Advertisement

Production of AlSi12CuNiMg/Al2O3 Micro/Nanodispersed Surface Composites Using Friction Stir Processing for Automotive Applications

  • L. Tonelli
  • M. RefatEmail author
  • S. Toschi
  • M. M. Z. Ahmed
  • Essam Ahmed
  • A. Morri
  • I. El-Mahallawi
  • L. Ceschini
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

The service life of automotive components often depends on their surface properties. Consequently, improved surface properties with the retainment of bulk characteristics are necessary for such components to guarantee enhanced mechanical and tribological properties. In this research, friction stir processing (FSP) is used to produce surface composites characterized by extruded AlSi12CuNiMg matrix and micro and nano-sized Al2O3 particles as reinforcing phase. Multiple passes of FSP using two different strategies were applied to distribute the Al2O3 particles. The effect of the different FSP parameters and sequence of rotation direction for the applied passes was investigated. The processed surface layers were analyzed through optical and scanning electron microscopy, hardness, and wear testing. The properties of the processed composite surface showed to be affected by both the size of reinforcing particles and the processing direction sequence. A comparison between properties of the produced surface composites and the base metal was also carried out. Bench-type test developed to measure the weight loss of samples under sand erosion conditions.

Keywords

Friction Stir Processing (FSP) Surface Metal Matrix Composite (SMMC) Microstructure Hardness Tribological properties AlSi12CuNiMg 

Notes

Acknowledgements

The Italian Ministry of Foreign Affairs and International Cooperation (MAECI), and The Egyptian Science and Technology Development Fund (STDF) are deeply acknowledged for funding this work under the Executive Programme of Scientific and Technological Cooperation Between Arab Republic of Egypt and Italian Republic.

