Advertisement

Spectroscopic Aspects of Polydimethylsiloxane (PDMS) Used for Optical Waveguides

  • Dengke Cai
  • H. Michael Heise
Chapter
Part of the Challenges and Advances in Computational Chemistry and Physics book series (COCH, volume 26)

Abstract

Polydimethylsiloxane polymers were studied for their suitability in optical waveguides. Optical constants of core and clad materials have been measured within the visible and near-infrared spectral range. The absorption loss of PDMS in the datacom region of 600–1600 nm is mainly caused by scattering loss and attenuation by overtone and combination band vibrations of CH containing groups. Based on observed positions of those fundamental, overtone and combination bands and their vibrational assignment, normal vibration frequencies and anharmonicity constants were determined. An empirical correlation between integral band strength and intrinsic absorption loss was derived based on the vibrational spectra of the two materials, providing also estimates for deuterated and halogenated PDMS materials with even lower absorption losses. Besides intrinsic material attenuation, also extrinsic losses from waveguide fabrication have been investigated. Furthermore, multimode waveguides were fabricated with an insertion loss of 0.05 dB/cm at the most frequently applied data communication wavelength of 850 nm. Effects of accelerated ageing have been assessed for the optical characteristics of PDMS materials.

Notes

Acknowledgements

The authors gratefully acknowledge the continued support by Dipl.-Ing. Rüdiger Kuckuk (Leibniz-Institut für Analytische Wissenschaften—ISAS) and Prof. Andreas Neyer (TU Dortmund University). The fruitful cooperation with Wacker Chemie, Burghausen (Germany), is also acknowledged.

References

  1. 1.
    Miller DAB (1997) Physical reasons for optical interconnections. Int J Optoelectronics 11:155–168Google Scholar
  2. 2.
    Groh W (1988) Overtone absorption in macromolecules for polymer optical fibers. Macromol Chem 189:2861–2874CrossRefGoogle Scholar
  3. 3.
    Tanio N, Koike Y (2000) What is the most transparent polymer? Polym J 32:43–50CrossRefGoogle Scholar
  4. 4.
    Ballato J, Foulger S, Smith DW Optical properties of perfluorocyclobutyl polymers. J Opt Soc Am B 20:1838–1843Google Scholar
  5. 5.
    Cai DK, Neyer A, Kuckuk R, Heise HM (2007) Estimation of absorption loss in siloxane-based materials implemented as passive optical interconnects. In: Proceedings of optical fiber communication and exposition (OFC) and national fiber optic engineers conference (NFOEC), Anaheim, CA, paper JWA27Google Scholar
  6. 6.
    Flipsen T, Pennings AJ, Hadziioannou G (1998) Polymer optical fiber with high thermal stability and low optical losses based on novel densely crosslinked polycarbosiloxanes. J Appl Polym Sci 67:2223–2230CrossRefGoogle Scholar
  7. 7.
    Yasuda N, Yamamoto H, Minami S, Nobutoki H, Wada Y, Yanagia S (2002) Novel silicone polymeric material with high thermal stability for optical waveguides. Jpn J Appl Phys 41:624–630CrossRefGoogle Scholar
  8. 8.
    Usui M, Hikita M, Amano TM, Sugawara S, Hayashida S, Imamura S (1996) Low-loss passive polymer optical waveguides with high environmental stability. J Lightwave Technol 14:2338–2343CrossRefGoogle Scholar
  9. 9.
    Su K, DeGroot JV Jr, Norris AW, Lo PY (2006) Siloxane materials for optical applications. Proc SPIE 6029:318–325Google Scholar
  10. 10.
    Xia Y, Whitesides G (1998) Soft lithography. Angew Chem 37:550–575CrossRefGoogle Scholar
  11. 11.
    Cai DK, Neyer A (2007) Realization of Electrical-circuit-board self-packaging. In: Proceedings of IEEE conference on electronic components and technology conference, pp 1368–1374Google Scholar
  12. 12.
    Ma H, Jen AK, Dalton LR (2002) Polymer-based optical waveguides: materials, processing, and devices. Adv Mater 14:1339–1365CrossRefGoogle Scholar
  13. 13.
    Poelman D, Smet PF (2003) Methods for the determination of the optical constants of thin films from single transmission measurements: a critical review. J Phys D Appl Phys 36:1850–1857CrossRefGoogle Scholar
  14. 14.
    Voges E, Petermann K (2002) Optische Kommunikationstechnik. Springer, Heidelberg Chapter 3CrossRefGoogle Scholar
  15. 15.
    Smith AL (1960) Infrared spectra-structure correlations for organosilicon compounds. Spectrochim Acta A 16:87–105CrossRefGoogle Scholar
  16. 16.
    Bokobza L, Buffeteau T, Desbat B (2000) Mid-and near-infrared investigation of molecular orientation in elastomeric networks. Appl Spectrosc 54:360–365CrossRefGoogle Scholar
  17. 17.
    Cai DK (2008) Optical and mechanical aspects on polysiloxane based electrical-optical-circuits-board. Ph.D. thesis, TU Dortmund University. http://dx.doi.org/10.17877/DE290R-8242
  18. 18.
    Cai DK, Neyer A, Kuckuk R, Heise HM (2008) Optical absorption in transparent PDMS materials applied for multimode waveguides fabrication. Opt Mater 30:1157–1161CrossRefGoogle Scholar
  19. 19.
    Cai D, Neyer A, Kuckuk R, Heise HM (2010) Raman, mid-infrared, near-infrared and ultraviolet-visible spectroscopy of PDMS silicone rubber for characterization of polymer optical waveguide materials. J Mol Struct 976:274–281CrossRefGoogle Scholar
  20. 20.
    Siesler H, Ozaki Y, Kawata S, Heise HM (2002) Near-infrared spectroscopy. Wiley-VCH, Weinheim Chapter 2Google Scholar
  21. 21.
    Cai D, Neyer A (2010) Quality standardization for polydimethysiloxane-based optical interconnect production from optical aspects. IEEE Photonic Tech L 22:996–998CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Laboratory of Micro-Structure Technology, Department of Electrical Engineering and Information TechnologyTU Dortmund UniversityDortmundGermany
  2. 2.Interdisciplinary Center for Life SciencesSouth-Westphalia University of Applied SciencesIserlohnGermany

Personalised recommendations