Advertisement

Modeling of Fuel Cell SOFC

  • M. MankourEmail author
  • M. Sekour
Conference paper
Part of the Lecture Notes in Networks and Systems book series (LNNS, volume 62)

Abstract

Today, the development of devices of electrochemical conversion of energy to “high temperatures” Powerful and reliable fact appeal to different axs of research both technological and scientific. The expected progress on these devices requires conducting front of studies on the components as well as on their integration. The heart of these systems is the electrochemical cell to solid oxides whose structure is a multilayer complex behavior involving different areas of physics. The electrochemistry of solids, physico-chemistry of ceramics, the thermal or still the mechanics of materials are all areas to consider describing and analyzing properly the response of such systems. It is therefore essential to develop methods that are capable of understanding the behavior of electrochemical cells in their together taking into account the different couplings existing. In the field of fuel cells SOFC one of the important characteristics of the materials used as solid electrolytes is their ability to drive the ions at high temperature.

Keywords

Electrochemical solid oxides Physico-chemistry Fuel cells SOFC 

References

  1. 1.
    Steffen, Christopher J., Jr., Freeh, Joshua E., Larosiliere, Louis M., Off- Design Performance Analysis of a Solid Oxide Fuel Cell/Gas Turbine Hybrid for Auxiliary Aerospace Power, Third International Conference of Fuel Cell Science and Technology, May 23-25, 2005, FUELCELL2005- 74099Google Scholar
  2. 2.
    Srikar, V.T., Turner, K.T., Ie, T.Y.A., Spearing, S.M.: Structural design considerations for micro machined solid-oxide fuel cells. J. Power Sources (2004)Google Scholar
  3. 3.
    Yuan, J., Rokni, M., Sunden, B.: Three-dimensional computational analysis of gas and heat transport phenomena in ducts under for anode-supported solid oxide fuel cells. Int. J. Heat Mass Transf. (2003)Google Scholar
  4. 4.
    Suzuki, M., Fukagata, K., Shikazono, N., Kasagi, N.: Numerical analysis of temperature and potential distributions in Planar-Type SOFC. In: Thermal and Fluids Engineering Conference. Jeju- Korea (2005)Google Scholar
  5. 5.
    Damm, D.L., Fedorov, A.: Radiation heat transfer in SOFC materials and components. J. Power Sources (2005)Google Scholar
  6. 6.
    Daun, K.J., Beale, S.B., Liu, F., Smallwood, G.J.: Radiation heat transfer in planar SOFC electrolytes. J. Power Sources (2005)Google Scholar
  7. 7.
    Sedghisigrarchi, K., Feliachi, A.: Dynamic and Transient analysis of power distribution systems with fuel cells-Part I: fuel-cell dynamic model. IEEE Trans. Energy Convers. 19(2), 423–428 (2004)CrossRefGoogle Scholar
  8. 8.
    He, W.: Dynamic Simulation of Fuel-Cell Molten-Carbonate Systems. Delft Univ. Press, Delft (2000)Google Scholar
  9. 9.
    Rémi, S.: Contribution to the systemic study of energy devices electrochemical components. Formalism Graph Bond applied to fuel cells, batteries Lithium-Ion, Solar Vehicle, doctoral thesis. 2 April 2004Google Scholar
  10. 10.
    Schott, P.: ‘Document CEA internal/Alstom: Sizing of a fuel cell system CFMEP 400 kW for a transport application, NT DTEN N°2002/90 (2002)Google Scholar
  11. 11.
    Lachaize, J.: Study of strategies and structures of control for the control of energy systems to Fuel Cell (CAP) intended for the Traction. September 2004Google Scholar
  12. 12.
    Hatziadoniu, C.J., Lobo, A.A., Pourboghrat, F., Daneshdoost, M.: A simplified dynamic model of grid-connected fuel cell generators. IEEE Trans. Power Deliv. 17(2), 467–473 (2002)CrossRefGoogle Scholar
  13. 13.
    Freeh, J.E.: A presentation on solid oxide fuel cell/gas turbine hybrid systems for auxiliary power, center for advanced power system, April 19, 2005Google Scholar
  14. 14.
    Samuesen, S.: Turbo fuel cell report: fuel cell/gas turbine hybrid systems, National Fuel Cell Research Center, University of California, Irvine, CA (2004)Google Scholar
  15. 15.
    Theachichi, A.: Modeling and stability of a hybrid regulator of current: Application to converters for fuel cell. Doctoral thesis. University of Franche Comte (2005)Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Electrotechnical Engineering Laboratory, Department of Electrical Engineering, Faculty of TechnologyUniversity Dr. Moulay Tahar SaidaSaidaAlgeria

Personalised recommendations