Advertisement

Application of Offgas Analysis on Predicting Carbon Content at End Point During Steelmaking Process

  • Rong Cheng
  • Jiongming ZhangEmail author
  • Liangjin Zhang
  • Haitao Ma
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

Using gas analysis to predict the carbon content at the end point is a new technology within steelmaking. The offgas data of a 100 ton BOF during steelmaking were analysed. The changing rules of the CO, CO2 and O2 volume fractions in the offgas played an important role in judging the status of decarburization in the converter during steelmaking. The carbon deposition reaction error, the CO2 dissolution in the west dedusting and the added CO2 from air into offgas had little influence on the predicted carbon content. The carbon integral model had serious errors regarding the predicted results. A new model based on the correlation between the volume fraction of CO and the carbon content in converter was built to predict the carbon content near the end point. The hit rate of the carbon prediction model was 95.79% for the end point carbon content ≤0.088% with a precision of ±0.03%.

Keywords

Carbon content Prediction CO Decarburization 

Notes

Acknowledgements

This work was supported by the National Natural Science Foundation of China under Grant 51474023.

References

  1. 1.
    Pacciarelli D, Pranzo M (2004) Production scheduling in a steelmaking-continuous casting plant. Comput Cheml Eng 28(12):2823–2835CrossRefGoogle Scholar
  2. 2.
    Litvinenko EF, Vakula VS (2003) Development of systems for controlling steel-making in oxygen-converter shops. Metall Gornorud Promst 8:4390–4395Google Scholar
  3. 3.
    Boom R (1994) Sublance technology for oxygen steelmaking. Steel Technol Int 3:91–94Google Scholar
  4. 4.
    Naito K, Kitamura S, Ogawa Y (2002) Effects of BOF top blowing and bottom stirring conditions on suppressing excessive oxidation. Ironmak Steelmak 29(3):208–213CrossRefGoogle Scholar
  5. 5.
    Friedl E, Kaiser HP, Heinz W (1990) Automatic blowing process in BOF and direct tapping using the sublance system. Metall Plant Technol Int 13(1):28–32Google Scholar
  6. 6.
    Robson W J, Rimes P (1993) Successful sublance implementation at BHP, New Castle Works. In: 76th steelmaking conference, pp 163–168Google Scholar
  7. 7.
    Zonneveld P (1995, April) How to boost BOF output and reduce cost per ton of steel. In: Steelmaking conference proceedings, vol 78, pp 147–152Google Scholar
  8. 8.
    Boom R, Zonneveld P, Parker J (1989) Benefits of a sublance system in oxygen steelmaking. Steel Times Int 13(4):36–37Google Scholar
  9. 9.
    Kanemoto M, Okajima M (1990) Phosphprus and manganese control technologies in basic oxygen furnace and their future view. Tetsu-to-Hagané 76(11):1964–1971CrossRefGoogle Scholar
  10. 10.
    Iso H, Ueda Y, Yoshida T et al (1988) Refining control of top and bottom blowing converter by manipulating bottom blown flow rate. Trans ISIJ 28(5):372–381CrossRefGoogle Scholar
  11. 11.
    Hara T, Nakamura H, Tawara M, Yamagami T (1989, April) Development of direct tapping at no. 2 steelmaking shop in Kure works. In: Steelmaking conference proceedings, vol 72, pp 155–158Google Scholar
  12. 12.
    Kato Y, Takahashi Y, Sakuraya T, Fujii T, Omiya S (1990) Optimization of the blowing sequence in a top and bottom blowing converter containing pretreated hot metal. Tetsu-to-Hagané 76(4):560–567CrossRefGoogle Scholar
  13. 13.
    Takawa T, Tatayama K, Katohgi K (1988) Analysis of converter process variables from exhaust gas. Trans ISIJ 28(1):59–67CrossRefGoogle Scholar
  14. 14.
    Merriman D (1997) Mass spectrometry for oxygen steelmaking control. Steel Times 225(11):439Google Scholar
  15. 15.
    Sun S, Liao D, Pyke N et al (2008) Development of an offgas/model technology to replace sublance operation for KOBM endpoint carbon control at ArcelorMittal dofasco. Iron Steel Technol 5(11):36–42Google Scholar
  16. 16.
    Scipolo V, Maiolo J (2008) Application of EFSOP holistic optimization TM technology to oxygen steelmaking. In: AISTech proceedings, AIST, PittsburghGoogle Scholar
  17. 17.
    Liu JZ, Xue QG, Zhang SY (2004) Carbon deposition reaction based on heating recycling gas of oxygon blast furnaces. J Univ Sci Technol Beijing 36(5):592–596Google Scholar

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  • Rong Cheng
    • 1
  • Jiongming Zhang
    • 1
    Email author
  • Liangjin Zhang
    • 2
  • Haitao Ma
    • 1
  1. 1.State Key Laboratory of Advanced MetallurgyUniversity of Science and Technology BeijingBeijingChina
  2. 2.China National Construction Steel Quality Supervision and Test Centre, Central Research Institute of Building and Construction Co., Ltd, Mcc GroupBeijingChina

Personalised recommendations