Advertisement

Environmentally Friendly Method of Production of Nanocomposites and Nanomembranes

  • Anatoly Belous
  • Vitali Saladukha
  • Siarhei Shvedau
Chapter

Abstract

This ‘finishing stroke’ chapter of the book is conceived with a view of “green” applications, pertaining to the discovery in 1974 by the then rather young Belarusian scholar S. Ushirenko of the effects of super-deep permeation (SDP). One of the co-authors of this book, Professor A. Belous, in collaboration with S. Ushirenko for more than 40 years, was probing the intricacies of the SDP effect, applicable to space-purposed integrated circuits. By courtesy of S. Ushirenko and his associates, in this chapter we use the textual and graphical materials of the original article [1], published in the authoritative journal Scientific Israel – Technological Advances, with the author’s minimal corrections.

References

  1. 1.
    O. Figovsky, D. Beilin, S. Usherenko, P. Kudryavtsev, Environmental friendly method of production of nanocomposites and nanomembranes (Polymate Ltd. - Israel Nanotechnology Research Center, Migdal HaEmek). Israel Holon Institute of Technology, Holon, Israel fgovsky@gmail.comGoogle Scholar
  2. 2.
    S.M. Usherenko, The phenomenon of superdeep penetration. J. Sci. Israel – Technol. Adv 8(1,2), 83–94 (2006)Google Scholar
  3. 3.
    S.M. Usherenko, Modern notions of the effect of superdeep penetration. J. Phys. Thermophys 75(3), 753–770 (2002)CrossRefGoogle Scholar
  4. 4.
    O.V. Roman, S.K. Andilevko, et al., Effect of superdeep penetration. State of the art and prospects. J. Eng Phys. Thermophys 75(4), 997–1012 (2002)CrossRefGoogle Scholar
  5. 5.
    S.M. Usherenko, L.G. Korshunov, et al., Multifactor experiments under superdeep- penetration conditions. J. Eng Phys Thermophys 75(6), 12491253 (2002)Google Scholar
  6. 6.
    G.G. Cherny, The gear of anomalous resistance at motion of bodies in solid media, Reports of Academy of Sciences of USSR, The Theory of Elasticity, 292, 6, 1987, pp. 1324–1328, (in Russian)Google Scholar
  7. 7.
    S.S. Grigorian, About the nature of the “superdeep” penetration of firm microparticles in solid materials, Reports of the Academy of Sciences of USSR, Mechanics, 292, 6, 1987, pp. 1319–1322, (in Russian)Google Scholar
  8. 8.
    A.E. Rakhimov, Qualitative model of the superdeep penetration, Messages of the Moscow University. Math. Mech., Series 1, 5, 72–74 (1994). (in Russian)Google Scholar
  9. 9.
    L.G. Korshunov, N.L. Chernenko, About the mechanism and conditions of realization of effects of superdeep penetration of the accelerated particles in metals. Phys. Metals Metall. Sci 101(6), 660–667 (2005). (in Russian)Google Scholar
  10. 10.
    A. Aleksentseva, A. Krivchenko, Analysis of the conditions for ultradeep penetration of powder particles into a metallic matrix. Tech. Phys 43(7), 859–860 (1998). (in Russian)CrossRefGoogle Scholar
  11. 11.
    P.V. Makarov, Model of the superdeep penetration of firm microparticles into metals. Phys. Mezomech 9(3), 61–70 (2006). (in Russian)MathSciNetGoogle Scholar
  12. 12.
    G.P. Cherepanov, An analysis of two models of superdeep penetration. Eng. Fract. Mech. 53(3), 399–423(25) (1996)CrossRefGoogle Scholar
  13. 13.
    S.P. Kiselev, V.P. Kiselev, Superdeep penetration of particles into a metal target. Int. J. Impact Eng 27(2), 135–152(18) (2002)CrossRefGoogle Scholar
  14. 14.
    V.L. Kolmogorov, A.G. Zalazinskij, et al., About the superdeep penetration of a particle into elasto-plastic medium, Collection of Materials. VII Zababahin Scientific Readings, Snezhinsk, 1–17 (2003). (in Russian)Google Scholar
