Advertisement

High-Temperature Online Reforming of Converter Gas with Coke Oven Gas

  • Binglang Ren
  • Lin Lin
  • Jingsong WangEmail author
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

A large amount of by-product gas containing abundant physical heat and excessive quantity of carbon dioxide (CO2) is generated during the iron and steel production. Through the high-temperature online reforming of the by-product gas with coke oven gas, generated physical heat and CO2 can be completely utilized to achieve efficient use of energy and reduction of CO2 emission, respectively, and high-quality chemical synthesis gas can be acquired simultaneously. The thermodynamic behavior of the reforming of converter gas with coke oven gas was analyzed based on Gibbs energy minimization method. The thermodynamic calculation model was proposed and utilized to describe the effect of temperature, pressure, and ratio of converter gas to coke oven gas on conversion rate of CO2 and methane (CH4) and ratio of H2 to CO of the product gas. High temperature and low pressure were found to be the favorable thermodynamic condition for reforming process. Ratio of H2 to CO of product gas was significantly influenced by initial composition of reactant gases. Moreover, the reforming reaction was investigated by performing the mixed reforming experiments under the condition of high temperature to provide theoretical and experimental basis for the realization of industrialization.

Keywords

Converter gas Coke oven gas High-temperature reforming 

References

  1. 1.
    Zhang Z (2014) Energy planning and energy saving technology in iron and steel enterprises. Metallurgy Industry Press, Beijing, ChinaGoogle Scholar
  2. 2.
    Chen LG, Yang B, Shen X, Xie ZH, Sun FR (2015) Thermodynamic optimization opportunities for the recovery and utilization of residual energy and heat in China steel industry: a case study. Appl Therm Eng 86:151–160CrossRefGoogle Scholar
  3. 3.
    Sun W, Cai J, Zhu Y (2013) Advances in energy conservation of China steel industry. Sci World J 2:1–7Google Scholar
  4. 4.
    Hasanbeigi A, Price L, Aden N, Li X, Shangguan F (2011) A comparison of iron and steel production energy use and energy intensity in China and the U.S. Berkeley. Lawrence Berkeley National LaboratoryGoogle Scholar
  5. 5.
    Zeng S, Lan Y, Huang J (2009) Mitigation paths for Chinese iron and steel industry to tackle global climate change. Int J Greenhouse Gas Control 3:675–682CrossRefGoogle Scholar
  6. 6.
    Chen W, Yin X, Ma D (2014) A bottom-up analysis of China’s iron and steel industrial energy consumption and CO2 emissions. Appl Energy 136:1174–1183CrossRefGoogle Scholar
  7. 7.
    Duan W, Yu Q, Xie H, Qin Q, Zuo Z (2014) Thermodynamic analysis of hydrogen-rich gas generation from coal steam gasification using blast furnace slag as heat carrier. Int J Hydrog Energy 39:11611–11619CrossRefGoogle Scholar
  8. 8.
    Maruoka N, Mizuochi T, Purwanto H, Akiyama T (2004) Feasibility study for recovering waste heat in the steelmaking industry using a chemical recuperator. ISIJ Int 22(2):257–262CrossRefGoogle Scholar
  9. 9.
    Enger BC, Lødeng R, Holmen A (2008) A review of catalytic partial oxidation of methane to synthesis gas with emphasis on reaction mechanisms over transition metal catalysts. Appl Catal A 346(1):1–27CrossRefGoogle Scholar
  10. 10.
    Nematollahi B, Rezaei M et al (2012) Thermodynamic analysis of combined reforming process using Gibbs energy minimization method: in view of solid carbon formation. J Energy Chem 21(6):694–702CrossRefGoogle Scholar
  11. 11.
    Atashi H, Gholizadeh J, Tabrizi FF et al (2016) Thermodynamic analysis of carbon dioxide reforming of methane to syngas with statistical methods. Int J Hydrogen Energy 39:11611–11619Google Scholar
  12. 12.
    Levy M, Levitan R, Rosin H (1993) Solar energy storage via a closed-loop chemical heat pipe. Sol Energy 50(2):179–189CrossRefGoogle Scholar
  13. 13.
    Chen L, Shen X, Xia S et al (2017) Thermodynamic analyses for recovering residual heat of high-temperature basic oxygen gas (BOG) by the methane reforming with carbon dioxide reaction. Energy 118:906–913CrossRefGoogle Scholar
  14. 14.
    Rui Z, Ji H, Lin YS (2011) Modeling and analysis of ceramic–carbonate dual-phase membrane reactor for carbon dioxide reforming with methane. Int J Hydrogen Energy 36(14):8292–8300CrossRefGoogle Scholar
  15. 15.
    Tsipouriari VA, Verykios XE (2001) Kinetic study of the catalytic reforming of methane with carbon dioxide to synthesis gas over Ni/La2O3 catalyst. Catal Today 64:83–90CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  1. 1.State Key Laboratory of Advanced MetallurgyUniversity of Science and Technology BeijingBeijingPeople’s Republic of China
  2. 2.School of Energy and Environmental EngineeringUniversity of Science and Technology BeijingBeijingPeople’s Republic of China

Personalised recommendations