 92-38:1–30. https://stat.duke.edu/research/papers/1992-38. Accessed on 17 Oct 2018
  162. 162.
    Parmigiani G (1991) Scheduling inspections in reliability. Institute of Statistics and Decision Sciences Discussion Paper no. 92-A11:1–21. https://stat.duke.edu/research/papers/1992-11. Accessed on 17 Oct 2018
  163. 163.
    Pascual R, Louit D, Jardine AKS (2011) Optimal inspection intervals for safety systems with partial inspections. J Oper Res Soc 2(1):2051–2062.  https://doi.org/10.1057/jors.2010.173CrossRefGoogle Scholar
  164. 164.
    Peters R (2014) Reliable, maintenance planning, estimating, and scheduling. Gulf Professional PublishingGoogle Scholar
  165. 165.
    Pierskalla WP, Voelker JA (1976) A survey of maintenance models: the control and surveillance of deteriorating systems. Nav Res Logist Q 23:353–388MathSciNetzbMATHCrossRefGoogle Scholar
  166. 166.
    PN-EN 60300-3-11:2010 (2010) Dependability management, application guide—reliability centred maintenance. The Polish Committee for Standardization, WarsawGoogle Scholar
  167. 167.
    Podofillini L, Zio E, Vatn J (2006) Risk-informed optimisation of railway tracks inspection and maintenance procedures. Reliab Eng Syst Saf 91:20–35.  https://doi.org/10.1016/j.ress.2004.11.009CrossRefGoogle Scholar
  168. 168.
    Qiu Y (1991) A note on optimal inspection policy for stochastically deteriorating series systems. J Appl Probab 28:934–939MathSciNetzbMATHCrossRefGoogle Scholar
  169. 169.
    Radner R, Jorgenson DW (1962) Optimal replacement and inspection of stochastically failing equipment. In: Arrow KJ, Karlin S, Scarf H (eds) Studies in applied probability and management science. Stanford University Press, pp 184–206Google Scholar
  170. 170.
    Rausand M, Hoyland A (2004) System reliability theory: models, statistical methods, and applications. Wiley, New YorkzbMATHGoogle Scholar
  171. 171.
    Rezaei E (2017) A new model for the optimization of periodic inspection intervals with failure interaction: A case study for a turbine rotor. Case Stud Eng Fail Anal 9:148–156.  https://doi.org/10.1016/j.csefa.2015.10.001CrossRefGoogle Scholar
  172. 172.
    Rizwan SM, Chauhan H, Taneja G (2005) Stochastic analysis of systems with accident and inspection. Emir J Eng Res 10(2):81–88Google Scholar
  173. 173.
    Rosenfield D (1976) Markovian deterioration with uncertain information. Oper Res 24(1):141–155MathSciNetzbMATHCrossRefGoogle Scholar
  174. 174.
    Sahraoui Y, Khelif R, Chateauneuf A (2013) Maintenance planning under imperfect inspections of corroded pipelines. Int J Press Vessels Pip 104:76–82.  https://doi.org/10.1016/j.ijpvp.2013.01.009CrossRefGoogle Scholar
  175. 175.
    Salamonowicz T (2007) Maintenance strategy for systems in k-out-of-n reliability structure (in Polish). In: Proceedings of XXXV winter school on reliability—problems of systems dependability, Publishing House of Institute for Sustainable Technologies, Radom, pp 414–420Google Scholar
  176. 176.
    Sandoh H, Igaki N (2003) Optimal inspection policies for a scale. Comput Math Appl 46:1119–1127MathSciNetzbMATHCrossRefGoogle Scholar
  177. 177.
    Sandoh H, Igaki N (2001) Inspection policies for a scale. J Qual Maint Eng 7(3):220–231zbMATHCrossRefGoogle Scholar
  178. 178.
    Sarkar J, Sarkar S (2000) Availability of a periodically inspected system under perfect repair. J Stat Plan Inference 91:77–90MathSciNetzbMATHCrossRefGoogle Scholar
  179. 179.
    Scarf PA, Cavalcante CAV (2012) Modelling quality in replacement and inspection maintenance. Int J Prod Econ 135:372–381.  https://doi.org/10.1016/j.ijpe.2011.08.011CrossRefGoogle Scholar
  180. 180.
    Schultz CR (1985) A note on computing periodic inspection policies. Manage Sci 31(12):1592–1596CrossRefGoogle Scholar
  181. 181.
