Advertisement

A Comparative Analysis of AS/NZS 4801, ISO 45000 and OHSAS 18001 Safety Management Systems

  • Manikam PillayEmail author
Conference paper
Part of the Advances in Intelligent Systems and Computing book series (AISC, volume 876)

Abstract

Safety management systems (SMS) have been used by many organizations to manage workplace safety for over five decades. Wide ranges of these are available. However, there is very little published research on the strengths and weaknesses of each. This is a significant gap, which this article seeks to address through an integrative review of the published literature, by comparing and contrasting three SMS.

Keywords

Safety management systems Integrative review AS/NZS 4801 OHSAS 18001 ISO 45001 

References

  1. 1.
    Li, Y., Guldenmund, F.: Safety management systems: a broad view of the literature. Saf. Sci. 103, 94–123 (2018)CrossRefGoogle Scholar
  2. 2.
    Swuste, P., et al.: Safety management systems from Three Mile Island to Piper Alpha, a review in English and Dutch literature for the period 1979 to 1988. Saf. Sci. 107, 224–244 (2018)CrossRefGoogle Scholar
  3. 3.
    Swuste, P., et al.: Occupational safety theories, models and metaphors in three decades since World War II, in the United States, Britain and the Netherlands: A literature review. Saf. Sci. 62, 16–27 (2014)CrossRefGoogle Scholar
  4. 4.
    Gallagher, C., Underhill, E., Rimmer, M.: Occupational safety and health management systems in Australia: barriers to success. Policy Pract. Health Saf. 1(2), 67–81 (2003)CrossRefGoogle Scholar
  5. 5.
    Pillay, M.: Improving organizational health and safety performance: theoretical framework and contemporary approaches. Int. J. Manag. Excell. 7(3), 855–866 (2016)CrossRefGoogle Scholar
  6. 6.
    Standards Australia/Standards New Zealand, AS/NZS 4801: 2001-Occupational health and safety management systems-Specification with guidance for use. Standards Australia International, Sydney (2001)Google Scholar
  7. 7.
    Occupational Health and Safety Assessment Series (OHSAS), BS OHSAS 18001:2007 – Occupational health and safety management systems: Requirements. OHSAS Project Group, London (2007)Google Scholar
  8. 8.
    International Organization for Standardization (ISO). ISO 45000 Briefing notes (2018). https://www.iso.org/files/live/sites/isoorg/files/standards/docs/en/iso_45001_briefing_note_EN.pdf
  9. 9.
    International Organization for Standardization (ISO), ISO45001 2018: Occupational health and safety management systems — Requirements with guidance for use. International Standards Organization (2018)Google Scholar
  10. 10.
    Barends, E., Rousseau, D.M., Briner, R.B.: Evidence-Based Management: The Basic Principles. Centre for Evidence-Based Management, The Netherlands (2014)Google Scholar
  11. 11.
    Cooper, H.M.: Scientific guidelines for conducting integrative reviews. Rev. Educ. Res. 52, 291–302 (1982)CrossRefGoogle Scholar
  12. 12.
    Moen, R., Norman, C.: Evolution of the PDCA cycle (2006)Google Scholar
  13. 13.
    Taylor, M.J., et al.: Systematic review of the application of the plan-do-study-act method to improve quality in healthcare. BMJ Qual. Saf. 23, 290–298 (2013)CrossRefGoogle Scholar
  14. 14.
    Darabont, D.C., Antonov, A.E., Bejinariu, C.: Key elements on implementing an occupational health and safety management system using ISO 45001 standard. In: MATEC Web of Conferences, p. 11007. EDP Sciences (2017)Google Scholar
  15. 15.
    Darabont, D.-C., et al.: Managing new and emerging risks in the context of ISO45001 standard. Calitatea 18, 11–14 (2017)Google Scholar
  16. 16.
    Pillay, M., Jefferies, M.C.: A revised framework for managing construction health and safety risks based on ISO 31000. in CIBWO99 International Health and Safety Conference, Benefitting Workers & Society Through Safe(r) Construction. International Council for Research and Innovation in Building and Construction, Belfast (2015)Google Scholar
  17. 17.
    Blewett, V., O’Keeffe, V.: Weighing the pig never made it heavier: auditing OHS, social auditing as verification of process in Australia. Saf. Sci. 49(7), 1014–1021 (2011)CrossRefGoogle Scholar
  18. 18.
    Mahmoudi, S., et al.: Framework for continuous assessment and improvement of occupational health and safety issues in construction health and safety. Saf. Health Work 5(3), 125–130 (2014)CrossRefGoogle Scholar
  19. 19.
