Advertisement

Nanocomposite Materials Based on TiO2/Clay for Wastewater Treatment

  • Soulaima Chkirida
  • Nadia Zari
  • Abou El Kacem Qaiss
  • Rachid BouhfidEmail author
Chapter
Part of the Nanotechnology in the Life Sciences book series (NALIS)

Abstract

The increase of global populations and rapid industrialization goes hand in hand with the intensification of the pressure of water supplies. Consequently, an extensive remediation is required as soon as possible before it would get worst in the future decades. In this regard, an extreme attention has been drawn toward the use of nanotechnology because of its effectiveness in using nanomaterials and nanostructured hybrid materials for water purification. Cotemporally, it reduces the use of chemicals and impinge on the environment.

In this chapter, we shall emphasize the different materials used in water purification laying stress on the advantages and multifunctions of the bionanocomposite and clays in the adsorption process as well as the dioxide of titanium particles in the photocatalysis, not to forget highlighting their synergistic assembling in the decontamination of water.

References

  1. Abollino O, Aceto M, Malandrino M et al (2003) Adsorption of heavy metals on Na-montmorillonite. Effect of pH and organic substances. Water Res 37:1619–1627PubMedGoogle Scholar
  2. Ahmed S, Rasul MG, Brown R, Hashib MA (2011) Influence of parameters on the heterogeneous photocatalytic degradation of pesticides and phenolic contaminants in wastewater: a short review. J Environ Manage 92:311–330PubMedGoogle Scholar
  3. Akpan UG, Hameed BH (2010) The advancements in sol-gel method of doped-TiO2 photocatalysts. Appl Catal A 375:1–11Google Scholar
  4. Anderson C, Bard AJ (1995) An improved photocatalyst of TiO2/SiO2 prepared by a sol-gel synthesis. J Phys Chem 99:9882–9885Google Scholar
  5. Anpo M (2000) Use of visible light. Second-generation titanium oxide photocatalysts prepared by the application of an advanced metal ion-implantation method. Pure Appl Chem 72:1787–1792Google Scholar
  6. Arimitsu N, Nakajima A, Kameshima Y et al (2007) Preparation of cobalt-titanium dioxide nanocomposite films by combining inverse micelle method and plasma treatment. Mater Lett 61:2173–2177Google Scholar
  7. Babelon P, Dequiedt AS, Mostefa-Sba H et al (1998) SEM and XPS studies of titanium dioxide thin films grown by MOCVD. Thin Solid Films 322:63–67Google Scholar
  8. Bandara J, Hadapangoda CC, Jayasekera WG (2004) TiO2/MgO composite photocatalyst: the role of MgO in photoinduced charge carrier separation. Appl Catal B 50:83–88Google Scholar
  9. Bergaya F, Lagaly G (2006) General introduction: clays, clay minerals, and clay science. In: Developments in clay science. Elsevier, Amsterdam, pp 1–18Google Scholar
  10. Bhattacharyya A, Kawi S, Ray MB (2004) Photocatalytic degradation of orange II by TiO2 catalysts supported on adsorbents. Catal Today 98:431–439Google Scholar
  11. Bickley RI, Gonzalez-Carreno T, Lees JS et al (1991) A structural investigation of titanium dioxide photocatalysts. J Solid State Chem 92:178–190Google Scholar
  12. Bineesh KV, Kim DK, Kim MIL, Park DW (2011) Selective catalytic oxidation of H2S over V2O5 supported on TiO2-pillared clay catalysts in the presence of water and ammonia. Appl Clay Sci 53:204–211Google Scholar
  13. Blackburn RS, Richard S (2005) Biodegradable and sustainable fibres. Woodhead Publishing in association with the Textile InstituteGoogle Scholar
  14. Bleiman N, Mishael YG (2010) Selenium removal from drinking water by adsorption to chitosan – clay composites and oxides: batch and columns tests. J Hazard Mater 183:590–595PubMedGoogle Scholar
  15. Bradley DC (2001) Alkoxo and aryloxo derivatives of metals. Academic Press, San DiegoGoogle Scholar
  16. Callister W, Rethwisch D (2007) Materials science and engineering. Materials Science and Engineering 94.  https://doi.org/10.1016/0025-5416(87)90343-0Google Scholar