    Senegupta B (1982) An exponential riddle. J Appl Probab 19(3):737–740MathSciNetCrossRefGoogle Scholar
  182. 182.
    Sheils E, O’connor A, Breysse D, Schoefs F, Yotte S (2010) Development of a two-stage inspection process for the assessment of deteriorating infrastructure. Reliab Eng Syst Saf 95:182–194.  https://doi.org/10.1016/j.ress.2009.09.008CrossRefGoogle Scholar
  183. 183.
    Sheriff YS (1982) Reliability analysis: optimal inspection & maintenance schedules of failing equipment. Microelectron Reliab 22(1):59–115CrossRefGoogle Scholar
  184. 184.
    Sheu S-H (1999) Extended optimal replacement model for deteriorating systems. Eur J Oper Res 112:503–516zbMATHCrossRefGoogle Scholar
  185. 185.
    Sheu S-H, Tsai H-N, Wang F-K, Zhang ZG (2015) An extended optimal replacement model for a deteriorating system with inspections. Reliab Eng Syst Saf 139:33–49.  https://doi.org/10.1016/j.ress.2015.01.014CrossRefGoogle Scholar
  186. 186.
    Srivastava MS, Wu Y (1993) Estimation and testing in an imperfect-inspection model. IEEE Trans Reliab 42(2):280–286zbMATHCrossRefGoogle Scholar
  187. 187.
    Su Ch, Zhang Y-J, Cao B-X (2012) Forecast model for real time reliability of storage system based on periodic inspection and maintenance data. Eksploat Niezawodn Maint Reliab 14(4):342–348Google Scholar
  188. 188.
    Tadikamalla PR (1979) An inspection policy for the gamma failure distributions. J Oper Res Soc 30(1):77–80MathSciNetzbMATHCrossRefGoogle Scholar
  189. 189.
    Taghipour S, Banjevic D (2012) Optimum inspection interval for a system under periodic and opportunistic inspections. IIEE Trans 44:932–948.  https://doi.org/10.1080/0740817X.2011.618176CrossRefzbMATHGoogle Scholar
  190. 190.
    Taghipour S, Banjevic D (2012) Optimal inspection of a complex system subject to periodic and opportunistic inspections and preventive replacements. Eur J Oper Res 220:649–660.  https://doi.org/10.1016/j.ejor.2012.02.002MathSciNetCrossRefzbMATHGoogle Scholar
  191. 191.
    Tang T (2012) Failure finding interval optimization for periodically inspected repairable systems. PhD. Thesis, University of TorontoGoogle Scholar
  192. 192.
    Tang T, Lin D, Banjevic D, Jardine AKS (2013) Availability of a system subject to hidden failure inspected at constant intervals with non-negligible downtime due to inspection and downtime due to repair/replacement. J Stat Plan Inference 143:176–185.  https://doi.org/10.1016/j.jspi.2012.05.011MathSciNetCrossRefzbMATHGoogle Scholar
  193. 193.
    Ten Wolde M, Ghobbar AA (2013) Optimizing inspection intervals—reliability and availability in terms of a cost model: a case study on railway carriers. Reliab Eng Syst Saf 114:137–147.  https://doi.org/10.1016/j.ress.2012.12.013CrossRefGoogle Scholar
  194. 194.
    Thomas LC, Gaver DP, Jacobs PA (1991) Inspection models and their application. IMA J Math Appl Bus Ind 3:283–303Google Scholar
  195. 195.
    Thomas LC, Jacobs PA, Gaver DP (1984) Inspection policies for stand-by systems. Technical report AD-A-141719/5; NPS-55-84-004, Naval Postgraduate School, Monterey, CA (USA)Google Scholar
  196. 196.
    Tijms HC, Van Der Duyn Schouten FA (1984) A Markov decision algorithm for optimal inspections and revisions in a maintenance system with partial information. Eur J Oper Res 21:245–253MathSciNetzbMATHCrossRefGoogle Scholar
  197. 197.
    Tirkel I (2016) Efficiency of inspection based on out of control detection in wafer fabrication. Comput Ind Eng 99:458–464.  https://doi.org/10.1016/j.cie.2016.05.022CrossRefGoogle Scholar
  198. 198.
    Tolentino D, Ruiz SE (2014) Influence of structural deterioration over time on the optimal time interval for inspection and maintenance of structures. Eng Struct 61:22–30.  https://doi.org/10.1016/j.engstruct.2014.01.012CrossRefGoogle Scholar
  199. 199.
