Advertisement

Analysis of Analog Comparators Using a 6-Bit Flash ADC Architecture

  • Farhana BegumEmail author
  • Smita Sarma
  • Sandeep Mishra
  • Anup Dandapat
Conference paper
Part of the Lecture Notes on Data Engineering and Communications Technologies book series (LNDECT, volume 26)

Abstract

This paper is based on the design of a 6-bit, 2.5 GS/s flash analog-to-digital converter (ADC). Lower power consumption is a prime objective in this paper. As analog comparators are the basic building blocks of any ADC, this work makes an insight into static and dynamic latched analog comparators and also draws a comparison between different works based on various parameters. Thereafter, it uses the optimized design amongst these comparators for flash ADC design. Power-delay characteristics as well as noise parameters such as offset voltage and kickback noise of the comparators are calculated keeping 1 V supply and a detailed analysis is done. Simulations are made in CADENCE using 45 nm CMOS technology yielding a SNDR of 57.7 dB, SFDR of 61 dB and FoM of 15 fJ/conv-step at Nyquist frequency of 2.5 GHz with an input frequency of 20 MHz and supply voltage 1 V. The power consumption is seen to be 2.4 mW with INL and DNL of 0.4 LSB and 0.2 LSB at the sampling frequency of 2.5 GS/s.

Keywords

Differential-non-linearity (DNL) Figure-of-merit (FoM) Integrated-non-linearity (INL) Spurious-free-dynamic-range (SFDR) Signal-to-noise-distortion-ratio (SNDR) 

References

  1. 1.
    Song, Y., Xue, Z., Xie, Y., Fan, S., Geng, L.: A 0.6-V 10-bit 200-kS/s fully differential SAR ADC with incremental converting algorithm for energy efficient applications. IEEE Trans. Circuits Syst. I 63, 449–458 (2016)CrossRefGoogle Scholar
  2. 2.
    Tsai, T., Tai, H.Y., Tsai, P.Y., Tsai, C.H., Chen, H.S.: An 8 bit 700 MS/s 1 b/Cycle SAR ADC using a delay-shift technique. IEEE Trans. Circuits Syst. 63, 683–692 (2016)CrossRefGoogle Scholar
  3. 3.
    Jayazkumar, A., Vishnu, K.: A 7-bit 500-MHz flash ADC. In: 2014 First International Conference on Computational Systems and Communications, pp. 75–79 (2014)Google Scholar
  4. 4.
    Weaver, S., Hershberg, B., Knierim, D., Moon, U.K.: A 6b stochastic flash analog-to-digital converter without calibration or reference ladder. In: Proceedings of IEEE ASSCC Digest of Technical Papers, pp. 373–376 (2008)Google Scholar
  5. 5.
    Daly, D., Chandrakasan, A.: A 6b 0.2-to-0.9 V highly digital flash ADC with comparator redundancy. In: Proceedings of IEEE ISSCC Digest of Technical Papers, pp. 554–635 (2008)Google Scholar
  6. 6.
    He, J., Zhan, S., Chen, D., Geiger, R.L.: Analyses of static and dynamic random offset voltages in dynamic comparators. IEEE Trans. Circuits Syst. I 56(5), 911–919 (2009)MathSciNetCrossRefGoogle Scholar
  7. 7.
    Ellen, P.E.: CMOS Analog Circuit Design, pp. 3–42. Oxford University, New York (2006)Google Scholar
  8. 8.
    Johnson, M.G.: Static high speed comparator. US5488321 A (1995)Google Scholar
  9. 9.
    Wicht, B., Nirschl, T., Schmitt-Landsiedel, D.: Yield and speed optimization of a latch type voltage sense amplifier. IEEE J. Solid State Circuits 39, 1148–1158 (2004)CrossRefGoogle Scholar
  10. 10.
    Kobayashi, T., Nogami, K., Shirotori, T., Fujimoto, Y.: A current controlled latch sense amplifier and a static power saving input buffer for low-power architecture”. IEEE J. Solid State Circuits 28, 523–552 (1993)CrossRefGoogle Scholar
  11. 11.
    Weaver, S., Hershberg, B., Moon, U.K.: Digitally synthesized stochastic flash ADC using only standard digital cells. IEEE Trans. Circuits Syst. I 61(1), 84–91 (2013)CrossRefGoogle Scholar
  12. 12.
    Daly, D., Chandrakasan, A.: A 6b 0.2-to-0.9 V highly digital flash ADC with comparator redundancy. In: Proceedings of IEEE ISSCC Digest Technical Papers, pp. 554–635, February 2008Google Scholar
  13. 13.
    Schienkel, D., Mensink, E., Kiumperink, E., Tuijl, V., Nauta, B.: A double tail latch type voltage sense amplifier with 18 ps set up+hold time. In: International Solid State Conference, pp. 314–315 (2007)Google Scholar
  14. 14.
    Miyahara, M., Asada, Y., Daehwa, P., Matsuzawa, A.: A low-noise self-calibrating dynamic comparator for high-speed ADCs. In: IEEE ASSCC, pp. 269–272 (2008)Google Scholar
  15. 15.
    Jeon, H., Kim, Y.B.: A novel low power, low offset and high speed CMOS dynamic latched comparator. Analog. Integr. Circuit Signal Process. 70, 337–346 (2012)CrossRefGoogle Scholar
  16. 16.
    Mashadi, S.B., Lotfi, R.: Analysis and design of a low voltage low power double tail comparator. IEEE Trans. Very Large Scale Integr. (VLSI) 22, 343–352 (2014)CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Farhana Begum
    • 1
    Email author
  • Smita Sarma
    • 1
  • Sandeep Mishra
    • 2
  • Anup Dandapat
    • 1
  1. 1.Department of Electronics and Communication EngineeringNational Institute of Technology MeghalayaShillongIndia
  2. 2.Department of Electronics and Communication EngineeringIndian Institute of Information Technology PuneSudumbareIndia

Personalised recommendations