References

  1. 1.
    Miller W et al (2000) Recent development in aluminium alloys for the automotive industry. Mater Sci Eng A 280(1):37–49CrossRefGoogle Scholar
  2. 2.
    Bogdanoff T (2017) Development of aluminium-silicon alloys with improved properties at elevated temperatureGoogle Scholar
  3. 3.
    Rakhmonov J, Timelli G, Bonollo F (2016) The effect of transition elements on high-temperature mechanical properties of Al–Si foundry alloys–a review. Advanc Eng MaterGoogle Scholar
  4. 4.
    Sears K (1997) Autom Eng Strategic Overview 2(1):55–68Google Scholar
  5. 5.
    Kaufman JG, Rooy EL (2004) Aluminium alloy castings. American Foundry Society, Columbus, OhioGoogle Scholar
  6. 6.
    Askeland DR, Phulé PP (2003) The science and engineering of materialsGoogle Scholar
  7. 7.
    Stadler F et al (2012) Effect of main alloying elements on strength of Al–Si foundry alloys at elevated temperatures. Int J Cast Met Res 25(4):215–224CrossRefGoogle Scholar
  8. 8.
    Tenekedjiev N, Gruzleski J (1990) Hypereutectic aluminium-silicon casting alloys—a review. Cast Metals 3(2):96–105CrossRefGoogle Scholar
  9. 9.
    Dieter GE, Bacon DJ (1986) Mechanical metallurgy, vol 3. McGraw-Hill, New YorkGoogle Scholar
  10. 10.
    Zamani M et al (2017) The role of transition metal additions on the ambient and elevated temperature properties of Al–Si alloys. Mater Sci Eng AGoogle Scholar
  11. 11.
    Sepehrband P, Mahmudi R, Khomamizadeh F (2005) Effect of Zr addition on the aging behaviour of A319 aluminium cast alloy. Scriptamaterialia 52(4):253–257Google Scholar
  12. 12.
    Mahmudi R, Sepehrband P, Ghasemi H (2006) Improved properties of A319 aluminium casting alloy modified with Zr. Mater Lett 60(21):2606–2610CrossRefGoogle Scholar
  13. 13.
    Ma ZY (2008) Friction stir processing technology: a review. Metallurg Mater Trans A 39(3):642–658CrossRefGoogle Scholar
  14. 14.
    Zhu C, Lv Y, Qian C, Qian H, Jiao T, Wang L, Zhang F (2016) Proliferation and osteogenic differentiation of rat BMSCs on a novel Ti/SiC metal matrix nanocomposite modified by friction stir processing. Scientific Reports 6:38875CrossRefGoogle Scholar
  15. 15.
    Refat M, Abdelmotagaly AMM, Ahmed MMZ, El-Mahallawi I (2015) The effect of heat treatment on the properties of friction stir processed AA7075-O with and without nano alumina additions. Friction Stir Welding and Processing VIII. Springer, Cham, pp 115–123CrossRefGoogle Scholar
  16. 16.
    Mishra RS, Ma ZY (2005) Friction stir welding and processing. Mater Sci Eng R Reports 50(1–2):1–78CrossRefGoogle Scholar
  17. 17.
    Mishra RS, Ma ZY, Charit I (2003) Friction stir processing: a novel technique for fabrication of surface composite. Mater Sci Eng A 341(1–2):307–310CrossRefGoogle Scholar
  18. 18.
    El-Mahallawi I, Ahmed MMZ, Mahdy AA, Abdelmotagaly AMM, Hoziefa W, Refat M (2017). Effect of Heat treatment on friction-stir-processed nanodispersed AA7075 and 2024 Al Alloys. In: Friction Stir Welding and Processing IX. Springer, Cham, pp 297–309Google Scholar
  19. 19.
    Ahmed MMZ, Refat M, El-Mahallawi I (2014) Manufacturing of nano-surface AA7075 composites by friction stir processing. In: Light Metals. Springer, Cham, pp 1417–1422‏Google Scholar
  20. 20.
    Zahmatkesh B, Enayati MH (2010) A novel approach for development of surface nanocomposite by friction Stir processing. Mater Sci Eng A 527:6734–6740CrossRefGoogle Scholar
  21. 21.
    Dixit Manisha, Newkirk Joseph W, Mishra Rajiv S (2007) Properties of friction stirprocessed Al 1100-NiTi composite. Scr Mater 56:541–544CrossRefGoogle Scholar
  22. 22.
    Refat M, Elashery A, Toschi S, Ahmed MMZ, Morri A, El-Mahallawi I, Ceschini L (2016) Microstructure, hardness and impact toughness of heat-treated nanodispersed surface and friction stir-processed aluminum alloy AA7075. J Mater Eng Perform 25(11):5087–5101CrossRefGoogle Scholar
  23. 23.
    Mohamed AMA, Samuel FH, Samuel AM, Doty HW (2009) Influence of additives on the impact toughness of Al–10.8% Si near-eutectic cast alloys. Mater Des 30:4218–4229CrossRefGoogle Scholar
  24. 24.
    Konecˇná R, Nicoletto G, Kunz L, Riva E (2016) The role of elevated temperature exposure on structural evolution and fatigue strength of eutectic AlSi12 alloys. Int J Fatigue 83:24–35CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  • L. Tonelli
    • 1
  • M. Refat
    • 2
    Email author
  • S. Toschi
    • 1
  • M. M. Z. Ahmed
    • 3
    • 4
  • Essam Ahmed
    • 4
  • A. Morri
    • 1
  • I. El-Mahallawi
    • 5
  • L. Ceschini
    • 6
  1. 1.Department of Industrial EngineeringUniversity of BolognaBolognaItaly
  2. 2.Centre for Simulation Innovation and Advanced ManufacturingThe British University in EgyptEl-ShoroukEgypt
  3. 3.Mechanical Engineering DepartmentThe British University in EgyptEl-ShoroukEgypt
  4. 4.Metallurgical and Materials Engineering DepartmentSuez UniversitySuezEgypt
  5. 5.Metallurgy and Materials Engineering DepartmentCairo UniversityGizaEgypt
  6. 6.Department of Civil, Chemical, Environmental and Materials EngineeringUniversity of BolognaBolognaItaly

Personalised recommendations