Advertisement

Structure and Magnetic Properties of a Medium-Entropy Fe46Co34Ni20 Alloy Powder

  • Anuj Rathi
  • Tanjore V. JayaramanEmail author
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

The nanocrystalline/nanoscale ternary FeCoNi alloys are known to have an excellent combination of soft-magnetic properties and thermal stability and they find applications in various miniaturized devices, e.g. sensors and actuators. A medium-entropy nanocrystalline Fe46Co34Ni20 alloy was synthesized by mechanical alloying. The x-ray diffraction and scanning electron microscopy were adopted for their structural characterization at ambient temperature. The alloy powder was comprised of two phases: an f.c.c. phase (γ) and a b.c.c. phase (α-Fe). The powder particles were irregularly shaped and, the mean and D90 of the powder particles was ~5 μm and ~10 μm, respectively. The grain size was less than ~10 nm. The intrinsic coercivity and saturation magnetization of the alloy powder was ~3 kA/m and ~164 Am2/kg, respectively. The nanocrystalline alloy powder exhibited superior soft-magnetic properties—magnetization increased by ~24% and the coercivity decreased by ~16 times—as compared to the nanoparticles of a similar composition, synthesized by chemical methods. Thermal treatment at 840 K resulted in an improvement in the soft-magnetic properties of the mechanically alloyed powder—saturation magnetization increased by ~13% and intrinsic coercivity decreased by ~33%.

Keywords

Fe–Co–Ni ternary alloys Mechanical alloying Magnetic properties 

Notes

Acknowledgements

The authors thank the College of Engineering and Computer Science and the Institute of Advanced Vehicle Systems at the University of Michigan in Dearborn for the financial (Grant# U052349) and infrastructural support to conduct the experimental work.

