Advertisement

Exploring Nanoscale Precursor Reactions in Alloy 600 in H2/N2–H2O Vapor Using In Situ Analytical Transmission Electron Microscopy

  • M. G. Burke
  • G. BertaliEmail author
  • F. Scenini
  • S. J. Haigh
  • E. Prestat
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

Oxidation studies were performed on Alloy 600 in situ in high-temperature H2/N2 + H2O vapor mixture at 400 °C. The initial stages of preferential intergranular oxidation (PIO), shown to be an important precursor phenomenon for primary water stress corrosion cracking, have been successfully identified using the in situ approach. The behaviour of Alloy 600 was observed in real time using the Protochips environmental cell and analysed via analytical electron microscopy (AEM). Post in situ AEM analyses were compared with previous ex situ post-exposure characterization results obtained from bulk specimens, demonstrating good agreement. The in situ results confirmed the grain boundary migration and intergranular oxide formation in solution-annealed Alloy 600. The excellent agreement between the in situ and previous studies demonstrates that this approach can be used to investigate the initial stages of PIO relevant to nuclear power systems.

Keywords

Alloy 600 Stress corrosion cracking Preferential intergranular oxidation Diffusion-induced grain boundary migration Analytical electron microscopy In situ analytical transmission electron microscopy Energy dispersive X-ray spectroscopy 

Notes

Acknowledgements

MGB, GB and FS acknowledge the support of AREVA and the Engineering and Physical Sciences Research Council (EPSRC) EP/JO21172/1. SJH and EP acknowledge support of the Defence Threat Reduction Agency (HDTRA1-12-1-0013) and the EPSRC (EP/M022498/1 and EP/K016946/1). The authors acknowledge the UK Research Partnership Investment Funding that established the in situ analytical TEM capabilities, and the support from HM Government (UK) for the provision of the funds for the FEI Titan G2 80-200 200S/TEM.

References

  1. 1.
    RW Staehle, in Introduction to Initiation”, Workshop on Detection, Avoidance, Mechanisms, Modeling and Prediction of SCC Initiation in Water-Cooled Nuclear Reactor Plants, Beaune France, 7–12 Sept 2008Google Scholar
  2. 2.
    R. Killian, in Workshop on Detection, Avoidance, Mechanism, Modeling and Prediction of SCC Initiation in Water-Cooled Nuclear Reactor Plants, Beaune France, 7–12 Sept 2008Google Scholar
  3. 3.
    L. Fournier, O. Calonne, P. Combrade, P. Scott, P. Chou, R. Pathania, Grain boundary oxidation and embrittlement prior to crack initiation in Alloy 600 in PWR primary water, in Proceedings of the 15th International Symposium on Environmental Degradation of Materials in Nuclear Power System-Water Reactors (2001) TMSGoogle Scholar
  4. 4.
    T. Moss, G.S. Was, Accelerated stress corrosion crack initiation of alloys 600 and 690 in hydrogenated supercritical water. Met. Mat. Trans. 48A, 1613–1628 (2017)CrossRefGoogle Scholar
  5. 5.
    G. Bertali, F. Scenini, M.G. Burke, Advanced microstructural characterization of alloy 600 intergranular oxidation. Corr. Sci. 100, 474–483 (2015)CrossRefGoogle Scholar
  6. 6.
    G. Bertali, F. Scenini, M.G. Burke, The effect of residual stress on preferential intergranular oxidation of alloy 600. Corr. Sci. 101, 494–507 (2016)CrossRefGoogle Scholar
  7. 7.
    G. Bertali, Ph.D. Thesis, University of Manchester, 2016Google Scholar
  8. 8.
    N.J. Zaluzec, M.G. Burke, S.J. Haigh, M.A. Kulzick, X-ray energy dispersive spectrometry during in-situ liquid cell studies using an analytical electron microscope. Microsc. Microanal. 20, 323–329 (2014)CrossRefGoogle Scholar
  9. 9.
    X.L. Zhong, S. Schilling, N. J. Zaluzec, M.G. Burke, Novel sample preparation methodologies for in situ liquid cell analytical transmission electron microscopy, Microsc. Microanal. 22(6) (2016). doi: https://doi.org/10.1017/S1431927616011855 CrossRefGoogle Scholar
  10. 10.
    M.G. Burke, G. Bertali, E. Prestat, F. Scenini, S.J. Haigh, The application of in situ analytical transmission electron microscopy to the study of preferential intergranular oxidation in alloy 600. Ultramicroscopy 176, 46–51 (2017)CrossRefGoogle Scholar
  11. 11.
    B. Langelier, S.Y. Persaud, A. Korinek, T. Casagrande, R.C. Newman, G.A. Botton, Effects of boundary migration and pinning particles on intergranular oxidation revealed by 2D and 3D analytical electron microscopy. Acta Mat. 131, 280–295 (2017)CrossRefGoogle Scholar
  12. 12.
    R.W. Balluffi, J.W. Cahn, Mechanism for diffusion induced grain boundary migration. Acta Met. 29, 493–500 (1980)CrossRefGoogle Scholar
  13. 13.
    G. Bertali, M.G. Burke, F. Scenini, N. Huin, The effect of temperature on the preferential intergranular oxidation susceptibility of alloy 600, Met. Mat. Trans (in review)Google Scholar

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  • M. G. Burke
    • 1
  • G. Bertali
    • 1
    Email author
  • F. Scenini
    • 1
  • S. J. Haigh
    • 1
  • E. Prestat
    • 1
  1. 1.Material Performance CentreThe University of ManchesterManchesterUK

Personalised recommendations