Abstract
This paper presents the way of identifying the influence of the tolerance of model pumps (TYPE 2PWR-SE) construction on the total efficiency. The identification of sensitive control dimensions (Value /Tolerance) of examined pumps has been made by means of the multi-valued logic and inductive decision trees. In order to confirm the obtained results, multiple-valued logic trees have been used in the paper according to algorithms for the minimization of individual logic functions. What is more, a specific monotonicity of values of the most key parameters has been determined for the investigated set of pumps having individual specification numbers.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Francis J, Betts PL (1997) Modelling incompressible flow in a pressure relief valve. Proc Inst Mech Eng Part E: J Process Mech Eng 211(2/1997):83–93
Kollek W, Osiński P (2009) Modelling and design of gear pumps. Wydawnictwo PWr, Wrocław
Deptuła A (2012) Coefficient of the structure complexity for multi-valued decision logic trees, XLI Konf. Zast. Mat., Zakopane 2012, Inst. Mat. PAN, Warszawa
Kollek W, Osiński P (2009) Modelling and design of gear pumps. Wroclaw University of Technology Publishing House, Wrocław
Kollek W, Osiński P, Stosiak M, Wilczyński A, Cichoń P (2014) Problems relating to high-pressure gear micropumps. Arch Civil Mech Eng 14(1)
Kollek W, Radziwanowska U (2015) Energetic efficiency of gear micropumps. Arch Civil Mech Eng 15(1)
Osiński P, Deptuła A, Partyka MA (2013) Discrete optimization of a gear pump after tooth root undercutting by means of multi-valued logic trees. Arch Civil Mech Eng 13(4)
Osiński P (2013) High-pressure and low-fluctuation internal gear pumps. Wrocław University of Technology Publishing House, Wrocław
Osiński P, Kollek W (2013) Assessment of energetistic measuring techniques and their application to diagnosis of acoustic condition of hydraulic machinery and equipment. Arch Civil Mech Eng 13(3):167–172
Deptuła A, Osiński P, Partyka MA (2017) Identification of Influence of part tolerances of 3PWR-SE pump on its total efficiency taking into consideration multi-valued logic trees. Polish Maritime Res 24, 1(93)
Deptuła A (2014) Application of multi-valued weighting logical functions in the analysis of a degree of importance of construction parameters on the example of hydraulic valves. Int J Appl Mech Eng 19(3):539–548
Partyka MA (1983) Some remarks on the Quine – Mc Cluskey minimization algorithm of multiple- valued partial functions for design structures. In: 7th Inter. Cong. Log. Method. Phil. Sc., Salzburg, Austria
Kudźma S, Kudźma Z (2015) Refined model of passive branch damper of pressure fluctuations. J Theor Appl Mech 53(3)
Deptuła A, Osiński P (2017) The optimization of three-involute tooth outline with taking into consideration multi-valued logic trees. In: Book: Proceedings of the 13th international scientific conference, Springer International Publishing, pp 99–107
Deptuła A, Macek W, Partyka MA (2017) Assessing the damage importance rank in acoustic diagnostics of technical conditions of the internal combustion engine with multi-valued logical decision trees. In: II International conference of computational methods in engineering science CMES’17, exploitation and machine building, ITM Web Conf. 15, 05003
Deptuła D, Kunderman P, Osiński U, Radziwanowska R Włostowski (2016) Acoustic diagnostics applications in the study of technical condition of combustion engine. Arch Acoust 41(2):345–350
Deptuła A, Osiński P, Radziwanowska U (2016) Decision support system for identifying technical condition of combustion engine. Arch Acoust 41(3):449–460
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Deptuła, A., Osiński, P., Partyka, M.A. (2019). Identification of Influence of Part Tolerances of 2PWR-SE Pump on Its Total Efficiency Taking into Consideration Multi-valued Logic Trees. In: Rusiński, E., Pietrusiak, D. (eds) Proceedings of the 14th International Scientific Conference: Computer Aided Engineering. CAE 2018. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-04975-1_16
Download citation
DOI: https://doi.org/10.1007/978-3-030-04975-1_16
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-04974-4
Online ISBN: 978-3-030-04975-1
eBook Packages: EngineeringEngineering (R0)