References

  1. 1.
    Osaka T, Takai M, Hayashi H, Ohashi K, Satto M, Yamada K (1998) A soft magnetic CoNiFe film with high saturation magnetic flux density and low coercivity. Nature 392:796–798CrossRefGoogle Scholar
  2. 2.
    Ohashi K, Yasue Y, Saito M, Yamada K, Osaka T, Takai M, Hayashi K (1998) Newly developed inductive write head with electroplated CoNiFe film. IEEE Trans Magn 34:1462–1464CrossRefGoogle Scholar
  3. 3.
    Osaka T, Sawaguchi T, Mizutani F, Yokoshima F, Takai M, Okinaka Y (1999) Effects of saccharin and thiourea on sulfur inclusion and coercivity of electroplated soft magnetic CoNiFe film. J Electrochem Soc 146:3295–3299CrossRefGoogle Scholar
  4. 4.
    Eftekhari A (2003) Soft magnetic CoNiFe films electrodeposited under centrifugal forces. J Phys D Appl Phys 36:1183–1187CrossRefGoogle Scholar
  5. 5.
    Yoo BY, Hernandez SC, Park DY, Myung NV (2006) Electrodeposition of FeCoNi thin films for magnetic-MEMS devices. Electrochim Acta 51:6346–6352CrossRefGoogle Scholar
  6. 6.
    Wu HQ, Xu DM, Wang Q, Wang QY, Su GQ, Wei XW (2008) Composition-controlled synthesis, structure and magnetic properties of ternary FexCoyNi100-x-y alloys attached on carbon nanotubes. J Alloy Compd 463:78–83CrossRefGoogle Scholar
  7. 7.
    Kuhrt C, Schultz L (1993) Phase formation and martensitic transformation in mechanically alloyed nanocrystalline Fe-Ni. J Appl Phys 73:1975–1980CrossRefGoogle Scholar
  8. 8.
    Kuhrt C, Schultz L (1993) Formation and magnetic properties of nanocrystalline mechanically alloyed Fe-Co and Fe-Ni. J Appl Phys 73:6588–6590CrossRefGoogle Scholar
  9. 9.
    Kaloshkin SD, Tcherdyntsev VV, Tomilin IA, Baldokhin YV, Shelekhov EV (2001) Phase transformations in Fe–Ni system at mechanical alloying and consequent annealing of elemental powder mixtures. Phys B 299:236–241CrossRefGoogle Scholar
  10. 10.
    Bozorth RM (1993) Ferromagnetism. IEEE Press, NewYorkCrossRefGoogle Scholar
  11. 11.
    Sourmail T (2005) Near equiatomic FeCo alloys: constitution, mechanical, and magnetic properties. Prog Mater Sci 50(7):816–880CrossRefGoogle Scholar
  12. 12.
    Bradley PE, Janossy B, Landolt D (2001) Pulse plating of cobalt-iron-copper alloys. J Appl Electrochem 31:137–144CrossRefGoogle Scholar
  13. 13.
    Liu X, Zangari G, Shamsuzzoha M (2003) Structural and magnetic characterization of electrodeposited, high moment FeCoNi films. J Electrochem Soc 150:C159–C168CrossRefGoogle Scholar
  14. 14.
    Zhang Y, Ivey DG (2004) Electroplating of nanocrystalline CoFeNi soft magnetic thin films from a stable citrate-based bath. Chem Mater 16:1189–1194CrossRefGoogle Scholar
  15. 15.
    Toneguzzo P, Viau G, Acher O, Guillet F, Bruneton E, Fievet-Vincent F, Fievet F (2000) CoNi and FeCoNi fine particles prepared by the polyol process: physicochemical characterization and dynamic magnetic properties. J Mater Sci 35:3767–3784CrossRefGoogle Scholar
  16. 16.
    Li X, Takahashi S (2000) Synthesis and magnetic properties of Fe-Co-Ni nanoparticles by hydrogen plasma-metal reaction. J Magn Magn Mater 214:195–203CrossRefGoogle Scholar
  17. 17.
    Jartych E (2011) On the magnetic properties of mechanosynthesized Co-Fe-Ni ternary alloys. J Magn Magn Mater 323:209–216CrossRefGoogle Scholar
  18. 18.
    Pikula T, Oleszak D, Pękała M, Jartych E (2008) Structure and some magnetic properties of mechanically synthesized and thermally treated Co–Fe–Ni alloys. J Magn Magn Mater 320:413–420CrossRefGoogle Scholar
  19. 19.
    Cantor B (2014) Multicomponent and high entropy alloys. Entropy 16:4749–4768CrossRefGoogle Scholar
  20. 20.
    Micracle DB, Senkov ON (2017) A critical review of high entropy alloys and related concepts. Acta Mater 122:448–511CrossRefGoogle Scholar
  21. 21.
    Cullity BD, Graham CD (2009) Introduction to magnetic materials. IEEE Press, Wiley, HobokenGoogle Scholar
  22. 22.
    Krishnan KM (2016) Fundamental and applications of magnetic materials. Oxford University PressGoogle Scholar
  23. 23.
    Suryanarayana C (2004) Mechanical alloying and milling. Marcel Dekker, New YorkCrossRefGoogle Scholar
  24. 24.
    Ferreria T, Rasband W (2012) Image J User Guide (ImageJ/Fiji 1.46)Google Scholar
  25. 25.
    Tedenac JC (2008) Cobalt-Iron-Nickel, MSIT, Landolt-Bronstein New Series. SpringerGoogle Scholar
  26. 26.
    Co (Cobalt) Ternary phase diagrams, alloy phase diagrams, vol 3. ASM handbook ASM International, 2016, pp 703–712Google Scholar
  27. 27.
    Suryanarayana C, Norton MG (1998) X-ray diffraction: a practical approach. Plenum Publishing Corporation, Springer, New YorkCrossRefGoogle Scholar
  28. 28.
    Cullity BD, Stock SR (2001) Elements of X-ray diffraction. Prentice Hall, Upper Saddle RiverGoogle Scholar
  29. 29.
    German RM (2005) Powder metallurgy and particulate processing. Metal Powder Industries Federation, New JerseyGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringUniversity of MichiganDearbornUSA

Personalised recommendations