Power Optimization Method of Magnetic Coupling Resonant Wireless Energy Transmission System
Magnetic coupled resonant wireless energy transmission technology is a way of wireless energy transmission. In the field of magnetic coupled resonant wireless energy transmission system, the distance between the transmitting coil and the receiving coil is too large and the position is fixed. The system is in the state of under coupling, which causes the system output power to be too small. The case of adding the relay coil between the transmitting coil and the receiving coil is proposed to improve the output power. Considering that the introduction of the relay coil may make the system’s charging state transition from under coupling state to over coupling state directly, the frequency splitting phenomenon is suppressed by adjusting the position of the relay coil, the angle of the rotating relay coil, the output power before and after the measures is changed. The simulation experiment shows that the measures of increasing the relay coil and taking suppression of frequency division to restrain the frequency can greatly improve the output power.
KeywordsWireless power transmission Magnetic coupling resonance Relay coil Suppression of frequency splitting
This work was supported by National Natural Science Foundation of China (No. 61501106), Science and Technology Foundation of Jilin Province (No. 20180101039JC and JJKH20170102KJ).
- 1.Liu, Z., Chen, Z., Lin, X., et al.: Review of research on magnetic coupling resonant wireless power transmission. J. Nanjing Univ. Inf. Sci. Technol. (Nat. Sci. Ed.) 9(1), 1–7 (2017)Google Scholar
- 2.Wu, W., Lu, Z., Zhang, H., et al.: Research on dynamic capacity increase and double-circuit capacity increase strategy for buried power cable. J. Northeast. Dianli Univ. 36(5), 7–12 (2016)Google Scholar
- 3.Teng, Z., Xu, M., Zhang, L.: Nodes deployment in wireless sensor networks based on improved reliability virtual force algorithm. J. Northeast. Dianli Univ. 36(2), 86–89 (2016)Google Scholar
- 4.Liang, K., Wang, J.: A wire structure for making high Q resonant magnetic coupled wireless transmission coils. J. Wuhan Univ. (Eng. Ed.) 48(1), 97–101 (2015)Google Scholar
- 5.Khan, S., Choi, G.: Analysis and optimization of four-coil planar magnetically coupled printed spiral resonators. Sensors 16(8), 12–19 (2016)Google Scholar
- 8.Yang, M., Huang, B., Jiang, B., et al.: Real-time prediction for wind power based on kalman filter and suport vector mahines. J. Northeast. Dianli Univ. 37(2), 45–51 (2017)Google Scholar
- 9.Li, X., Gong, L., Li, Y.: The influence of coil orientation on the performance of magnetically coupled resonant wireless power transmission system. Sci. Technol. Eng. 17(26), 62–68 (2017)Google Scholar
- 11.Xue, C., Cheng, Z., Zhu, H., et al.: Topology optimization of fault tolerant target monitoring for energy harvesting wireless sensor network. J. Netw. Intell. 2(4), 310–321 (2017)Google Scholar