  15. 15.
    O. Naimark, F.A. Collombet, et al., Super-deep penetration phenomena as resonance excitation of self-keepinq spall failure in impacted materials. Le Journal de Physique IV 07(C3), 773–778 (1997)Google Scholar
  16. 16.
    A.E. Kheifets, V.I. Zeldovich, et.al., The shock-wave model of the effect of superdeep penetration of powder particles into metallic materials, E-MRS Fall Meeting 2003 (www.science24/com/conferences)
  17. 17.
    A. Sivkov, A possible mechanism of “superdeep” particle penetration into a solid target. Tech. Phys. Lett. 27(8), 692–694(3) (2001)CrossRefGoogle Scholar
  18. 18.
    S. Usherenko, Conditions of superdeep penetration and creation of process of hardening of tool steels by a high-speed flow of powder materials The Thesis on Competition of a Scientific degree of Cand. Tech. Sci. Minsk. The Belarus Polytechnic Institute, 308, 1983. (in Russian)Google Scholar
  19. 19.
    V.I. Zeldovich et al., Structural changes in iron-nickel alloys caused by action of high-speed flow of powder particles. Effects of impact loading. Phys. Metals Metall. Sci 91(6), 72–79 (2001). (in Russian)Google Scholar
  20. 20.
    V. Homskaja et al., Structural transformations and effects of localization of deformation into copper under action of a high-speed flow of powder microparticles. News Russ. Acad. Sci. Phys. Ser 70(7), 1054–1056 (2006). (in Russian)Google Scholar
  21. 21.
    L.V. Altshuler, S.K. Andrilevko, et al., About model of the “superdeep” penetration, Pis ‘maGoogle Scholar
  22. 22.
    S.M. Usherenko, O.I. Koval, et al., Estimation of the energy expended for superdeep penetration. J. Eng. Phys. Thermophys 77(3), 641–646 (2004). pp. 641–646CrossRefGoogle Scholar
  23. 23.
    V.D. Rusov, S.M. Usherenko, et al., The simulation of dissipative structures and concentration waves of point defects in the open nonlinear physical system “metal + loading + irradiation, Questions of a Nuclear Science and Technique, Ukraine, National Centre of Science, Kharkov Physicotechnical Institute, 4, 2001, pp. 3–8,(in Russian)Google Scholar
  24. 24.
    J. Owsik, K. Jach, S. Usherenko, Y. Usherenko, O. Figovsky, V. Sobolev, The physics of superdeep penetration Phenomen. J. Tech. Phys. 49(1), 3–29 (2008)Google Scholar
  25. 25.
    S. Usherenko, A. Granberg, V. Sobolev, High-energy physical effects at formation of composite materials. J. Sci. Israel- Technol. Adv 12(1) (2010)Google Scholar
  26. 26.
    V.A. Babeshko, The phenomenon of localization of wave processes and resonances. Educ. J. Soros 7(11), 134–137 (2001). (in Russian)zbMATHGoogle Scholar
  27. 27.
    V.V. Sobolev, S.M. Usherenko, Shock-wave initiation of nuclear transmutation of chemical elements. J. Phys. IYFrance 134, 977–982 (2006)Google Scholar
  28. 28.
    J. Owsik, S. Usherenko, SDP technology for “green” technology of metallic reinforced nanocomposites, Proceeding of the NATO Advanced Research Workshop on Environmental and Biological Risks of Hybrid Organic-Silicon Nanodevices, St. Petersburg, Russia, 18–20 June 2008. pp. 31–54Google Scholar
  29. 29.
    S. Usherenko, Method of strengthening tool material by penetration of reinforced particles. US Patent, 7897204B2, 201' 1Google Scholar
  30. 30.
    O. Figovsky, S. Usherenko, et al., The creation of metal composite materials, The Physics and technics of high-energy processing of materials, vol 218–235 (Art-Press, Dnepropetrovsk, 2007), pp. 218–235 (in Russian)Google Scholar
  31. 31.
