Advertisement

An Innovative Design and Simulation of Transom Type Venturi Cooling Design for High-Power LED Headlamp

  • Maw-Tyan Sheen
  • Qian-ting Wang
Conference paper
Part of the Smart Innovation, Systems and Technologies book series (SIST, volume 129)

Abstract

This research an innovative window type Venturi cooling system to help reduce the high power LED emitting heat on working. It uses lamp-shape heat sink base that is coated by aluminum nitride (AlN) ceramics to be an insulation layer which can reduce the damage of emanating heat and promote the working hours of high power LED. It is obviously seen that the force convection contributes a lot on heat dissipation when vehicles running. The record shows that the highest temperature comes to 96.4 °C, 93.3 °C and 89.8 °C on the high power LED headlamps of 85 W, 80 W and 100 W separately without the convection window design. The other record shows that the temperature comes to 74.6 °C, 73.7 °C and 64.8 °C on the same lamps but with cooling down window embedded. The effective cooling down temperature is 21.6 °C, 19.8 °C and 25 °C. The heat dissipation performance contributes 22.61%, 21% and 27.83%. By the analysis of finite elements on window type Venturi system shows that experiments data coincides with theory assumption. This project absolutely shows that an innovative window type Venturi cooling system is highly effective on heat dissipation and can provide more competitive high power LED products in the market.

Keywords

High power LED headlamp Aluminum nitride (AlN) Venturi cooling device Force convection F.E.M 

Notes

Acknowledgments

This work was supported by The Ministry of Industry and Information Technology (2016-755-63)

References

  1. 1.
    Gu, Y., Narendran, N., Freyssinier, J.P.: White LED performance. In: Proceedings of SPIE, vol. 5530, pp. 507–514 (2004)Google Scholar
  2. 2.
    Park, J., Shin, M., Lee, C.C.: Measurement of temperature profiles on visible light-emitting diodes by use of a nematic liquid crystal and an infrared laser, Optics Lett. 29, 2656–2658 (2004)Google Scholar
  3. 3.
    Niki, I., Narukawa, Y., Morita, D., Sonobe, S.Y., Mitani, T., Tamaki, H., Murazaki, Y., Yamada, M., Mukai, T.: White LEDs for solid state lighting. In: Proceedings of SPIE, vol. 5187, pp. 1–9 (2004)Google Scholar
  4. 4.
    Shatalove, M., Chitnis, A., Yadav, P., Hasan, M.F., Khan, J., Adivarhan, V., Maruska, H.P., Sun, W.H., Khan, M.A.: Thermal analysis of flip-chip packaged 280 nm nitride-based deep ultraviolet light-emitting diodes. Appl. Phys. Lett. 86, 201109 (2005)Google Scholar
  5. 5.
    Cheng, Q.: Thermal management of high-power white LED package. In: IEEE, 8th International Conference on Electronic Packaging Technology, Shanghai, China, pp. 1–5, 14–17 August 2007Google Scholar
  6. 6.
    Zhang, Z.: LED car headlights of the heat analysis. The National University of Successful Master’s Thesis (2008)Google Scholar
  7. 7.
    Robert, S., Metz, E., Setauket, N.Y.: Heat-dissipating method and device for LED display. United States Patent 5,173,839, 22 December 1992Google Scholar
  8. 8.
    Hochstein, P.A., Troy, M.: LED Lamp Assembly with Means to Conduct Heat Away from the LEDs, United States Patent 6,045,240, 4 April 2000Google Scholar
  9. 9.
    Azar, K., Mandrone, C.D.: Effect of pin fin density of the thermal performance of Unshrouded Pin Fin HeatSinks. In: Ninth Annual IEEE (1995)Google Scholar
  10. 10.
    Li, J., Yanga, Q., Niu, P., Jin, L., Meng, B., Li, Y., Xiao, Z., Zhang, X.: Analysis of thermal field on integrated LED light source based on COMSOL multi-physics finite element simulation. Physics Procedia 22, 150–156 (2011)CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.School of Mechanical and Automotive EngineeringFujian University of TechnologyFuzhouChina

Personalised recommendations