    Tsai H-N, Sheu S-H, Zhang ZG (2016) A trivariate optimal replacement policy for a deteriorating system based on cumulative damage and inspections. Reliab Eng Syst Saf 160:122–135.  https://doi.org/10.1016/j.ress.2016.10.031CrossRefGoogle Scholar
  200. 200.
    Tylicki H, Zoltowski B (2012) Use of a dedicated diagnostic system in recognizing the condition of machines (in Polish). In: Proceedings of XL winter school on reliability, Publishing House of Institute for Sustainable Technologies, Radom, Szczyrk, pp 1–10Google Scholar
  201. 201.
    Valdez-Flores C, Feldman R (1989) A survey of preventive maintenance models for stochastically deteriorating single-unit systems. Nav Res Logist 36:419–446MathSciNetzbMATHCrossRefGoogle Scholar
  202. 202.
    Vaurio JK (1999) Availability and cost functions for periodically inspected preventively maintained units. Reliab Eng Syst Saf 63:133–140.  https://doi.org/10.1016/S0951-8320(98)00030-1CrossRefGoogle Scholar
  203. 203.
    Vaurio JK (1997) On time-dependent availability and maintenance optimization of standby units under various maintenance policies. Reliab Eng Syst Saf 56:79–89.  https://doi.org/10.1016/S0951-8320(96)00132-9CrossRefGoogle Scholar
  204. 204.
    Vaurio JK (1995) Unavailability analysis of periodically tested standby components. IEEE Trans Reliab 44(3):512–522.  https://doi.org/10.1109/24.406594CrossRefGoogle Scholar
  205. 205.
    Viscolani B (1991) A note on checking schedules with finite horizon. Oper Res 25(2):203–208.  https://doi.org/10.1051/ro/1991250202031MathSciNetCrossRefzbMATHGoogle Scholar
  206. 206.
    Wang GJ, Zhang YL (2014) Geometric process model for a system with inspections and preventive repair. Comput Ind Eng 75:13–19.  https://doi.org/10.1016/j.cie.2014.06.007CrossRefGoogle Scholar
  207. 207.
    Wang J, Matellini B, Wall A, Phipps J (2012) Risk-based verification of large offshore systems. Proc Inst Mech Eng M J Eng Marit Environ 226(3):273–298.  https://doi.org/10.1177/1475090211430302CrossRefGoogle Scholar
  208. 208.
    Wang W, Zhao F, Peng R (2014) A preventive maintenance model with a two-level inspection policy based on a three-stage failure process. Reliab Eng Syst Saf 121:207–220.  https://doi.org/10.1016/j.ress.2013.08.007CrossRefGoogle Scholar
  209. 209.
    Wattanapanom N, Shaw L (1979) Optimal inspection schedules for failure detection in a model where tests hasten failures. Oper Res 27(2):303–317zbMATHCrossRefGoogle Scholar
  210. 210.
    Weiss GH (1963) Optimal periodic inspection programs for randomly failing equipment. J Res Natl Bur Stan B Math Math Phys 67B(4):223–228MathSciNetzbMATHCrossRefGoogle Scholar
  211. 211.
    Weiss GH (1962) A problem in equipment maintenance. Manage Sci 8(3):266–277MathSciNetzbMATHCrossRefGoogle Scholar
  212. 212.
    White ChC III (1978) Optimal inspection and repair of a production process subject to deterioration. J Oper Res Soc 29(3):235–243MathSciNetzbMATHCrossRefGoogle Scholar
  213. 213.
    Wojdak J, Kostrzewa Z (1978) Diagnostic methods of selected machines’ assemblies with regard to measurement technique (in Polish). In: Proceedings of winter school on reliability, Center for Technical Progress, Katowice, pp 165–184Google Scholar
  214. 214.
    Woodcock K (2014) Model of safety inspection. Saf Sci 62:145–156CrossRefGoogle Scholar
  215. 215.
    Wortman MA, Klutke G-A, Ayhan A (1994) A maintenance strategy for systems subjected to deterioration governed by random shocks. IEEE Trans Reliab 43(3):439–445CrossRefGoogle Scholar
  216. 216.
    Yang J, Gang T, Zhao Y (2013) Availability of a periodically inspected system maintained through several minimal repairs before a replacement of a perfect repair. Abstr Appl Anal, Article ID 741275:1–6. Hindawi Publishing CorporationGoogle Scholar
  217. 217.
