Advertisement

Mechanical Characteristics of SFRC Reinforced by New Engineered Steel Fibre

  • Tomasz Ponikiewski
  • Jacek KatzerEmail author
Chapter
Part of the Advanced Structured Materials book series (STRUCTMAT, volume 95)

Abstract

The last five decades have seen a large research effort focused on fibre reinforced concrete. Most of the research studies have been devoted to the use of steel fibre and mechanical characteristics of fibre reinforced concrete. Only a limited number of research programmes dealt with properties (both geometrical and mechanical) and development of steel fibre. In this paper a new type of engineered steel fibre will be analysed in comparison to commercially available fibre. Properties of concretes reinforced by a small volume of fibre were of special interest. Conducted tests covered both fresh mix behaviour and strength characteristics of hardened concrete.

References

  1. 1.
    En 14651 test method for metallic fibered concrete—measuring the flexural tensile strength (limit of proportionality (lop), residual)Google Scholar
  2. 2.
    En 206 concrete - specification, performance, production and conformityGoogle Scholar
  3. 3.
    Domski, J.: A blurred border between ordinary concrete and SFRC. Constr. Build. Mater. 112, 247–252 (2016)CrossRefGoogle Scholar
  4. 4.
    Domski, J., Katzer, J., Zakrzewski, M., Ponikiewski, T.: Comparison of the mechanical characteristicsof engineered and waste steel fiber used as reinforcement for concrete. J. Clean. Prod. 158, 18–28 (2017)CrossRefGoogle Scholar
  5. 5.
    Herrmann, H., Pastorelli, E., Kallonen, A., Suuronen, J.P.: Methods for fibre orientation analysis of x-ray tomography images of steel fibre reinforced concrete (SFRC). J. Mater. Sci. 51(8), 3772–3783 (2016).  https://doi.org/10.1007/s10853-015-9695-4CrossRefGoogle Scholar
  6. 6.
    Katzer, J., Domski, J.: Quality and mechanical properties of engineered steel fibres used as reinforcement for concrete. Constr. Build. Mater. 34, 243–248 (2012)CrossRefGoogle Scholar
  7. 7.
    Maidl, B.R.: Steel Fibre Reinforced Concrete. Ernst & Sohn, Berlin, Germany (1995)Google Scholar
  8. 8.
    Naaman, A.E.: Engineered steel fibres with optimal properties for reinforcement of cement composites. J. Concr. Adv. Technol. 1(3), 241–252 (2003)CrossRefGoogle Scholar
  9. 9.
    Nawy, E.G.: Fundamentals of High Strength High Performance Concrete. Longman, England (1996)Google Scholar
  10. 10.
    Ponikiewski, T., Katzer, J., Bugdol, M., Rudzki, M.: Determination of 3D porosity in steel fibre reinforced SCC beams using x-ray computed tomography. Constr. Build. Mater. 68, 333–340 (2014).  https://doi.org/10.1016/j.conbuildmat.2014.06.064CrossRefGoogle Scholar
  11. 11.
    Ponikiewski, T., Katzer, J., Bugdol, M., Rudzki, M.: Steel fibre spacing in self-compacting concrete precast walls by x-ray computed tomography. Mater. Struct. 48(12), 3863–3874 (2015).  https://doi.org/10.1617/s11527-014-0444-yCrossRefGoogle Scholar
  12. 12.
    di Prisco, M., Plizzari, G., Vandewalle, L.: Fibre reinforced concrete: new design perspectives. Mater. Struct. 42(9), 1261–1281 (2009).  https://doi.org/10.1617/s11527-009-9529-4CrossRefGoogle Scholar
  13. 13.
    Seitl, S., Kersner, Z., Bilek, V., Knesl, Z.: Fatigue parameters of cement based composites with various types of fiber. Key Eng. Mater. 417–418, 129–132 (2012)Google Scholar
  14. 14.
    Seitl, S., Simonova, H., Kersner, Z., Fernandez-Canteli, A.: Evaluation of concrete fatigue measurements using standard and non-linear regression model. Appl. Mech. Mater. 10, 121–126 (2011)Google Scholar
  15. 15.
    Suuronen, J.P., Kallonen, A., Eik, M., Herrmann, H., Serimaa, R.: Determination of fiber orientation in steel fiber reinforced concrete by x-ray microtomography. In: Proceedings of Physics Days 2012, p. 188. The Finnish Physical Society (2012)Google Scholar
  16. 16.
    Suuronen, J.P., Kallonen, A., Eik, M., Puttonen, J., Serimaa, R., Herrmann, H.: Analysis of short fibres orientation in steel fibre reinforced concrete (SFRC) using x-ray tomography. J. Mater. Sci. 48(3), 1358–1367 (2013).  https://doi.org/10.1007/s10853-012-6882-4CrossRefGoogle Scholar
  17. 17.
    Vicente, M.A., González, D.C., Mínguez, J.: Determination of dominant fibre orientations in fibre-reinforced high-strength concrete elements based on computed tomography scans. Nondestr. Test. Eval. 29(2), 164–182 (2014).  https://doi.org/10.1080/10589759.2014.914204CrossRefGoogle Scholar
  18. 18.
    Zollo, R.F.: Fiber-reinforced concrete: an overview after 30 years of development. Cement Concr. Compos. 19(2), 107–122 (1997).  https://doi.org/10.1016/S0958-9465(96)00046-7CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Silesian University of TechnologyGliwicePoland
  2. 2.Koszalin University of TechnologyKoszalinPoland

Personalised recommendations