  17. Dambournet D, Belharouak I, Amine K (2010) Tailored preparation methods of TiO2 Anatase, rutile, brookite: mechanism of formation and electrochemical properties. Chem Mater 22:1173–1179Google Scholar
  18. Darder M, Aranda P, Ruiz-Hitzky E (2007) Bionanocomposites: a new concept of ecological, bioinspired, and functional hybrid materials. Adv Mater 19:1309–1319Google Scholar
  19. Dent AJ, Ramsay JDF, Swanton SW (1992) An EXAFS study of uranyl ion in solution and sorbed onto silica and montmorillonite clay colloids. J Colloid Interface Sci 150:45–60Google Scholar
  20. Devi RS, Venckatesh DR, Sivaraj DR (2014) Synthesis of titanium dioxide nanoparticles by sol-gel technique. Int J Innov Res Sci Eng Tech 03:15206–15211Google Scholar
  21. Djurišić AB, Leung YH, Ching Ng AM (2014) Strategies for improving the efficiency of semiconductor metal oxide photocatalysis. Mater Horiz 1:400–410Google Scholar
  22. El-Sheikh AH, Newman AP, Al-Daffaee H et al (2004) Deposition of anatase on the surface of activated carbon. Surf Coat Tech 187:284–292Google Scholar
  23. Grim RE (1930) Clay mineralogy: the clay mineral composition of soils and clays is providing an understanding of their properties. Science 135(3507):890–898Google Scholar
  24. Guggenheim PACS (2001) Clays and clay minerals. National Academy of Sciences--National Research CouncilGoogle Scholar
  25. Herrmann J (1999) Heterogeneous photocatalysis: fundamentals and applications to the removal of various types of aqueous pollutants. Catal Today 53:115–129Google Scholar
  26. Higarashi MM, Jardim WF (2002) Remediation of pesticide contaminated soil using TiO2 mediated by solar light. Catal Today 76:201–207Google Scholar
  27. Hirai T, Suzuki K, Komasawa I (2001) Preparation and photocatalytic properties of composite CdS nanoparticles-titanium dioxide particles. J Colloid Interface Sci 244:262–265Google Scholar
  28. Hoffmann MR, Martin ST, Choi W, Bahnemann DW (1995) Environmental applications of semiconductor photocatalysis. Chem Rev 95:69–96Google Scholar
  29. Hussain F, Hojjati M, Okamoto M, Gorga RE (2006) Review article: polymer-matrix nanocomposites, processing, manufacturing, and application: an overview. J Comp Mater 40:1511–1575Google Scholar
  30. Inagaki S, Fukushima Y, Miyata M (1995) Inclusion polymerization of isoprene in the channels of sepiolite. Res Chem Intermed 21:167–180Google Scholar
  31. Inoue S, Muto A, Kudou H, Ono T (2004) Preparation of novel titania support by applying the multi-gelation method for ultra-deep HDS of diesel oil. Appl Catal A 269:7–12Google Scholar
  32. Kara M, Yuzer H, Sabah E, Celik MS (2003) Adsorption of cobalt from aqueous solutions onto sepiolite. Water Res 37:224–232PubMedGoogle Scholar
  33. Kim KD, Kim HT (2002) Synthesis of titanium dioxide nanoparticles using a continuous reaction method. Colloid Surf A 207:263–269Google Scholar
  34. Kim BH, Lee JY, Choa YH et al (2004) Preparation of TiO2 thin film by liquid sprayed mist CVD method. Mater Sci Eng B Adv 107:289–294Google Scholar
  35. Kirk-Othmer (2007) Bionanocomposites. In: Encyclopedia of chemical technology. Wiley & Sons, Inc, Hoboken, pp 1–28Google Scholar
  36. Kobayakawa K, Nakazawa Y, Ikeda M et al (1990) Influence of the density of surface hydroxyl-groups on Tio2 photocatalytic activities. Phys Chem Chem Phys 94:1439–1443Google Scholar
  37. Konta J (1995) Clay and man: clay raw materials in the service of man. Appl Clay Sci 10:275–335Google Scholar
  38. Lee S, Nishida K, Otaki M, Ohgaki S (1997b) Photocatalytic inactivation of phage Qβ by immobilized titanium dioxide mediated photocatalyst. Water Sci Technol 35(11–12):101–106Google Scholar
  39. Lee JH, Song DI, Jeon YW (1997a) Adsorption of organic phenols onto dual organic cation montmorillonite from water. Sep Sci Technol 32:1975–1992Google Scholar
