Advertisement

Alloying and Annealing Effects on Grain Boundary Character Evolution of Al-alloy 7075 Thin Films: An ACOM-TEM Analysis

  • Prakash Parajuli
  • Rubén Mendoza-Cruz
  • Miguel José Yacamán
  • Arturo PonceEmail author
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

Since polycrystalline materials consist of a complex network of various types of grain boundaries (GBs), a detailed study on the types of the GBs, their distribution and how they are connected is crucial to further enhance the material’s performance. Herein, the GB character distribution (types and connectivity) of as-deposited Al and Al-alloy 7075 thin films, as well as annealed Al-alloy thin films, was investigated using an advanced microscopic technique: ACOM-TEM. Annealing processes up to 12 h caused a decrease in the content ratio of random high-angle GBs (r-HAGBs) and triple junctions comprised of r-HAGBs. However, there was no significant consequence of alloying in the GB type and connectivity distribution. Furthermore, our results indicate that vacuum-deposited Al or Al-alloy thin films possess a strong <111> texture, and a characteristic GB distribution consisting of a significantly high fraction of low coincidence site lattice GBs (predominant ∑1 followed by ∑13b, ∑7, ∑21a, ∑31a and ∑19b in descending order) and a minor fraction of r-HAGBs.

Keywords

Grain boundaries Thin films Alloying Annealing Triple junction ACOM-TEM 

Notes

Acknowledgements

The authors are thankful to the Welch Foundation Grant (No. AX-1615) and Department of Defense Grant (No. 64756-RT-REP and 72489-RT-REP). RMC acknowledges the National Council for Science and Technology (Conacyt), Mexico, for the support provided through the Postdoctoral Scholarship Program.

