Advertisement

Analysis of the Feasibility of the Use Waste from the Foundry Process in Green Sands in the Manufacturing of Soil-Cement Blocks

  • Niander A. CerqueiraEmail author
  • Victor B. Souza
  • Guilherme M. R. Coutinho
  • Lucas X. P. da Silva
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

The production of building blocks with the use of industrial waste has proven to be an important way to mitigate the environmental liabilities that have been obtained by industrialization. In the present study, green cast sand residue was used for the production of pressed soil blocks, replacing part of the soil. Soil-cement blocks with partial replacement of the soil by green sand of function were produced in the percentages of 5, 10, 15 and 20. The mechanical and water absorption tests were performed in blocks and three-block prisms, with satisfactory results showing the possibility of the incorporation of the residue in the block production. Thus, it can be concluded that it is a viable alternative for both the waste-producing industry and the civil construction sector, for employment in small and medium-sized buildings.

Keywords

Waste casting Green sand Pressed blocks Soil-cement 

References

  1. 1.
    Siegel M (1978) Foundry processes: generalities, general considerations about the choice of process, relative importance of the various processes. 10th edn. Brazilian Association of Metals—ABMGoogle Scholar
  2. 2.
    Brazilian Association of Foundry São Paulo: ABIFA (2018) [Accessed on April 13, 2018]. http://www.abifa.com.br
  3. 3.
    Brazilian Association of Technical Standards NBR 10833: 2012 (2012) Manufacture of brick and block of soil-cement using manual or hydraulic press—Procedure. Rio de JaneiroGoogle Scholar
  4. 4.
    Kondic V (1973) Foundry metallurgical principles, 1st edn. Polygon, São PauloGoogle Scholar
  5. 5.
    Sánches E (2013) New Brazilian standardization for structural masonry. Interciência, Rio de JaneiroGoogle Scholar
  6. 6.
    Ramalho MA, Corrêa MRS (2003) Design of structural masonry buildings, 1st edn. Pini, São PauloGoogle Scholar
  7. 7.
    Brazilian Association of Technical Standards NBR 7181 (1984) Soil analysis. Rio de JaneiroGoogle Scholar
  8. 8.
    Alexandre J (2000) Analysis of raw material and mass compositions used in red ceramics [PhD thesis]. Universidade Estadual do Norte Fluminense Darcy Ribeiro. Campos dos GoytacazesGoogle Scholar
  9. 9.
    Vieira CMF (2001) Characterization of clays of fields of goytacazes aiming at the manufacture of semiporous ceramic coating [Doctoral thesis]. Universidade Estadual do Norte Fluminense—UENFGoogle Scholar
  10. 10.
    Brazilian Association of Technical Standards NBR 6459 (1984) Soil—determination of the liquidity limit. Rio de JaneiroGoogle Scholar
  11. 11.
    Brazilian Association of Technical Standards NBR 7180 (1984) Soil—determination of the plasticity limit. Rio de JaneiroGoogle Scholar
  12. 12.
    Brazilian Association of Technical Standards NBR 6508 (1984) Determination of the specific mass. Rio de JaneiroGoogle Scholar
  13. 13.
    Brazilian Association of Technical Standards NBR 15270-3 (2005) Ceramic components—Part 3: ceramic blocks for structural and sealing masonry—test methods. Rio de JaneiroGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  • Niander A. Cerqueira
    • 1
    • 2
    Email author
  • Victor B. Souza
    • 1
    • 3
  • Guilherme M. R. Coutinho
    • 1
  • Lucas X. P. da Silva
    • 1
  1. 1.Sociedade Universitária Redentor - REDENTORItaperunaBrazil
  2. 2.Universidade Estadual do Norte Fluminense Darcy Ribeiro – UENFCampos dos GoytacazesBrazil
  3. 3.Universidade Federal Fluminense - UFFNiteróiBrazil

Personalised recommendations