    O. Figovsky, S. Usherenko, Nanocomposites Prepared by SDP Method: The Physics of Superdeep Penetration Phenomenon. J. Sci. Israel- Technol Adv 11(3), 59–73 (2009)Google Scholar
  32. 32.
    S. Usherenko, V. Nozdrin, et al., Motion and deceleration eof explosively accelerated solid particles in a metallic target. Int. J. Heat. Mass Transfer 37(15), 2367–2375 (1994)CrossRefGoogle Scholar
  33. 33.
    U.A. Glasmacher et al., Phase Transitions in Solids Stimulated by Simultaneous Exposure to High Pressure and Relativistic Heavy Ions. Phys. Rev. Lett. 96, 195701 (2006)CrossRefGoogle Scholar
  34. 34.
    S. Usherenko, O. Figovsky, et al., Production of the new metalcomposite materials by metod of superdeep penetration. J. Sci. Israel- Technol. Adv 9(1), 28–32 (2007)Google Scholar
  35. 35.
    S. Usherenko, O. Figovsky, Novel environment friendly method of preparing nanoreinforced composites based on metallic,s ceramic and polymer matrixes- superdeep penetration, silicon versus carbon, Proceeding of the NATO Advanced Research Workshop on Environmental and Biological Risks of Hybrid Organic-Silicon Nanodevices, St. Petersburg, Russia, 18–20 June 2008. pp. 31–54Google Scholar
  36. 36.
    S.M. Usherenko, et al., Flows of “galactic “ions is arising at collision of the dust clots with protective envelopments , 2nd Belorussian Space Congress, Materials of a Congress , Minsk, OIPINAN Belarus, 2005, pp. 33–38 (in Russian)Google Scholar
  37. 37.
    O.V. Roman, O.A. Dybov, G.S. Romanov, S.M. Usherenko, Damage of integrated by high- velocity microparticles penetrating thick-wall obstacles. J. Tech. Lett 31(I), 46–47 (2005)CrossRefGoogle Scholar
  38. 38.
    O.A. Dubov, Technique of foils and its application at recording processes of the penetration, Dynamic reorganization of structure of materials (The Collective Monograph, Minsk, 2000), pp. 5–21 ( in Russian)Google Scholar
  39. 39.
    O. Figovsky, S. Usherenko, Composite materials prepared by SDP-method: the physics of superdeep penetration. Nanotechnics 3(19), 27–37 (2009). (in Russian)Google Scholar
  40. 40.
    S. Usherenko, O. Figovsky, Superdeep penetration as the new: physical tool for creation of composite materials. Adv. Mater. Res. 47-50, 395–402 (2008). 40. O. Figovsky, E. Gotlib, et.al., Super deep penetration - new method of nanoreinforced composites producing based on polymer matrixes. J. Sci. Israel Technol. Advant. 14(1), 74–78 (2012)CrossRefGoogle Scholar
  41. 41.
    E. Gotlib, O. Figovsky, et al., Influence of mixing method of modified wollastonite with rubbers based on SRI-3 on their structure,. Newsletter of the Kazan State Technological University. No 15, 2011, pp. 141–145Google Scholar
  42. 42.
    P. Apel, Track membrane production. Padiat. Meus 37(16), 559–566 (2001)Google Scholar
  43. 43.
    V.V. Shirkova, S.P. Tretyakova, The ways of track membranes manufacturing. Padiat. Meus (15) 28(1–6), 791–798 (1997)Google Scholar
  44. 44.
    H. Koerber, Method for manufactory of mat and rough, laminar, ribbon-shaped or fibrous polymeric products with a stream of particles. US Patent 4960430 A, 1990Google Scholar
  45. 45.
    O. Figovsky, E. Gotlib, et al., Method of manufacturing a track membrane, US Patent 8980148 B2, 2015Google Scholar
  46. 46.
    O. Figovsky, E. Gotlib, et al., The production of polymer tracking membranes by super deep penetration method. J. Sci. Israel Technol. Advant 14(3), 120–124 (2012)Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Anatoly Belous
    • 1
  • Vitali Saladukha
    • 1
  • Siarhei Shvedau
    • 1
  1. 1.IntegralMinskBelarus

Personalised recommendations