Advertisement

Research on Dezincification of Ironmaking and Steelmaking Ashes

  • Yan Zhang
  • Xiaojiang Wu
  • Meng Xu
  • Gele QingEmail author
  • Haoyu Cai
  • Wenbin Huang
  • Yunqing Tian
  • Wenwang Liu
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

In this paper, research on dezincification in ironmaking and steelmaking processes was carried out. Ashes of ironmaking and steelmaking, amylum and bentonite were used as the experimental materials. Bentonite has no significant effect on quality of green pellet by pelletizing process; pressing pressure should be controlled at 10 MPa while using press machine to produce cold-bonded pellet; falling strength of cold-bonded pellet would have a sharp increase while adding a little sodium hydroxide in amylum; ZnO will be removed at a high temperature with carbon contained in experimental materials, but removal rate decreases with the increase of CaCl2; less than 30% of ZnO would be removed by adding calcium chloride without carbon.

Keywords

Dezincification Ashes Pelletizing Cold-bonded pellet 

References

  1. 1.
    Kelebek S, Yörük S, Davis B (2004) Characterization of basic oxygen furnace dust and zinc removal by acid leaching. Miner Eng 17(2):285–291CrossRefGoogle Scholar
  2. 2.
    Su F, Lampinen H-O, Robinson R (2004) Recycling of sludge and dust to the BOF converter by cold bonded pelletizing. ISIJ Int 44(4):770–776CrossRefGoogle Scholar
  3. 3.
    Mikhail SA, Turcotte A-M (1998) Thermal reduction of steel-making secondary materials: I. Basic-oxygen-furnace dust. Thermochimica Acta 311(1):113–119CrossRefGoogle Scholar
  4. 4.
    Li Z (2002) Damage of element of zinc to blast furnace and its inhibition. Bao Steel Technol 6(18–20):24Google Scholar
  5. 5.
    Esezobor DE, Balogun SA (2013) Zinc accumulation during recycling of iron oxide wastes in the blast furnace. Ironmaking Steelmaking 33(5):419–425CrossRefGoogle Scholar
  6. 6.
    Van Herck P, Vandecasteele C, Swennen R, Mortier R (2000) Zinc and lead removal from blast furnace sludge with a hydrometallurgical process. Environ Sci Technol 34(17):3802–3808CrossRefGoogle Scholar
  7. 7.
    Vereš J, Lovás M, Jakabský Š, Šepelák V, Hredzák S (2012) Characterization of blast furnace sludge and removal of zinc by microwave assisted extraction. Hydrometallurgy 129–130:67–73CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  • Yan Zhang
    • 1
  • Xiaojiang Wu
    • 2
  • Meng Xu
    • 1
  • Gele Qing
    • 1
    Email author
  • Haoyu Cai
    • 1
  • Wenbin Huang
    • 2
  • Yunqing Tian
    • 1
  • Wenwang Liu
    • 2
  1. 1.Shougang Research Institute of TechnologyBeijingChina
  2. 2.Shougang Jingtang United Iron and Steel Co. Ltd.TangshanChina

Personalised recommendations