Advertisement

Effect of Molybdate Anion Addition on Repassivation of Corroding Crevice in Austenitic Stainless Steel

  • Shun WatanabeEmail author
  • Tomohiro Sekiguchi
  • Hiroshi Abe
  • Yutaka Watanabe
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

In Japan, light water reactors are built on the seacoast because they use seawater as the final heatsink. Leakage of seawater from the condenser section of the reactor could lead to contamination of the reactor coolant, and stainless steels can be susceptible to crevice corrosion in chloride-contaminated water. Therefore, it is necessary to develop counter measures for suppressing the initiation of crevice corrosion and for repassivating the corroding crevice to maintain structural reliability. To accomplish this, first the effect of molybdate anion on suppressing the initiation of crevice corrosion on 316L stainless steel in chloride-contaminated water was evaluated by potentiostatic immersion tests. Next, the effect of molybdate anion addition on the repassivation of corroding crevices was also evaluated through potentiostatic immersion tests as a function of the concentration of chloride anion. Based on the results of these examinations, the beneficial effects of the presence of molybdate anion on the suppression of initiation and propagation of crevice corrosion were quantitatively evaluated in terms of critical potentials.

Keywords

Stainless steel Crevice corrosion Initiation potential Repassivation potential Molybdate anion 

Notes

Acknowledgements

A part of this study is achievements of “development of deactivation method of crevice corrosion and cleanup method inside crevice using unaggressive anion” in public offering research in April of 2015—March of 2017 of Chubu Electric Power Co., Inc., Nuclear Safety Research and Development Center. The authors would like to express their sincere appreciation to Chubu Electric Power Co., Inc.

References

  1. 1.
    H.P. Leckie, H.H. Uhlig, J. Electrochem. Soc. 113(12), 1262–1267 (1966)CrossRefGoogle Scholar
  2. 2.
    M. Rincón Ortíz, M.A. Rodríguez, R.M. Carranza, R.B. Rebak, Corros. Sci. 68, 72–83 (2013)CrossRefGoogle Scholar
  3. 3.
    M.J. Pryor, M. Cohen, J. Electochem. Soc. 100(5), 203–215 (1953)Google Scholar
  4. 4.
    K. Sugimoto, Y. Sawada, Corrosion 32(9), 347–352 (1976)CrossRefGoogle Scholar
  5. 5.
    JIS G 0592 Method of determining the repassivation potential for crevice corrosion of stainless steels (2002)Google Scholar
  6. 6.
    K. Aramaki, Ziryo-to-Kankyo, 56(7), 292–300 (2007)Google Scholar

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  • Shun Watanabe
    • 1
    Email author
  • Tomohiro Sekiguchi
    • 1
  • Hiroshi Abe
    • 1
  • Yutaka Watanabe
    • 1
  1. 1.Graduate School of EngineeringTohoku UniversityAoba-ku, SendaiJapan

Personalised recommendations