Advertisement

Study of the Influence of Organic Peroxide and Elastomeric Modifier in the Mechanical and Flow Properties of the Recycled Polypropylene

  • Patricia N. S. PovedaEmail author
  • Leonardo G. A e Silva
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

Plastics have been replacing other traditional materials such as wood, metal and glass over the past decades due to its versatility in properties, processability, and cost. Polypropylene can be highlighted as one of the main thermoplastics used in industry since it presents properties suitable for various applications, combining density, cost, availability, and ease of molding. By considering the mechanical recycling of post-consumer or post-industrial material, difficulty in flowability is observed, which demands modification to promote processability. This work used the traditional solution for flow modification (peroxide) and elastomeric modifier to evaluate the impact of these additives on the mechanical and flow properties of recycled polypropylene by tensile strength, melt index and spiral flow analyses. Although the modified sample with organic peroxide had a higher melt flow index, the mechanical resistance was lower than the elastomeric modifier, which showed good performance in the material flow during processing according to spiral flow analysis.

Keywords

Polypropylene Elastomer Peroxide Modification Characterization 

Notes

Acknowledgements

The authors thank IPEN-CNEN/SP for the support in carrying out this work.

References

  1. 1.
    Pitt FD, Boing D, Barros AAC (2011) Desenvolvimento histórico, científico e tecnológico de polímeros sintéticos e de fontes renováveis. Unifebe, Santa CatarinaGoogle Scholar
  2. 2.
    La Mantia F (2002) Handbook of plastics recycling. Smithers Rapra Publishing, United KingdomGoogle Scholar
  3. 3.
    Murphy J (2001) Additives for plastics handbook. Elsevier Advanced Technology, OxfordGoogle Scholar
  4. 4.
    Rabello M (2000) Aditivação de polímeros. Artliber Editora Ltda, São PauloGoogle Scholar
  5. 5.
    American Society for Testing and Materials (2014) Standard test method for tensile properties of plastics. ASTM (ASTM D 638–14)Google Scholar
  6. 6.
    American Society for Testing and Materials (2013) Standard test method for melt flow rates of thermoplastics by extrusion plastometer. ASTM (ASTM D 1238–13)Google Scholar

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  • Patricia N. S. Poveda
    • 1
    Email author
  • Leonardo G. A e Silva
    • 1
  1. 1.Instituto de Pesquisas Energéticas e Nucleares (IPEN_CNEN/SP)São PauloBrazil

Personalised recommendations