Advertisement

Distribution Behaviour of Metals in Copper Alloy Under Super-Gravity Field

  • Long Meng
  • Zhe Wang
  • Yiwei Zhong
  • Kuiyuan Chen
  • Zhancheng GuoEmail author
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

In the present study, the influences of super-gravity field with different cooling rates on the distribution behaviour and the morphology of metallic elements of Cu alloy were investigated. The Cu alloy was obtained from waste printed circuit boards by super-gravity separation, and it contained precious and common metals. The different solubilities of metallic elements in liquid and solid phases lead to component segregation during solidification of alloys. The results showed that super-gravity technology can enrich and distribute metallic elements in the Cu alloy according to different densities, and low cooling rate was favourable for the precipitation and enrichment of metals in the Cu alloy. When the cooling rate was 2 °C/min, Fe was enriched in the top of the Cu alloy, while Pb and Sn were enriched in the bottom of the alloy. The precious metals were combined with Pb and Sn, and they were enriched with segregation of Pb and Sn.

Keywords

Copper alloy Super-gravity field Metal Distribution Enrichment 

Notes

Acknowledgements

This work was financially supported by the project of National Natural Science Foundation of China (Grant No. 51704022).

References

  1. 1.
    Cayumil R, Khanna R, Rajarao R, Mukherjee PS, Sahajwalla V (2015) Concentration of precious metals during their recovery from electronic waste. Waste Manage 57:121–130CrossRefGoogle Scholar
  2. 2.
    Cui J, Roven HJ (2011) Electronic waste. Waste 281–296Google Scholar
  3. 3.
    Kogan V (2006) Recovery of precious metals from electronic scrap by hydrometallurgical processing. WOGoogle Scholar
  4. 4.
    Schluep M (2009) Recycling: from E-waste to resourcesGoogle Scholar
  5. 5.
    Park YJ, Fray DJ (2009) Recovery of high purity precious metals from printed circuit boards. J Hazard Mater 164:1152–1158CrossRefGoogle Scholar
  6. 6.
    Alzate A, López ME, Serna C (2016) Recovery of gold from waste electrical and electronic equipment (WEEE) using ammonium persulfate. Waste Manage 57:113–120CrossRefGoogle Scholar
  7. 7.
    Sahin M, Akcil A, Erust C, Altynbek S, Gahan CS, Tuncuk A (2015) A potential alternative for precious metal recovery from E-waste: iodine leaching. Sep Sci Technol 50:2587–2595Google Scholar
  8. 8.
    Li JY, Xu XL, Liu WQ (2012) Thiourea leaching gold and silver from the printed circuit boards of waste mobile phones. Waste Manage 32:1209–1212CrossRefGoogle Scholar
  9. 9.
    Joda NN, Rashchi F (2012) Recovery of ultra fine grained silver and copper from PC board scraps. Sep Purif Technol 92:36–42CrossRefGoogle Scholar
  10. 10.
    Fogarasi S, Imre-Lucaci F, Imre-Lucaci Á, Ilea P (2014) Copper recovery and gold enrichment from waste printed circuit boards by mediated electrochemical oxidation. J Hazard Mater 273:215–221CrossRefGoogle Scholar
  11. 11.
    Li JC, Guo ZC, Gao JT (2014) Isothermal enriching perovskite phase from CaO-TiO2-SiO2-Al2O3-MgO melt by super gravity. ISIJ Int 54:743–749CrossRefGoogle Scholar
  12. 12.
    Li JC, Guo ZC (2014) Innovative methodology to enrich britholite (Ca3Ce2[(Si, P)O4]3F) phase from rare-earth-rich slag by super gravity. Metall Mater Trans B 45:1272–1280CrossRefGoogle Scholar
  13. 13.
    Rahimipour MR, Sobhani M (2013) Evaluation of centrifugal casting process parameters for in situ fabricated functionally gradient Fe-TiC composite. Metall Mater Trans B 44:1120–1123CrossRefGoogle Scholar
  14. 14.
    Xie Y, Liu C, Zhai Y, Wang K, Ling X (2009) Centrifugal casting processes of manufacturing in situ functionally gradient composite materials of Al-19Si-5 Mg alloy. Rare Met 28:405–411CrossRefGoogle Scholar
  15. 15.
    Cambiella A, Benito JM, Pazos C, Coca J (2006) Centrifugal separation efficiency in the treatment of waste emulsified oils. Chem Eng Res Des 84:69–76CrossRefGoogle Scholar
  16. 16.
    Meng L, Wang Z, Zhong YW, Guo L, Gao JT, Chen KY, Cheng HJ, Guo ZC (2017) Supergravity separation for recovering metals from waste printed circuit boards. Chem Eng J 326:540–550CrossRefGoogle Scholar
  17. 17.
    Li JW, Guo ZC, Tang HQ, Wang Z, Sun ST (2012) Si purification by solidification of Al–Si melt with super gravity. Trans Nonferrous Met Soc China 22:958–963CrossRefGoogle Scholar
  18. 18.
    Zhao LX, Guo ZC, Wang Z, Wang MY (2010) Removal of low-content impurities from Al by super-gravity. Metall Mater Trans B 41:505–508CrossRefGoogle Scholar
  19. 19.
    Meng L, Gao JT, Zhong YW, Wang Z, Chen KY, Guo ZC (2018) Supergravity separation for recovering Pb and Sn from electronic waste. Sep Purif Technol 191:375–383CrossRefGoogle Scholar
  20. 20.
    Meng L, Zhong YW, Wang Z, Chen KY, Guo ZC (2018) High-temperature centrifugal separation of Cu from waste printed circuit boards. J Clean Prod 199:831–839CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  • Long Meng
    • 1
  • Zhe Wang
    • 1
  • Yiwei Zhong
    • 1
  • Kuiyuan Chen
    • 1
  • Zhancheng Guo
    • 1
    Email author
  1. 1.State Key Laboratory of Advanced MetallurgyUniversity of Science and Technology BeijingBeijingPeople’s Republic of China

Personalised recommendations