    Yang Y, Klutke G-A (2000) Improved inspection schemes for deteriorating equipment. Probab Eng Inform Sci 14(4):445–460MathSciNetzbMATHCrossRefGoogle Scholar
  218. 218.
    Yeh L (2003) An inspection-repair-replacement model for a deteriorating system with unobservable state. J Appl Probab 40:1031–1042MathSciNetzbMATHCrossRefGoogle Scholar
  219. 219.
    Yeh L (1995) An optimal inspection-repair-replacement policy for standby systems. J Appl Probab 32(1):212–223MathSciNetzbMATHCrossRefGoogle Scholar
  220. 220.
    Yeh RH (1996) Optimal inspection and replacement policies for multi-state deteriorating systems. Eur J Oper Res 96:248–259zbMATHCrossRefGoogle Scholar
  221. 221.
    Yeh RH, Chen HD, Wang C-H (2005) An inspection model with discount factor for products having Weibull lifetime. Int J Oper Res 2(1):77–81MathSciNetzbMATHGoogle Scholar
  222. 222.
    You J-S, Kuo H-T, Wu W-F (2006) Case studies of risk-informed inservice inspection of nuclear piping systems. Nucl Eng Des 236:35–46CrossRefGoogle Scholar
  223. 223.
    Zequeira RI, Berenguer C (2006) Optimal scheduling of non-perfect inspections. IMA J Manage Math 17:187–207.  https://doi.org/10.1093/imaman/dpi037MathSciNetCrossRefzbMATHGoogle Scholar
  224. 224.
    Zequeira RI, Berenguer C (2006) An inspection and imperfect maintenance model for a system with two competing failure modes. In: Proceedings of the 6th IFAC symposium: supervision and safety of technical processes, pp 932–937CrossRefGoogle Scholar
  225. 225.
    Zequeira RI, Berenguer C (2005) On the inspection policy of a two-component parallel system with failure interaction. Reliab Eng Syst Saf 88:99–107.  https://doi.org/10.1016/j.ress.2004.07.009CrossRefGoogle Scholar
  226. 226.
    Zhang J, Huang X, Fang Y, Zhou J, Zhang H, Li J (2016) Optimal inspection-based preventive maintenance policy for three-state mechanical components under competing failure modes. Reliab Eng Syst Saf 152:95–103.  https://doi.org/10.1016/j.ress.2016.02.007CrossRefGoogle Scholar
  227. 227.
    Zhao F, Xu X, Xie SQ (2009) Computer-aided inspection planning—the state of the art. Comput Ind 60:453–466.  https://doi.org/10.1016/j.compind.2009.02.002CrossRefGoogle Scholar
  228. 228.
    Zhao X, Chen M, Nakagawa T (2014) Optimal time and random inspection policies for computer systems. Appl Math Inform Sci 8(1L):413–417Google Scholar
  229. 229.
    Zhaoyang T, Jianfeng L, Zongzhi W, Jianhu Z, Weifeng H (2011) An evaluation of maintenance strategy using risk based inspection. Saf Sci 49:852–860.  https://doi.org/10.1016/j.ssci.2011.01.015CrossRefGoogle Scholar
  230. 230.
    Zuckerman D (1989) Optimal inspection policy for a multi-unit machine. J Appl Probab 26:543–551MathSciNetzbMATHCrossRefGoogle Scholar
  231. 231.
    Zuckerman D (1980) Inspection and replacement policies. J Appl Probab 17(1):168–177MathSciNetzbMATHCrossRefGoogle Scholar
  232. 232.
    Żoltowski B (2012) Improvement of machines’ exploitation systems (in Polish). Maint Probl 2:7–20Google Scholar
  233. 233.
    Żoltowski B (2011) Fundamentals of diagnosing machines (in Polish). Publ. House of UTP University of Science and Technology, BydgoszczGoogle Scholar
  234. 234.
    Żoltowski B (2011) Systems safety in the aspect of diagnostics (in Polish). Napędy Sterowanie 4:82–89Google Scholar
  235. 235.
    Żoltowski B, Zoltowski M (2011) Improvement of equipment maintenance strategy (in Polish). J KONBiN 4(20):119–132CrossRefGoogle Scholar
  236. 236.
    Żoltowski B, Kalaczynski T (2011) Searching for the ways of machines rational maintenance (in Polish). Stud Proc Polish Assoc Knowl Manage 48:162–175Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Wroclaw University of Science and TechnologyWroclawPoland

Personalised recommendations