Advertisement

Influence of Albizzia Lebbeck Benth Pods Particulate on Mechanical Properties of Low-Density Polyethylene

  • Oluwashina Philips GbeneborEmail author
  • Emmanuel Isaac Akpan
  • Festus Omo Osabumwenre
  • Samson Oluropo Adeosun
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

Albizzia Lebbeck Benth (ALB) is a tree with antimicrobial, antioxidant, anticancer potentials, renewable and non-toxic. These qualities make it worth exploring in the development of new materials to replace the fossil-based ones. In this study, pods of ALB were ground to 150 and 408 μm particle sizes and characterized using Fourier Transform Infrared Spectroscopy (FTIR). Low-density polyethylene (LDPE) was reinforced with 10 wt% ALB particles and cast into tensile and flexural strengths samples. The FTIR spectrum reveals ALB to consist majorly OH, COOH, C–O–C and C=C groups. The LDPE increases in tensile strength by 364 and 171% for 150 and 408 µm particle sizes ALB addition respectively, while it flexural strength rises from 3.39 to 6.05 and 11.42 MPa with the use of 408 and 150 μm particle sizes respectively. Scanning Electron Microscope (SEM) characterisation reveals good wettability between ALB and LDPE resulting improved strengths.

Keywords

Flexural strength Tensile strength LDPE 

References

  1. 1.
    Massey S, Adnot A, Rjeb A, Roy D (2007) Action of water in the degradation of low-density polyethylene studied by X-ray photoelectron spectroscopy. Express Polym Lett 1(8):506–511CrossRefGoogle Scholar
  2. 2.
    Bindal A, Singhn S, Batra NK, Khanna R (2013) Development of glass/jute fibers reinforced polyester composite. Indian J Mater Sci, 1–6CrossRefGoogle Scholar
  3. 3.
    Debnath S, Madhusoothanan M (2009) Compression properties of polyester needle punched fabric. J Eng Fibers Fabr 4(4):14–19Google Scholar
  4. 4.
    Rodrigues EF, Maia TF, Mulinari DR (2011) Tensile strength of polyester resin reinforced sugarcane bagasse fibers modified by estherification. Eng Procedia 10:2348–2352CrossRefGoogle Scholar
  5. 5.
    Salmah H, Marliza M, The PL (2013) Treated coconut shell reinforced unsaturated polyester composites. Int J Eng Technol 13(2):94–103Google Scholar
  6. 6.
    Ibrahim MS, Sapuan SM, Faieza AA (2012) Mechanical and thermal properties of composites from unsaturated polyester filled with oil palm ash. J Mech Eng Sci 2:133–147CrossRefGoogle Scholar
  7. 7.
    Raju GU, Kumarappa S, Gaitonde VN (2012) Mechanical and physical characterization of agricultural waste reinforced polymer composites. J Mater Environ Sci 3(5):907–916Google Scholar
  8. 8.
    Shehu U, Aponbiede O, Ause T, Obiodunukwe EF (2014) Effect of particle size on the properties of polyester/palm kernel shell (PKS) particulate composites. J Mater Environ Sci 5(2):366–373Google Scholar
  9. 9.
    Adeosun SO, Usman MA, Akpan EI, Dibie WI (2014) Characterization of LDPE reinforced with calcium carbonate-fly ash hybrid filler. J Miner Mater Charact Eng 2:334–345Google Scholar
  10. 10.
    Nazneen MB, Wesley EG, Johnson M (2012) FT-IR studies on the leaves of albizia lebbeck benth. Int J Pharm Pharm Sci 4(3):293–296Google Scholar
  11. 11.
    Cerqueira EF, Baptista CARP, Mulinari DR (2011) Mechanical behaviour of polypropylene reinforced sugarcane bagasse fibers composites. Eng Procedia 10:2046–2051CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  • Oluwashina Philips Gbenebor
    • 1
    Email author
  • Emmanuel Isaac Akpan
    • 2
  • Festus Omo Osabumwenre
    • 1
  • Samson Oluropo Adeosun
    • 1
  1. 1.Department of Metallurgical and Materials EngineeringUniversity of LagosLagosNigeria
  2. 2.Institut fur Verbundwerkstoffe GmbHKaiserslauternGermany

Personalised recommendations