Device Characterizations and Chromatic Dispersion Measurement in Optical Fibres
- 144 Downloads
This chapter presents the measurement results obtained from the experiments that have been discussed in the previous chapter. The critical parameters such as wavelength, frequency and DC biasing voltage give different results based on assigned values. External modulator response also limits the dynamic range of these parameters. Since the effect of each parameter on dispersion can be studied separately, in each section of this chapter, each variable parameter will be measured, while the other parameter was made constant. In addition, analysis of multiple critical measurements will be presented to relate the experiment result with the theory.
- 2.R. Madabhushi, A study of an antenna coupled optical Y branch and its application, Doctorate thesis for Doctor of Electronics Engineering, Tohoku University, Sendai, Japan, (1989)Google Scholar
- 3.K. Kawano, T. Nozawa, M. Yanagibashi, H. Jumoji, Broad band and low driving power LiNbO3 external optical modulators. NTT Rev. 1, 103–113 (1989)Google Scholar
- 5.M. Seino, N. Mekada, T. Namiki, and H. Nakajima, 33-GHz-cm broadband Ti: LiNbO3 Mach-Zehnder modulator, in Proc. ECOC, Paper ThB22–5. (1989), pp. 433–435Google Scholar