Advertisement

Numerical Simulation Study on Design Optimization of Inner Cavity Dimensions of Large-Capacity Tundish

  • Yong Zhong
  • Mingmei ZhuEmail author
  • Bing Huang
  • AiPing Zhang
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

In this paper, the design and optimization of tundish size for single-strand slab are studied. A three-dimensional mathematical model is established for calculating the flow field and temperature field of molten steel in the tundish with different length to height (L/H) ratios, width to height ratios (W/H), and angles of edges. The concentration distribution curves of the tracer at the outlet are calculated by using component transfer equation. On this basis, the average residence times and flow patterns of the molten steel can be obtained. The trajectories and the removal ratios of the inclusions are calculated by using Lagrange particles tracking model and DPM model. The validity of the mathematical model is verified by the results of water model experiment. The optimized L/H ratio and W/H ratio are obtained from the numerical simulation results, and it can provide a theoretical basis for the tundish used in steel mill.

Keywords

Tundish Structure size Numerical simulation Residence time distribution curve 

References

  1. 1.
    Lei H, Wang L, Wu Z et al (2002) Collision and coalescence of alumina particles in the vertical bending continuous caster. ISIJ Int 42(7):717–725CrossRefGoogle Scholar
  2. 2.
    Zhang L, Taniguchi S, Cai K (2000) Fluid flow and inclusion removal in continuous casting tundish. Metall Mater Trans B 31B:253–266 (2000)CrossRefGoogle Scholar
  3. 3.
    Hou Q, Yue Q, Wang H (2008) Modeling of inclusion motion and flow patterns in swirling flow tundishes with symmetrical and asymmetrical structures. ISIJ Int 48(6):87–792CrossRefGoogle Scholar
  4. 4.
    Palai P, Sahoo PP, Dey A et al (2013) Constitutional segregation of Al2O3 in mold slag and its impact on steel cleanliness during continuous casting. Metall Mater Trans B 44(5):1185–1189CrossRefGoogle Scholar
  5. 5.
    Chattopadhyay K, Isac M, Guthrie RIL (2010) Physical and mathematical modelling of steelmaking tundish operations: a review of the last decade(1999–2009). ISIJ Int 50(3):331CrossRefGoogle Scholar
  6. 6.
    Kumar A, Mazumdar D, Koria SC (2008) Modeling of fluid flow and residence time distribution in a four-strand tundish for enhancing inclusion removal. ISIJ Int 48(1):38CrossRefGoogle Scholar
  7. 7.
    Zong JH, Yi KW, Yoon JK (1999) Residence time distribution analysis by the modified combined model for the design of continuous refining vessel. ISIJ International 39(2):139–148CrossRefGoogle Scholar
  8. 8.
    Xu K, Thomas BG (2012) Particle-size-grouping model of precipitation kinetics in microalloyed steel. Metall Mater Trans A 43A:1079–1096CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  • Yong Zhong
    • 1
  • Mingmei Zhu
    • 1
    Email author
  • Bing Huang
    • 1
  • AiPing Zhang
    • 1
  1. 1.College of Materials Science and EngineeringChongqing UniversityChongqingChina

Personalised recommendations