Advertisement

Effect of Alloying with Rare-Earth Metals on the Degradation of Magnesium Alloys Studied Using a Combination of Isothermal Calorimetry and Pressure Measurements

  • Lars Wadsö
  • Norbert Hort
  • Dmytro OrlovEmail author
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

With all the versatility in structural performance and recent progress in developing magnesium alloys, their Achilles heel remains to be degradation or corrosion property. While applications in mobility demand corrosion protection by all means, bio-medical applications of Mg alloys require well-controlled degradation rates. Meeting these requirements is only possible through the understanding of phenomena on surface–environment interfaces and the characteristics of Mg alloys affecting them. In this study, in situ monitoring during immersion testing along with 3D-optical and scanning-electron microscopy were used for assessing structure-performance characteristics. The effect of alloying with rare-earth metals on the degradation of magnesium has been studied in three model alloys Mg–0.8Nd, Mg–0.2Zr and Mg–2.0Gd using a combination of isothermal calorimetry and pressure measurements. The combination appears to be a powerful method to study corrosion of magnesium. The degradation of the Gd-containing alloy is approximately 100 times that of the other two alloys studied and is associated with the release of heat and hydrogen gas in large quantities. Differences in the morphology of corrosion products on Mg–0.8Nd and Mg–0.2Zr alloy surfaces can be associated with minute variations in the degradation process detected by the developed method.

Keywords

Magnesium alloys Degradation Isothermal calorimetry Pressure measurements 

Notes

Acknowledgements

We gratefully appreciate Alexis Guy from ENSMA, Poitiers, France, and Nabil Nasri from INSA, Lyon, France, for performing the experiments during their internship at Lund University in 2018. DO also gratefully acknowledges Slovenian Research Agency (ARRS) for the financial support through Research Project J2-7157.

References

  1. 1.
    T. M. Pollock, Science 2010, 328, 986.CrossRefGoogle Scholar
  2. 2.
    M. Esmaily, J. E. Svensson, S. Fajardo, N. Birbilis, G. S. Frankel, S. Virtanen, R. Arrabal, S. Thomas, L. G. Johansson, Progress in Materials Science 2017, 89, 92.CrossRefGoogle Scholar
  3. 3.
    L. E. Paulsson, L. G. Svensson, C. K. Forsgren, Vol. TM001 (Ed: T. AB), Järfälla, Sweden.Google Scholar
  4. 4.
    L. Wadsö, D. Orlov, in Magnesium Technology 2018 (Eds: O. D, J. V, S. K, N. N), Phoenix AZ, USA 2018, 31.Google Scholar
  5. 5.
    F. R. Elsayed, N. Hort, M. Salgado-Ordorica, K. U. Kainer, Magnesium Permanent Mold Castings Optimization Materials Science Forum 690 (2011) 65–68. https://doi.org/10.4028/www.scientific.net/MSF.690.65 CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  1. 1.Division of Building MaterialsLTH, Lund UniversityLundSweden
  2. 2.Magnesium Innovation Centre, Helmholtz-Zentrum GeesthachtGeesthachtGermany
  3. 3.Division of Materials EngineeringLTH, Lund UniversityLundSweden

Personalised recommendations