  40. Lee YC, Yang JW (2012) Self-assembled flower-like TiO2 on exfoliated graphite oxide for heavy metal removal. J Ind Eng Chem 18:1178–1185Google Scholar
  41. Lepore GP, Persaud L, Langford CH (1996) Supporting titanium dioxide photocatalysts on silica gel and hydrophobically modified silica gel. J Photochem Photobiol A 98:103–111Google Scholar
  42. Li Y, Demopoulos GP (2008) Precipitation of nanosized titanium dioxide from aqueous titanium(IV) chloride solutions by neutralization with MgO. Hydrometallurgy 90:26–33Google Scholar
  43. Miao L, Tanemura S, Toh S et al (2004) Fabrication, characterization and Raman study of anatase-TiO2 nanorods by a heating-sol-gel template process. J Cryst Growth 264:246–252Google Scholar
  44. Mills A, Le Hunte S (1997) An overview of semiconductor photocatalysis. J Photochem Photobiol A 108:1–35Google Scholar
  45. Mostafa TB, Darwish AS (2014) An approach toward construction of tuned chitosan/polyaniline/metal hybrid nanocomposites for treatment of meat industry wastewater. Chem Eng J 243:326–339Google Scholar
  46. Nayak PS, Singh BK (2007) Instrumental characterization of clay by XRF, XRD and FTIR. Springer-Verlag, New YorkGoogle Scholar
  47. Ohno T, Mitsui T, Matsumura M (2003) Photocatalytic activity of S-doped TiO2 photocatalyst under visible light. Chem Lett 32:364–365Google Scholar
  48. Ohtani B, Ogawa Y, Nishimoto S (1997) Photocatalytic activity of amorphous-anatase mixture of titanium(IV) oxide particles suspended in aqueous solutions. J Phys Chem B 101:3746–3752Google Scholar
  49. Olad A (2011) Polymer/clay nanocomposites. In: Advances in diverse industrial applications of nanocomposites. InTech, Croatia, p 64Google Scholar
  50. Patil KR, Sathaye SD, Khollam YB et al (2003) Preparation of TiO2 thin films by modified spin-coating method using an aqueous precursor. Mater Lett 57:1775–1780Google Scholar
  51. Pavlidou S, Papaspyrides CD (2008) A review on polymer-layered silicate nanocomposites. Progress in Polymer Science 33(12):1119–1198.  https://doi.org/10.1016/j.progpolymsci.2008.07.008Google Scholar
  52. Peng F, Cai L, Yu H et al (2008) Synthesis and characterization of substitutional and interstitial nitrogen-doped titanium dioxides with visible light photocatalytic activity. J Solid State Chem 181:130–136Google Scholar
  53. Rao BG, Mukherjee D, Reddy BM (2017) Novel approaches for preparation of nanoparticles. Elsevier Inc., AmsterdamGoogle Scholar
  54. Ravelli D, Dondi D, Fagnoni M, Albini A (2009) Photocatalysis. A multi-faceted concept for green chemistry. Chem Soc Rev 38:1999–2011PubMedGoogle Scholar
  55. Robert D, Malato S (2002) Solar photocatalysis: a clean process for water detoxification. Sci Total Environ 291:85–97PubMedGoogle Scholar
  56. Roy R, Roy RA, Roy DM (1986) Alternative perspectives on “quasi-crystallinity”: non-uniformity and nanocomposites. Mater Lett 4:323–328.  https://doi.org/10.1016/0167-577X(86)90063-7Google Scholar
  57. Ruiz-hitzky E (2001) Molecular access to intracrystalline tunnels of sepiolite. J Mater Chem 11:86–91.  https://doi.org/10.1039/b003197fGoogle Scholar
  58. Rytwo G (2012) The use of clay-polymer nanocomposites in wastewater pretreatment. Sci World J 2012:498503Google Scholar
  59. Rytwo G, Lavi R, Rytwo Y et al (2013) Clarification of olive mill and winery wastewater by means of clay-polymer nanocomposites. Sci Total Environ 442:134–142PubMedGoogle Scholar
  60. Sampath S, Uchida H, Yoneyama H (1994) Photocatalytic degradation of gaseous pyridine over zeolite-supported titanium dioxide. J Catal 149:189–194Google Scholar
  61. Schadler LS, Brinson LC, Sawyer WG (2007) Polymer nanocomposites: a small part of the story. Kluwer Academic Publishers/Plenum Publishers, Boston, MAGoogle Scholar
  62. Sclafani A, Herrmann JM (1996) Comparison of the photoelectronic and photocatalytic activities of various anatase and rutile forms of titania in pure liquid organic phases and in aqueous solutions. J Phys Chem 100:13655–13661Google Scholar