References

  1. 1.
    Watanabe T (1984) An approach to grain-boundary design for strong and ductile polycrystals. Res Mech 11(1):47–84Google Scholar
  2. 2.
    Thaveeprungsriporn V, Was GS (1997) The role of coincidence-site-lattice boundaries in Creep of Ni-16Cr-9Fe at 360 C. MMTA 28(10):2101–2112CrossRefGoogle Scholar
  3. 3.
    Shimada M, Kokawa H, Wang Z, Sato Y, Karibe I (2002) Optimization of grain boundary character distribution for intergranular corrosion resistant 304 stainless steel by twin-induced grain boundary engineering. Acta Mater 50(9):2331–2341CrossRefGoogle Scholar
  4. 4.
    Kobayashi S, Tsurekawa S, Watanabe T, Palumbo G (2010) Grain boundary engineering for control of sulfur segregation-induced embrittlement in ultrafine-grained nickel. Scripta Mater 62(5):294–297CrossRefGoogle Scholar
  5. 5.
    Kobayashi S, Nakamura M, Tsurekawa S, Watanabe T (2011) Effect of grain boundary microstructure on fatigue crack propagation in austenitic stainless steel. JMatS 46(12):4254–4260Google Scholar
  6. 6.
    Kobayashi S, Takagi H, Watanabe T (2013) Grain boundary character distribution and texture evolution during surface energy-driven grain growth in nanocrystalline gold thin films. Philos Mag 93(10–12):1425–1442CrossRefGoogle Scholar
  7. 7.
    Gao Y, Ritchie R, Kumar M, Nalla R (2005) High-cycle fatigue of nickel-based superalloy ME3 at ambient and elevated temperatures: role of grain-boundary engineering. MMTA 36(12):3325–3333CrossRefGoogle Scholar
  8. 8.
    Thompson C (1992) Experimental and theoretical aspects of grain growth in thin films. Mater Sci Forum 245–258. Trans Tech PublGoogle Scholar
  9. 9.
    Watanabe T, Fujii H, Oikawa H, Arai K (1989) Grain boundaries in rapidly solidified and annealed Fe-6.5 mass% Si polycrystalline ribbons with high ductility. Acta Metall 37(3):941–952CrossRefGoogle Scholar
  10. 10.
    Watanabe T, Arai K-I, Yoshimi K, Oikawa H (1989) Texture and grain boundary character distribution (GBCD) in rapidly solidified and annealed Fe–6 5 mass% Si ribbons. Philos Mag Lett 59(2):47–52CrossRefGoogle Scholar
  11. 11.
    Garbacz A, Grabski M (1989) Modelling of CSL boundaries distribution in polycrystals. ScM 23(8):1369–1374Google Scholar
  12. 12.
    Zuo L, Watanabe T, Esling C (1994) A theoretical approach to grain boundary character distribution (GBCD) in textured polycrystalline materials. Z Metallkd 85(8):554–558Google Scholar
  13. 13.
    Singh VV, King AH, Dixit G (1997) Some further microstructural characteristics of face-centered cubic polycrystalline metal thin films. J Electron Mater 26(9):987–995CrossRefGoogle Scholar
  14. 14.
    Parajuli P, Mendoza-Cruz R, Santiago U, Ponce A, Yacamán MJ (2018) The evolution of growth, crystal orientation, and grain boundaries disorientation distribution in gold thin films. Cryst Res Technol 53(8):1–7CrossRefGoogle Scholar
  15. 15.
    Watanabe T (2011) Grain boundary engineering: historical perspective and future prospects. JMatS 46(12):4095–4115Google Scholar
  16. 16.
    Lejcek P (2010) Grain boundary segregation in metals. Springer Science & Business MediaGoogle Scholar
  17. 17.
    Raabe D, Herbig M, Sandlöbes S, Li Y, Tytko D, Kuzmina M, Ponge D, Choi P-P (2014) Grain boundary segregation engineering in metallic alloys: a pathway to the design of interfaces. Curr Opin Solid State Mater Sci 18(4):253–261CrossRefGoogle Scholar
  18. 18.
    Raabe D, Sandlöbes S, Millán J, Ponge D, Assadi H, Herbig M, Choi P-P (2013) Segregation engineering enables nanoscale martensite to austenite phase transformation at grain boundaries: a pathway to ductile martensite. Acta Mater 61(16):6132–6152CrossRefGoogle Scholar
  19. 19.
    Palumbo G, Aust K (1995) Solute effects in grain boundary engineering. Can Metall Q 34(3):165–173CrossRefGoogle Scholar
  20. 20.
    Tacikowski M, Grabski M, Driver J, Kobylanski A (1996) The effect of carbon and sulphur on the character of the grain boundary population in α-iron. Mater Sci Eng A 205(1–2):133–138CrossRefGoogle Scholar
  21. 21.
    Belluz R, Aust K (1975) Effect of solutes on preferred orientation in high-purity aluminum. Metall Trans A 6:219–220CrossRefGoogle Scholar
  22. 22.
    Parajuli P, Mendoza-Cruz R, Hurtado-Macias A, Santiago U, Yacamán MJ (2018) A direct observation of ordered structures induced by Cu segregation at grain boundaries of Al 7075 Alloys. Phys Status Solidi (a) 215(19):1–8Google Scholar
  23. 23.
    Rauch EF, Veron M (2014) Automated crystal orientation and phase mapping in TEM. Mater Charact 98:1–9CrossRefGoogle Scholar
  24. 24.
    Mackenzie J (1958) Second paper on statistics associated with the random disorientation of cubes. Biome 45(1–2):229–240Google Scholar
  25. 25.
    Déchamps M, Baribier F, Marrouche A (1987) Grain-boundaries: criteria of specialness and deviation from CSL misorientation. Acta Metall 35(1):101–107CrossRefGoogle Scholar
  26. 26.
    Zhou Y, Erb U, Aust K, Palumbo G (2003) The effects of triple junctions and grain boundaries on hardness and Young’s modulus in nanostructured Ni–P. Scripta Mater 48(6):825–830CrossRefGoogle Scholar
  27. 27.
    Vitos L, Ruban AV, Skriver HL, Kollar J (1998) The surface energy of metals. Surf Sci 411(1–2):186–202CrossRefGoogle Scholar
  28. 28.
    Dillamore I, Smallman R (1965) The stacking-fault energy of FCC metals. Philos Mag 12(115):191–193CrossRefGoogle Scholar
  29. 29.
    Humphreys FJ, Hatherly M (2012) Recrystallization and related annealing phenomena. ElsevierGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  • Prakash Parajuli
    • 1
  • Rubén Mendoza-Cruz
    • 1
  • Miguel José Yacamán
    • 1
  • Arturo Ponce
    • 1
    Email author
  1. 1.Department of Physics and AstronomyUniversity of Texas at San AntonioSan AntonioUSA

Personalised recommendations