Advertisement

Classification of Boriding Techniques

  • Michal Kulka
Chapter
Part of the Engineering Materials book series (ENG.MAT.)

Abstract

The simplified classification of the techniques of boriding was presented in this chapter. The two main groups of the methods were indicated: chemical techniques and physical techniques regarding the technological aspects of boriding process. Such a classification was based on how to produce the active atoms or ions of boron, which might be adsorbed on the surface of metal alloys and could diffuse into the substrate. The most intensively developed techniques were put in the boxes drawn in a broken line, indicating the current trends in boriding.

References

  1. Burakowski T, Wierzchoń T (1999) Surface engineering of metals: principles, equipment, technologies. CRC Press, Boca Raton, London, New York, Washington D.C. ISBN 9780849382253Google Scholar
  2. Krukovich MG, Prusakov BA, Sizov IG (2016) Plasticity of boronized layers. Springer International Publishing, Switzerland. ISBN 978-3-319-40012-9CrossRefGoogle Scholar
  3. Minkevich AN (1965) Khimiko-termicheskaya obrabotka metallov i splavov. Mashinostroenie, MoskvaGoogle Scholar
  4. Przybyłowicz K (2000) Teoria i praktyka borowania stali (Theory and practice of steel boronizing). Publishing House of Kielce University of Technology, Kielce in Polish PL ISSN 0239-4979Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Institute of Materials Science and EngineeringPoznań University of TechnologyPoznańPoland

Personalised recommendations