  63. Senevirathna MKI, Pitigala PKDDP, Tennakone K (2005) Water photoreduction with Cu2O quantum dots on TiO2 nano-particles. J Photochem Photobiol A 171:257–259Google Scholar
  64. Sethi D, Sakthivel R (2017) ZnO/TiO2 composites for photocatalytic inactivation of Escherichia coli. J Photochem Photobiol B 168:117–123PubMedGoogle Scholar
  65. Shawky HA (2010) Improvement of water quality using alginate/montmorillonite composite beads. Polym Polym Compos 21:449–456Google Scholar
  66. Shchipunov Y (2012) Bionanocomposites: green sustainable materials for the near future. Pure and Applied Chemistry 84(12):2579–2607.  https://doi.org/10.1351/PAC-CON-12-05-04Google Scholar
  67. Tarr MA (2003) Chemical degradation methods for wastes and pollutants: environmental and industrial applications. M. Dekker, New YorkGoogle Scholar
  68. Thomas S, Stephen R (2010) Rubber nanocomposites: preparation, properties, and applications. John Wiley & Sons, SingaporeGoogle Scholar
  69. Torimoto T, Okawa Y, Takeda N, Yoneyama H (1997) Effect of activated carbon content in TiO2-loaded activated carbon on photodegradation behaviors of dichloromethane. J Photochem Photobiol A 103:153–157Google Scholar
  70. Ugurlu M, Gurses A, Yalcin M, Dogar C (2005) Removal of phenolic and lignin compounds from bleached Kraft mill effluent by Fly ash and Sepiolite. Adsorption 11:87–97Google Scholar
  71. Varghese OK, Gong D, Paulose M et al (2003) Extreme changes in the electrical resistance of Titania nanotubes with hydrogen exposure. Adv Mater 15:624–627Google Scholar
  72. Wang X, Du Y, Jianhong Yang YTJL (2015) Preparation, characterization, and antimicrobial activity of quaternized chitosan/organic montmorillonite nanocomposites. Clin Exp Rheumatol 33:97–103Google Scholar
  73. Wang L, Wang A (2007) Adsorption characteristics of Congo red onto the chitosan/montmorillonite nanocomposite. J Hazard Mater 147:979–985PubMedGoogle Scholar
  74. Wang W, Yang J, Gong Y, Hong H (2013) Tunable synthesis of TiO2/SrO core/shell nanowire arrays with enhanced photocatalytic activity. Mater Res Bull 48:21–24Google Scholar
  75. Wen B, Liu C, Liu Y (2005) Depositional characteristics of metal coating on single-crystal TiO2 nanowires. J Phys Chem B 109:12372–12375PubMedGoogle Scholar
  76. Wu CI, Huang JW, Wen YL et al (2008) Preparation of TiO2 nanoparticles by supercritical carbon dioxide. Mater Lett 62:1923–1926Google Scholar
  77. Wu JM, Qi B (2007) Low-temperature growth of a nitrogen-doped titania nanoflower film and its ability to assist photodegradation of rhodamine B in water. J Phys Chem C 111:666–673Google Scholar
  78. Yi GR, Moon JH, Yang SM (2001) Ordered macroporous particles by colloidal templating. Chem Mater 13:2613–2618Google Scholar
  79. Zhao W, Ma W, Chen C et al (2004) Efficient degradation of toxic organic pollutants with Ni2O3/TiO2-xBx under visible irradiation. J Am Chem Soc 126:4782–4783PubMedGoogle Scholar
  80. Zhou N, Liu Y, Li L et al (2007) A new nanocomposite biomedical material of polymer/Clay-Cts-Ag nanocomposites. Curr Appl Phys 7:58–62Google Scholar
  81. Zhu J, Deng Z, Chen F et al (2006) Hydrothermal doping method for preparation of Cr3+-TiO2 photocatalysts with concentration gradient distribution of Cr3+. Appl Catal B 62:329–335Google Scholar
  82. Zhu Y, Zhang L, Gao C, Cao L (2000) The synthesis of nanosized TiO2 powder using a sol-gel method with TiCl4 as a precursor. J Mater Sci 35:4049–4054Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Soulaima Chkirida
    • 1
  • Nadia Zari
    • 1
  • Abou El Kacem Qaiss
    • 1
  • Rachid Bouhfid
    • 1
    Email author
  1. 1.Laboratory of Polymer Processing, Moroccan Foundation for Advanced Science, Innovation and Research (MAScIR)Institute of Nanomaterials and Nanotechnology (NANOTECH)RabatMorocco

Personalised recommendations