    Rostykus, W.G., Ip, W., Dustin, J.A.: Managing ergonomics: applying ISO45001 as a model. Prof. Saf. 61, 34–42 (2016)Google Scholar
  20. 20.
    Yorio, P.L., Willmer, D.R., Moore, S.M.: Health and safety management systems through a multilevel and strategic management perspective: theoretical and empirical considerations. Saf. Sci. 72, 221–228 (2015)CrossRefGoogle Scholar
  21. 21.
    Ghahramani, A.: Factors that influence the maintenance and improvement of OHSAS18001 in adopting companies: a qualitative study. J. Clean. Prod. 137(20), 283–290 (2016)CrossRefGoogle Scholar
  22. 22.
    Quinlan, M., Bohle, P., Lamm, F.: Managing Occupational Health and Safety: A Multidisciplinary Approach, 3rd edn. Palgarve Macmillan, South Yarra (2010)Google Scholar
  23. 23.
    Gallagher, C., Underhill, E.: Managing work health and safety: recent developments and future directions. Asia Pac. J. Hum. Resour. 50(2), 227–244 (2012)CrossRefGoogle Scholar
  24. 24.
    Thomas, M.J.W.: A systematic review of the effectiveness of safety management systems. In: ATSB Transport Sadety Report: Cross-Modal Research Investigation. Australian Transport Safety Bureau, Canberra (2012)Google Scholar
  25. 25.
    Paas, O., Reinhold, K., Tint, P.: OHSAS 18001 contribution to real and formal safety elements in safety management systems in manufacturing. Agron. Res. 13(5), 1260–1274 (2015)Google Scholar
  26. 26.
    Haight, J.M., et al.: Safety management systems: comparing content and impact. Prof. Saf. 59(5), 44–51 (2014)Google Scholar
  27. 27.
    Pillay, M.: Safety management of small-sized chemical waste treatment facilities in Victoria. Aust. Manag. 2(5), 221–231 (2012)Google Scholar
  28. 28.
    Esposito, P.A.: Safety audits: comparing three types of assessments. Prof. Saf. 54(12), 42–43 (2009)Google Scholar
  29. 29.
    Cooklin, A., et al.: Integrated approaches to Occupational health and safety a systematic review. Am. J. Health Promot. 31, 401–412 (2016)CrossRefGoogle Scholar
  30. 30.
    Ahsen, A.V.: The integration of quality, environmental and health and safety management by car manufacturers: a long-term empirical study. Bus. Strateg. Environ. 23, 395–416 (2013)CrossRefGoogle Scholar
  31. 31.
    Makin, A.-M., Winder, C.: Managing hazards in the workplace using organisational safety management systems: a safe place, safe person, safe systems approach. J. Risk Res. 12(3–4), 329–343 (2009)CrossRefGoogle Scholar
  32. 32.
    McLellan, D., et al.: Implementing an Integrated Approach: Weaving Employee Health, Safety and Well-being into the Fabric of your Organization. Havard T C Chan School of Public Health, Boston (2017)Google Scholar
  33. 33.
    Poplin, G.S., et al.: Establishing a proactive safety and health risk management system in the fire service. BMC Public Health 15(407), 1–12 (2015)Google Scholar
  34. 34.
    Rebelo, M.F., Santos, G., Silva, R.: A generic model for integration of quality, environment and safety management systems. TQM J. 26(2), 143–159 (2014)CrossRefGoogle Scholar
  35. 35.
    Olaru, M., et al.: Establishing the basis for development of an organization by adopting the integrated management systems: comparative study of various models and concepts of integration. Procedia Soc. Behav. Sci. 109(1), 693–697 (2014)CrossRefGoogle Scholar
  36. 36.
    Bennett, J., Foster, P.: Developing an industry-specific approach to a safety management system. Policy Pract. Occup. Health Saf. 5(1), 37–59 (2007)CrossRefGoogle Scholar
  37. 37.
    Hollnagel, E.: The changing nature of risk. Ergon. Aust. J. 22(1–2), 33–46 (2008)Google Scholar
  38. 38.
    Hudson, R.: The costs of globalization: producing new forms of risk to health and well-being. Risk Manag. 11(1), 13–29 (2009)CrossRefGoogle Scholar
  39. 39.
    Quinlan, M., Mayhew, C., Bohle, P.: The global expansion of precarious employment, work disorganization, and consequences for occupational health: a review of recent research. Int. J. Health Serv. 31(2), 335–414 (2001)CrossRefGoogle Scholar
  40. 40.
    Benach, J., et al.: Employment, work and health inequalities: a global perspective (2013)Google Scholar
  41. 41.
    Quinlan, M., Johnstone, R.: The implications of de-collectivist industrial relations laws and associated developments for worker health and safety in Australia, 1996–2007. Ind. Relat. J. 40(5), 426–443 (2009)CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.School of Health SciencesUniversity of NewcastleCallaghanAustralia

Personalised recommendations